10
plug&play setup
Plug&Play Setup
The TV should be set to its AV mode (if you are using both the RF cable and
|
|
| Start Plug&Play Setup |
|
|
|
|
|
| Plug the mains power cord into a mains outlet. | |
before you start | |||
Check that the | note Do not turn on the VCR or do not press any buttons on the VCR or | ||
connection is completed | Remote Control. | ||
Tune the TV to your | what will happen? The Plug&Play screen | ||
Video Channel or to its | appears on the TV screen. Then press OK. | ||
AV mode |
| ||
Load the batteries into the Remote Control
Refer to the Remote Control diagram on pages 6Ð7
Unless indicated otherwise, use the buttons on the Remote Control
NOTE:
If you have connected your TV to the VCR with only the RF cable and the
The VCR is automatically setting up the tuner channels. This only happens the first time that you plug the main power cord into the main outlet.
When Plug&Play is completed, the Confirmation screen appears.
ACMS
01 | C03 | 00 | ARD | 01 | C03 | 00 | ARD |
|
|
|
| 02 | C02 | 00 | ZDF |
|
|
|
| 03 | S40 | 00 | WDR3 |
|
|
|
| 04 | S11 | 00 | BR3 |
|
|
|
| 05 | C02 | 00 | HR3 |
|
|
|
| 06 | - - | - - | - - - - - |
|
|
|
| 07 | - - | - - | - - - - - |
|
|
|
| 08 | - - | - - | - - - - - |
|
|
|
|
|
| MOVE: |
|
|
|
|
|
|
| DELETE: |
|