JVC BR-DV6000E Loading the cassette tape, Ejecting the cassette tape, Loading/Ejecting cassette

Page 38

PREPARATION

– Loading/Ejecting cassette –

Use standard DV cassette tapes or mini DV cassette tapes.

				Eject button			Cassette LED
						OPERATE
Mini	MENU	DISP	RESET	A.DUB	REC	PLAY	PAUSE
	SEARCH–	SET	SEARCH+
				EJECT	REW	STOP	FF
MIC	HOLD	BLANK	CUE UP

PHONES	REC LEVEL				AUDIO	INPUT	REMOTE
			COUNTER MONITOR OUTPUT SELECT				REMOTE
			CTL	L	CH-1/2	DV
			TC	MIX	MIX	LINE
	CH-1/3	CH-2/4	UB	R	CH-3/4	Y/C	LOCAL
	CH-1/3	CH-2/4				(CPN)	LOCAL

				Guide
						OPERATE
Mini	MENU	DISP	RESET	A.DUB	REC	PLAY	PAUSE
	SEARCH–	SET	SEARCH+

				EJECT		REW	STOP	FF
MIC	HOLD	BLANK	CUE UP
	PHONES	REC LEVEL				AUDIO	INPUT	REMOTE
				COUNTER MONITOR OUTPUT SELECT				REMOTE
				CTL	L	CH-1/2	DV
				TC	MIX	MIX	LINE
		CH-1/3	CH-2/4	UB	R	CH-3/4	Y/C	LOCAL
		CH-1/3	CH-2/4				(CPN)	LOCAL

Standard DV tape

Switch

REC

SAVE

Mini DV tape

Loading the cassette tape

1. Check the cassette tape.

• Setting the rear switch.

Push it to “REC” for recording

To prevent its contents from being erased accidentally, push it to

“SAVE”.

• Ensure that the tape is not loosened.

2. Ensure that no cassette tape is loaded.

With no cassette tape loaded, the cassette LED is off.

When no cassette tape is loaded, the status display for the VCR

operation mode shows “NO CASSETTE” on the monitor or the

LCD.

3 2 K C H – 1 / 2

0 3 / 0 4 / 0 3

1 1 : 2 0 : 0 0

S P 0 0 0 m i n

N O C A S S E T T E T C R 0 2 : 0 0 : 0 0 : 0 0

3. Load the cassette tape.
•	Insert a standard DV cassette tape into the tape-loading slot.
•	For a mini DV cassette tape, load it in between the left and right
	guides.

Set the tape window face up and push the cassette tape in slowly until it is drawn in automatically.

➞When the cassette tape is loaded, the status display indicates “STANDBY-ON”.

VCR mode status display

Memo

●The cassette tape can be loaded/ejected even when BR-DV6000 is in the OPERATE OFF mode.

●The loading/ejecting ac- tion of the cassette tape takes about 6 seconds.

❈If the STANDBY-ON mode is left as is, it goes into the STANDBY- OFF mode.

In the STANDBY-OFF mode, press the STOP button to return to the STANDBY-ON mode.

Ejecting the cassette tape

1. Press the EJECT button of BR-DV6000.

➞While the cassette tape is being ejected, the status display flashes “EJECT”.

2.Remove the cassette tape.

E-38

Image 38

Contents BR-DV6000E LLT0034-002B-HPort Cable Length Safety Precautions Recording/playback with an external timer Both Ntsc and PAL signals supportedBackup recording function DV formatTable of Contents Place of storage and use IntroductionRemarks of usage Handling the unit Head cleaning Regular maintenance Regular maintenance Maintenance consultationMemo Cleaning tapeCassette tape Remarks on the use of tapeIt is used at a place of high humidity CondensationOver 10 years Head drum VideotapeCassette loading slot/LED Names and Functions of PartsFront panel Operate button/LED FF button/LED Play button/LED Pause button/LED Stop buttonSwitching is invalid during recording 4REMOTE/LOCAL switch Input Select switchAudio Output switch Memo Mote SEL JVC The following information is also dis- played Audio Monitor switchCounter switch Reset button REC Level Volume for audio recording level for CH1/3 CH2/4@ Phones Headphone volume Phones terminalSpecial functions/Setting buttons Video Y/C in terminal 4-PIN Rear panelVideo Line in terminal BNC Video Line OUT terminal BNCTime Code OUT terminal BNC Sync in synchronization input Terminal BNCTime Code in terminal BNC CH1/3 Audio in terminal RCASignal GND terminal DC power input terminal 2-PIN Timer recording/playbackSwitch DC power cord clamp Mini jack› REMOTE2 JVC Bus terminal 12-PIN ¤ Serial Remote OUT terminal mini jack‹ REMOTE1 RS-422A terminal Slot cover for an optional boardOn-screen display Description Operation ON-SCREEN DisplayOn-screen display Sampling frequency/audio Status displayMemo Output CHCounter display 00 00 00Display Description Insert editing in the 32 k audio modeStatus/Event display Display displayed during operationAlarm display Blank DUB Inhibit DUB InhibitREC TAB Dvcam Edit InhibitLCD LCD display mode enlarged displayLCD display It is displayed when condensation occurs Displays the framing mode of the time codeDisplays the operation mode of the VCR Drop frame Ntsc only Input signal Connecting video signals Output signal Connection Synchronization signal Headphone terminal Connecting audio signalsAudio Output switches and output channels CH1 CH2 MIXMicrophone input terminal Connecting to a monitor TVDigital output Digital input Remote extension cable Connecting to editing sytem Related VCRs DV cable When an RS-422A-compatible remote controller is used Connection Connection with serial remote terminals Dubbing with 1 VCR Alarm message Connecting the AC adapter DC in terminal Timer switch Connect the supplied AC adaptor to BR-DV6000Turning on/off the power Turning on the powerTurning off the power PreparationRemote controller and operation lock mode Selecting the operating method main unit/remote controllerOperation Lock mode Operation method main unitLoading/Ejecting cassette Loading the cassette tapeEjecting the cassette tape Setting the display time of the LCD display Setting the LCD displayAdjusting the LCD display Selecting the LCD status displaySetting the date and time in the Clock Adjust Menu screen Setting date and timeSetting/Displaying date and time Display 2/2 Menu screen Selecting date/time displayOn-screen status display Setting RecordingRecording index signals Recording procedurePress the Pause button while holding down the A.DUB button Audio dubbingPress the Play button to play the tape Press the Play buttonRecording begins on the source unit RECORDING- Backup recording function For using GY-DV5000 as the source unit Output from the Serial Remote OUT terminal. Only with Oper Recording Recording with serial remote terminalsBR-DV6000 ATE onSet the time, etc., of the external timer External timer recordingAdjust the recording level of sound LCD display System Menu screen Setting the switches on the front panelPlayback Video MenuFast forward/rewind Basic playback procedurePlayback of tapes recorded in the Ntsc format Special playback functions Search modeFrame-advance playback Search speedREW button Increasing the playback speed by 7%Decreasing the playback speed by 10% Search function Index searchBlank search In the Stop mode, press the Blank buttonRepeat operation Repeat Mode in the System 1/2 Menu screenRepeat playback Index repeat playbackClearing registered cue-up points For details on time code setting and recordingRegistering cue-up points Multi cue-upSearching cue-up points Changing cue-up pointsExiting the Multi Cue-up screen Set up the time, etc., of the external timer External timer playbackMode, the timer symbol lights up in green Connect the supplied AC adapter BR-DV6000 Dubbing machineTime Code Displaying the time codeFREE-RUN Presetting the time codeREC-RUN TCG Source Internal TCG Select Preset TCG Mode Recording from preset dataPreset time code Recording the time codeSelect the Recording mode TCG Source Internal TCG Select Regen TCG ModeNing mode as the tape Recording time code, input to the DV IN/OUT terminal TC/UB/CLOCK1/2 Menu screen Front switchesRecord time codes from an external time code generator Set TCG Source to ÒexternalóPlaying back the time code Set the Counter switch to Òtcó or ÒubóPress the Play button to go to the Playback mode Monitor / LCD Status displayEdit Editing with an RS-422A/JVC bus edit remote controller Following editing mode is not available INS A34 INS TC Remote 2/2 Menu screen Editing procedure with BR-DV6000 Remote 1/2 Menu screen To edit with DV connectionMaking prerecorded base tape used as editing recorder Setting the Time Code mode used as editing recorder Setting of RM-G820 Confirmation by preview editingEdit Using a non-linear editing systemRemote FF/REW Mode Controller Type in the Remote 2/2 Menu screenMenu Screens Structure of the Menu screensDisplaying the Menu screen items for setting Setting the menus Set BR-DV6000 to the Stop or Still mode TOP Menu screenSystem 2/2 Menu screen I N M O D E E O F F D E X W R I T E P L I C a T I O NDescription of the Menu screens TOP Menu screenSystem Menu screens System 1/2 menu55MIN Backup REC25MIN 75MINMenu Screens Description of the Menu screens System 2/2 MenuRemote Menu screens Remote 1/2 Menu screen Remote 2/2 Menu screen Synchroni DelayPB Start ZationAudio Menu screen Video Menu screen TC/UB/CLOCK Menu screens TC/UB/CLOCK 1/2 Menu screenBIT PAL Adjust TC/UB/CLOCK 2/2 Menu screen Date RECDisplay Menu screens Display 1/2 Menu screen Display 2/2 Menu screen Command tables RS-232C Interface 9PIN D-Sub Pin No RS-232C specificationsAscii code table RS-232C commands PreparationCommand Description Return commands from the VCR Error commandsExample of Clear Error RS-232C Interface RS-232C commands Second byte Setup preset commands First byte Bit No Status If the bit is Third byteExample Check the Sync Select setting Menu switch setup commandED Memory SW Preset B/J1 Example Set Sync Select to ExternalMenu System MenusD1/D2 Set value Corresponding bit values D1/D2 Remote Menus Menu Set value TC/UB/CLOCK Menus Audio Menus Video Menus 12H 24H Display MenusMAX5 Alarm display Displayed regardless of the Display mode Others Warning display Displayed regardless of the Display mode Troubleshooting ¥ The System 1/2 Menu screen is displayed Set BR-DV6000 to the Stop modeChecking the hour meter Press the Menu button to return to the normal screen RS-232C interface board SA-K46U XLR in board SA-X61U Installing SA-X61U or SA-X62UOptional devices XLR OUT board SA-X62UHexagonal screws Installing SA-K46U RS-232C interface boardInstall the SA-K46U Remove the RS-422A Remote 1 terminalSpecifications External dimensions Unit mm 212Page Victor Company of JAPAN, Limited