JVC BR-DV6000E Condensation, Over 10 years, It is used at a place of high humidity

Page 9

For recording and storing videotapes in the best condition

Observe the following instructions for the best recording and storage of videotapes.

Take care of the conditions of handling videotapes.

It is recommended that you record and store videotapes in the environment below.

 

 

 

Storage

 

Recording

 

 

 

 

Short period

 

Long period

 

 

(Up to 10 years)

 

(Over 10 years)

 

 

 

 

 

Temperature

17°C to 25°C

15°C to 23°C

 

15°C to 19°C

 

 

 

 

 

Humidity

30% to 70%

40% to 55%

 

25% to 35%

 

 

 

 

 

Hourly temperature change

Less than 10°C

 

 

 

 

 

 

Hourly humidity change

Less than 10%

 

 

 

 

 

 

Do not leave the videotapes neglected for a long period.

If videotapes are left wound for a long period of time, it may result in distortion of the tape. Also it may cause tape-to-tape adhesion (known as blocking). It is recommended that videotapes be unspooled and rewound once a year for refreshing.

When tapes are not in use, store them in cases and on end.

Storage cases protect videotapes from humidity, dust and ultraviolet. Keep tapes in cases and do not store them lying flat. When housed in a horizontal position, pressure from other tapes can cause distortions and deformations of the tape edges.

Condensation

When this unit is moved from a cold to a warm place abruptly, the vapor in the warm air will come into contact with the head drum or the tape guides, which are not warmed enough. When chilled, the vapor turns into droplets of water. This state is known as condensation. When condensation occurs, the videotape adheres to the head drum or the tape guides and will be damaged.

Condensation occurs on this unit in the fol- lowing circumstances:

*It is moved abruptly from a cold place to a warm place.

*It is used in a place immediately after the heater has been turned on, or when cold breeze from an air-conditioner blows onto it.

*It is used at a place of high humidity.

Head drum

Videotape

When condensation occurs, the monitor dis- plays the following warning:

CONDENSATION ON DRUM

Leave the unit with the power ON and wait until the WARNING message disappears.

Prevention of condensation

When transporting BR-DV6000 from a cold to a warmer place abruptly, first remove the cassette tape. Then place BR-DV6000 in a plastic bag and seal it before transporting.

Take out BR-DV6000 from the sealed plastic bag only after it has the same temperature as the surroundings.

When a cassette tape is loaded, do not trans- port e.g., from a cold outdoor place to a warm room thus subjecting the unit to drastic tem- perature changes.

After moving the unit, do not use it until the inner mechanism stabilizes.

E-9

Image 9
Contents LLT0034-002B-H BR-DV6000EPort Cable Length Safety Precautions Backup recording function Both Ntsc and PAL signals supportedRecording/playback with an external timer DV formatTable of Contents Remarks of usage Introduction Place of storage and use  Handling the unit Regular maintenance Regular maintenance Head cleaning Maintenance consultationCassette tape Cleaning tapeMemo Remarks on the use of tapeOver 10 years CondensationIt is used at a place of high humidity Head drum VideotapeFront panel Names and Functions of PartsCassette loading slot/LED Operate button/LED Pause button/LED  Play button/LED FF button/LED  Stop buttonAudio Output switch Memo 4REMOTE/LOCAL switch Input Select switchSwitching is invalid during recording Mote SEL JVCAudio Monitor switch Counter switch The following information is also dis- played @ Phones Headphone volume REC Level Volume for audio recording level for CH1/3 CH2/4Reset button Phones terminalSpecial functions/Setting buttons Video Line in terminal BNC Rear panelVideo Y/C in terminal 4-PIN Video Line OUT terminal BNCTime Code in terminal BNC Sync in synchronization input Terminal BNCTime Code OUT terminal BNC CH1/3 Audio in terminal RCASwitch DC power input terminal 2-PIN Timer recording/playbackSignal GND terminal DC power cord clamp Mini jack‹ REMOTE1 RS-422A terminal ¤ Serial Remote OUT terminal mini jack› REMOTE2 JVC Bus terminal 12-PIN Slot cover for an optional boardON-SCREEN Display On-screen displayOn-screen display Description Operation Memo Status displaySampling frequency/audio Output CH00 00 00 Counter displayStatus/Event display Insert editing in the 32 k audio modeDisplay Description Display displayed during operationAlarm display REC TAB DUB InhibitBlank DUB Inhibit Dvcam Edit Inhibit LCD display mode enlarged display LCD displayLCD Displays the operation mode of the VCR Displays the framing mode of the time codeIt is displayed when condensation occurs Drop frame Ntsc only Output signal Connecting video signals Input signal Connection Synchronization signal Audio Output switches and output channels Connecting audio signalsHeadphone terminal CH1 CH2 MIXDigital output Connecting to a monitor TVMicrophone input terminal Digital input Related VCRs Connecting to editing sytem Remote extension cable  DV cable When an RS-422A-compatible remote controller is used Dubbing with 1 VCR Connection Connection with serial remote terminalsDC in terminal Timer switch Connecting the AC adapterAlarm message Connect the supplied AC adaptor to BR-DV6000Turning off the power Turning on the powerTurning on/off the power PreparationOperation Lock mode Selecting the operating method main unit/remote controllerRemote controller and operation lock mode Operation method main unitLoading the cassette tape Ejecting the cassette tapeLoading/Ejecting cassette Adjusting the LCD display Setting the LCD displaySetting the display time of the LCD display  Selecting the LCD status displaySetting date and time Setting/Displaying date and timeSetting the date and time in the Clock Adjust Menu screen Selecting date/time display On-screen status display Display 2/2 Menu screen Recording SettingRecording procedure Recording index signalsPress the Play button to play the tape Audio dubbingPress the Pause button while holding down the A.DUB button Press the Play buttonRECORDING- Backup recording function  For using GY-DV5000 as the source unitRecording begins on the source unit BR-DV6000 Recording Recording with serial remote terminalsOutput from the Serial Remote OUT terminal. Only with Oper ATE onAdjust the recording level of sound External timer recordingSet the time, etc., of the external timer LCD displayPlayback  Setting the switches on the front panel System Menu screen  Video MenuBasic playback procedure Playback of tapes recorded in the Ntsc formatFast forward/rewind Frame-advance playback Search modeSpecial playback functions Search speedIncreasing the playback speed by 7% Decreasing the playback speed by 10%REW button Blank search Index searchSearch function  In the Stop mode, press the Blank buttonRepeat playback  Repeat Mode in the System 1/2 Menu screenRepeat operation Index repeat playbackRegistering cue-up points For details on time code setting and recordingClearing registered cue-up points Multi cue-upChanging cue-up points Exiting the Multi Cue-up screenSearching cue-up points Mode, the timer symbol lights up in green External timer playbackSet up the time, etc., of the external timer  Connect the supplied AC adapter Dubbing machine  BR-DV6000Displaying the time code Time CodePresetting the time code REC-RUNFREE-RUN Preset time code Recording from preset dataTCG Source Internal TCG Select Preset TCG Mode Recording the time codeNing mode as the tape TCG Source Internal TCG Select Regen TCG ModeSelect the Recording mode Recording time code, input to the DV IN/OUT terminalRecord time codes from an external time code generator  Front switches TC/UB/CLOCK1/2 Menu screen Set TCG Source to ÒexternalóPress the Play button to go to the Playback mode Set the Counter switch to Òtcó or ÒubóPlaying back the time code Monitor / LCD Status displayEdit Editing with an RS-422A/JVC bus edit remote controller INS A34 INS TC  Following editing mode is not available Remote 1/2 Menu screen Editing procedure with BR-DV6000 Remote 2/2 Menu screen  To edit with DV connection Setting of RM-G820  Setting the Time Code mode used as editing recorderMaking prerecorded base tape used as editing recorder Confirmation by preview editingRemote FF/REW Mode Using a non-linear editing systemEdit Controller Type in the Remote 2/2 Menu screenStructure of the Menu screens Menu Screens Set BR-DV6000 to the Stop or Still mode Setting the menusDisplaying the Menu screen items for setting TOP Menu screenI N M O D E E O F F D E X W R I T E P L I C a T I O N System 2/2 Menu screenSystem Menu screens TOP Menu screenDescription of the Menu screens  System 1/2 menu25MIN Backup REC55MIN 75MIN System 2/2 Menu Menu Screens Description of the Menu screens Remote 1/2 Menu screen Remote Menu screens Remote 2/2 Menu screen PB Start DelaySynchroni ZationAudio Menu screen Video Menu screen  TC/UB/CLOCK 1/2 Menu screen TC/UB/CLOCK Menu screens TC/UB/CLOCK 2/2 Menu screen AdjustBIT PAL Date REC Display 1/2 Menu screen Display Menu screens Display 2/2 Menu screen RS-232C Interface Command tablesRS-232C specifications Ascii code table 9PIN D-Sub Pin No  Preparation RS-232C commandsCommand Description Error commands Return commands from the VCRExample of Clear Error RS-232C Interface RS-232C commands  First byte Bit No Status If the bit is  Setup preset commands Second byte  Third byteED Memory SW Preset B/J1  Menu switch setup commandExample Check the Sync Select setting Example Set Sync Select to ExternalD1/D2  System MenusMenu Set value Corresponding bit values D1/D2Menu Set value  Remote Menus Audio Menus  Video Menus TC/UB/CLOCK Menus  Display Menus MAX512H 24H Others  Alarm display Displayed regardless of the Display mode Warning display Displayed regardless of the Display mode Troubleshooting Checking the hour meter  Set BR-DV6000 to the Stop mode¥ The System 1/2 Menu screen is displayed Press the Menu button to return to the normal screenOptional devices Installing SA-X61U or SA-X62U RS-232C interface board SA-K46U  XLR in board SA-X61U  XLR OUT board SA-X62UInstall the SA-K46U Installing SA-K46U RS-232C interface boardHexagonal screws Remove the RS-422A Remote 1 terminalSpecifications 212  External dimensions Unit mmPage Victor Company of JAPAN, Limited

BR-DV6000E specifications

The JVC BR-DV6000E is a professional DV deck that has become a staple for many video production specialists, offering a blend of robust features and reliable performance. Known for its versatility and user-friendly interface, the BR-DV6000E is designed to meet the needs of various applications, from broadcasting to video editing, making it an essential asset for professional environments.

One of the standout features of the BR-DV6000E is its ability to support multiple formats, including DV, miniDV, and DVCAM. This flexibility allows users to work with different types of media without the need for multiple decks, thus streamlining the workflow in any production setup. Additionally, the deck offers comprehensive compatibility with different video resolutions, ensuring that it meets the varying demands of modern video standards.

The BR-DV6000E is equipped with advanced technologies that enhance its performance. It boasts a high-quality digital video processing engine that ensures superior image quality, along with low noise levels, making it ideal for professional broadcast applications. The deck supports both NTSC and PAL formats, providing users with the freedom to work with international projects seamlessly.

Another notable characteristic of the BR-DV6000E is its robust build quality. Designed for everyday use in demanding environments, the deck features a durable chassis that withstands the rigors of regular operation, while the intuitive front panel layout provides easy access to essential controls and functions. This design not only aids in usability but also enhances productivity during editing sessions.

For connectivity, the BR-DV6000E offers a range of input and output options, including FireWire (IEEE 1394), which enables fast data transfer and easy integration with non-linear editing systems. This connectivity is crucial for professionals who require quick access to video footage during editing and post-production.

In conclusion, the JVC BR-DV6000E is a highly versatile and reliable DV deck that caters to the needs of professional videographers and broadcasters. With its support for multiple formats, high-quality digital processing, robust build, and extensive connectivity options, it is an invaluable tool for anyone looking to create high-quality video content in an efficient manner. The combination of these features ensures that the BR-DV6000E remains a popular choice among industry professionals, cementing its reputation as a dependable workhorse in the world of video production.