JVC BR-DV6000E instruction manual Counter display, 00 00 00

ON-SCREEN DISPLAY						– Status display – (continued)
			3 2 K C H – 1 / 2			S P 0 0 0 m i n
			A S S E M
				W A R N I N G 7 0 0 1
				D R U M MO T O R F A I L U R E
				R E C	I N H I B I T
		0 3 / 0 4 / 0 3				S T A N D B Y - O F F
		1 1 : 2 0 : 0 0			T C R 0 2 : 0 0 : 0 0 : 0 0
No.	Item					Description
3	Counter display			Displays the CTR counter, time code or user’s bit. The dis-
				played contents can be selected using the COUNTER switch.

•CTL counter: It will be displayed if the COUNTER switch is set to CTL. The counter shows a 7-digit number (hour, minute, second and frame) with + or – and “CTL” at the beginning, e.g., CTL- 9:30:20:10

• Time code : It will be displayed if the COUNTER switch is set to TC. The time code shows an 8-digit number (hour, minute, second and frame)

At playback, the time codes recorded on the tape are displayed.

	The prefix indicates the time code mode.
TCG	: Time code generator data
TCR	: Time code reader data

DTCG : Time code data received from the DV IN / OUT terminal

ETCG : External time code generator data

Depending on the framing mode, the symbols for the sec- onds and frames are different (only for NTSC).

00 : 00 : 00 : 00

Dot (.) for the drop frame mode ¥ Colon (:) for the non-drop frame mode

• User’s bit : it will be displayed if the COUNTER switch is set to UB.

The user’s bit is an 8-digit number (each digit is a number or character from 0 – F).

	The prefix indicates the user’s bit mode.
UBG	: User’s bit generator data
UBR	: User’s bit reader data

DUBG : User’s bit reader data received from the DV IN /

OUT terminal

EUBG : External user’s bit generator data

Memo

●The position of the counter display can be changed with COUNTER POSI in the DISPLAY Menu screen.

●The counter display can be turned on/off with TIME CODE in the DISPLAY Menu screen.

E-22