JVC HR-J595EK manual Set channel on TV, Access Video Channel Set Mode, Set Video Channel

Page 14

14initial settings

before you start

The power cord must be plugged in and connected to the VCR

The VCR must be turned on

The Remote Control must have batteries inserted

The TV set must be turned on

Video Channel Set

The VCR can send picture signals to the TV set in one of two ways; RF (ordinary cable included with this VCR) and AV (via a 21-pin SCART cable available from TV and Hi-Fi dealers). Depending upon which method you use, the VCR must have the correct method set up in order to work. The Video Channel is originally set to channel 22 but if for any reason this fails to happen, the instructions below describe how to set the Video Channel manually.

Set channel on TV

Select the vacant position 22 on you TV.

Access Video Channel Set Mode

Press obutton on the Remote Control to enter the standby mode. Press and hold PR+ or Ð on the VCR for more than 3 seconds.

Set Video Channel

if you are using both the rf cable and

21-pin SCART cable for connection Press PR+ or Ð to set the Video Channel to OFF.

if you are using only the rf cable for

connection Press PR+ or Ð to set the Video

RF CHANNEL : 22

 

 

 

Channel to a vacant position between 22 and 68

 

 

 

 

 

 

which is not occupied by any station in your area

 

 

 

 

 

 

(refer to station list on pageÊ22).

 

 

 

Exit Video Channel Set Mode

Press o.

To view pictures from your VCR you must now set your TV to either the Video Channel or to AV mode, depending upon your choice above.

Image 14
Contents HR-J595EK Safety Precautions If in doubt Ñ consult a competent electricianMoisture Condensation Some DoÕs And DonÕts On The Safe Use Of EquipmentContents Front panel Rear panel Display Remote control Diagram Key Front Panel Rear Panel Remote ControlWelcome to JVC Getting Everything ReadyScart and rf Plug&Play Setup Start Plug&Play SetupCheck the Results Finish OffPlug&play setup Initial Settings Video Channel Set Access Video Channel Set ModeExit Video Channel Set Mode Set channel on TVSetting the language Language SetSetting the Clock Clock SetAuto Channel Setup Tuner SetManual Channel Setup PR SETChange Station Name Delete a ChannelChange Station Preset Position Fine-Tuning Stored Channels TV Station ID GuideTV Station Channel Number Guide BBC1 BBC2 ITV CH4 CH5Basic Features Play PlaybackLoad a Video Cassette Stop & EjectVideo Heads Cleaning Rewind and Fast ForwardSingle Frame Movement Playback FeaturesPause During Playback Slow MotionSkip Search Variable Speed SearchHigh Speed Search Set the Tape Speed RecordingChoose a Programme Start RecordingChange Display Information Resetting the CounterDisplay Tape Position/Time Counter Instant Timer Recording Get to the Video Plus + Screen Enter the PlusCode NumberEngage Timer Mode Return to Normal ScreenGet to the Programme List Enter Programme DetailsIntelligent LP Recording Check, Cancel & Change Programmes Using the *and Tbuttons and press OKBasic features Advanced Features Picture Control Picture QualityManual Tracking Soundtrack Selection Sound ModesNicam Stereo and Bilingual Broadcasts Advanced features Editing Using Another VCR EditingEditing From a Camcorder Start recorder Press TOther Functions On-Screen Display OSDEz Easy Repeat Playback Rewind Power OffEz Easy Power Off Memory Stop Facility Colour SystemCompatibility Child LockConnection to a Stereo System Questions and Answers PlaybackTroubleshooting Symptom Possible CauseRecording Other Problems List of Terms Memo Memo Memo HR-J595EK