GoVideo DVP950 manual VHS Hi-FI Stereo System MTS Broadcast, MTS Multi-Channel TV Sound

Page 26

VCR Operation (Continued)

VHS Hi-FI Stereo System/

MTS Broadcast

This VCR is equipped with the VHS Hi-Fi audio sound system for recording and playback. The information below gives a brief description of Hi-Fi audio and how to record and play a tape in the Hi-Fi audio mode.

MTS (Multi-Channel TV Sound)

This VCR will decode MTS stereo and bilingual (SAP) off-the-air broadcast sound signals. It also decodes stereo TV sound from local cable companies, as long as they operate on assigned cable frequencies and use the EIA-recommended MTS stereo/bilingual TV sound sys- tem.

Playback with Hi-Fi Stereo Audio Sound

A stereo TV with AUDIO/VIDEO input jacks or a stereo audio system is required for true stereo playback. To experience the full and rich stereo sound available with Hi-Fi recorded tapes, we recommend the connection of this unit to a home stereo audio system.

Set the AUDIO MODE item to HI-FI on the VCR

1 SETUP menu .

SCREEN DISPLAY:

 

LANGUAGE:

 

AUDIO MODE:

HI-FI

BROADCAST TYPE:

 

AUDIO OUTPUT:

 

SELECT

ADJUST

TO EXIT PRESS

 

2position.

(STEREO) POSITION: The left channel sound (L) is heard from the left speaker and the right channel soundSet the AUDIO OUTPUT item to STEREO

(R) is heard from the right speaker.

(LEFT) POSITION: The left channel sound (L) is heard from both speakers.

(RIGHT) POSITION: The right channel sound (R) is heard from both speakers.

SCREEN DISPLAY:

 

LANGUAGE:

 

AUDIO MODE:

 

BROADCAST TYPE:

 

AUDIO OUTPUT:

STEREO

SELECT

ADJUST

TO EXIT PRESS

 

Insert a cassette and press PLAY.

3 Adjust volume at your stereo system.

Multichannel TV Sound Indicator (MTS)

Shows On-screen as illustrated below when ENTER is pressed.

One or both of the indicators will light, depending on the MTS broadcast.

TV screen

 

 

STEREO

CH 4

 

 

 

 

Lights up when a stereo broadcast

STEREO/SAP

 

 

is being received.

 

 

 

 

 

SAP

 

 

 

 

 

 

Lights up when a SAP BILINGUAL

 

 

 

broadcast is being received.

If only the STEREO appears on the TV screen.

The VCR can record in stereo onto the VHS Hi-Fi audio tracks when the BROADCAST TYPE item is in the STEREO position. The VCR will also record mono audio onto the mono audio track.

If only the SAP appears on the TV screen.

Select the BROADCAST TYPE item to SAP.

If both the STEREO/SAP appears on the TV screen

Use the BROADCAST TYPE item to select the desired record- ing mode (STEREO or SAP).

SAP (Second Audio Program) Recording

Some stations transmit a Second Audio Program, which is used for a second language or additional information. When the station broadcasts a Second Audio Program, follow the procedure below to record the SAP.

1 Insert a video cassette that the safety tab is in place.

2SETUP menu).

Do this if only the SAP appears on the TV screen or you know the program will use the SAP.Set the BROADCAST TYPE item to SAP (VCR

SCREEN DISPLAY:

 

LANGUAGE:

 

AUDIO MODE:

 

BROADCAST TYPE:

SAP

AUDIO OUTPUT:

STEREO

SELECT

ADJUST

TO EXIT PRESS

 

3 Set the desired recording speed (SP or EP) by pressing SP/EP.

4 Select the desired channel. The SAP should appear on the TV screen.

Press REC once

5 You are now recording the program you see and hear on the TV.

6Press STOP to stop recording.

26

Image 26
Contents Page Safety Precautions Regulatory Information FCC PartPower-Cord Protection Power SourcesCleaning Power LinesReplacement parts AccessoriesDamage Requiring Service Safety CheckTable of Contents Before Use Remote control battery installationRemote Control Operation Range Playable DiscsPrecautions About SymbolsFront Panel Display Window Remote Control Connect the VHF/UHF/CATV antenna to this terminal Plug into the power sourceRear Panel Connect to a TV with RF coaxial inputsConnecting Antenna/Cable TV to ConnectionsRF coaxial connection Connections Basic TV ConnectionsOptional TV Connections Audio/Video connectionDigital Multi-channel sound Accessory Audio/Video A/V Connections toConnections Optional Equipment Connections Amplifier ReceiverMenu Selection VCR Setup On-Screen Display OSDSetting the On-Screen Display VCR Setup VCR Setup Menu Channel SelectionAuto Clock Set VCR Setup Setting the ClockPress Menu when finished Manual Clock SetOn-screen display operation DVD Setup General InformationOn-Screen Display Language DVD Setup Initial SettingsInitial Settings General Operation PictureOthers DVD SetupSound Rating DVD Password DVDParental Control Changing the 4-digit codeVCR Operation Normal Playback Special Effect PlaybacksPress 1 or 2 to choose the Program No Timer RecordingTimer Record menu will appear Program Priority Checking Erasing the Timer ProgramVCR Operation To extend the Recording Time One-Touch RecordingChecking the Recording Time Dubbing and EditingMTS Multi-Channel TV Sound Multichannel TV Sound Indicator MTSVHS Hi-FI Stereo System MTS Broadcast Playback with Hi-Fi Stereo Audio SoundReal-Time Counter VCR Operation Tape Counter Memory FeatureAdditional Information Counter Memory FunctionGeneral Features DVD and Audio CD Operation Playing a DVD and Audio CDRandom CD DVD and Audio CD Operation General FeaturesSearch DVD CD Repeat DVD CDMark Search Time SearchZoom DVD Changing the Audio Language DVDDVD and Audio CD Operation Special DVD Features Programmed Playback with Audio CDAbout MP3 MP3 OperationPlaying MP3 Discs MP3 disc compatible with this DVD+VCR is limited as followsErasing a Track from Program List MP3 Operation Programmed Playback with MP3 DiscsRepeat Playback with MP3 Discs Erasing the Complete Program ListTroubleshooting Symptom Cause CorrectionMoisture Condensation Language Code List Code LanguageDVD Specification Technical SpecificationsVCR Specification GeneralWhat is Covered and How Long Warranty DVD+VCR Limited WarrantyWho Provides the Limited Warranty Who is Protected