JVC HR-VP470U manual Important Product Safety Instructions

Page 3

IMPORTANT PRODUCT SAFETY INSTRUCTIONS

Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguards, observe the following basic rules for its installation, use and servicing.

ATTENTION:

Follow and obey all warnings and instructions marked on your product and its operating instructions. For your safety, please read all the safety and operating instructions before you operate this product and keep this booklet for future reference.

INSTALLATION

1. Grounding or Polarization

(A)Your product may be equipped with a polarized alternating- current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature.

If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

(B)Your product may be equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature.

If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

2. Power Sources

Operate your product only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. If your product is intended to operate from battery power, or other sources, refer to the operating instructions.

3. Overloading

Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

4. Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against

EN3

5. Ventilation

Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.

•Do not block the openings by placing the product on a bed, sofa, rug or other similar surface.

•Do not place the product in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

6. Wall or Ceiling Mounting

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

ANTENNA INSTALLATION

INSTRUCTIONS

1. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding connectors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

2. Lightning

For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

3. Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

ANTENNA

LEAD IN WIRE

GROUND CLAMP

them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

ELECTRIC SERVICE EQUIPMENT

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING

CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H)

NEC – NATIONAL ELECTRICAL CODE

Page 2 Page 4
Image 3
Page 2 Page 4
Contents HR-VP670U HR-VP470U Do not place the VCR Dear CustomerImportant Product Safety Instructions Should be moved with care. Quick Product and cart combinationContents EN Installing Your NEW VCR Basic ConnectionsVP470U Connect VCR to TV Check ContentsConnect VCR to Power Source Situate VCRAuto Clock Set/Auto Tuner Set Plug & Play SetupPlug & Play EN I Nitial Sett IngsInformation Language Shuttle PLUS%Þ, then Press OK or Shuttle Access Clock SETClock PreparationSemi-Auto Select D.S.T. ModeSET Auto Clock to on Select Host ChannelSET Date Select Time ZoneReturn to Normal Screen SET TimeSET Access Main Menu ScreenAccess Tuner SET Screen TunerAdd Or Delete a Channel Access Manual Channel SET ScreenADD or Skip Desired ChannelSimple Playback Simple Recording Playback Features Activate FRAME-BYFrame Playback Activate HIGH-SPEED Access Distant CodeEngage Manual Tracking Mode Adjust Manual TrackingAuto Picture Access Function SETSelect Auto Picture Mode Layback and Recording FeaturesSET Mode Picture ControlVideo Stabilizer Stop Repeat Start RepeatSuperimpose Select Audio Monitor Select The Soundtrack HR-VP670U OnlyShuttle PLUS%to Advance Access Skip MenuSelect Mode Perform MovieRecord One Program While Watching Another Recording FeaturesEngage TV Mode Select Channel for ViewingTo Record SAP Programs HR-VP670U Only Stereo And SAP Second Audio Program HR-VP670U OnlyVCR Plus+ Timer Programming EN Timer RecordingInput Receiving Channel Number Tion is displayed on Timer-Recording informaPlusCode number you Entered and the matchingInitial SET, then press VCR Plus+ SetupPress CH5, Shuttle Access Guide Channel SET ScreenInput Guide Channel NumberLoad a Cassette Express Timer ProgrammingSET Channel Number Engage Timer ModeRE-ENGAGE Timer Check, Cancel And Revise ProgramsProgram Auto Timer Auto SP→EP TimerPress REC on the front panel Instant Timer Recording ITREngage ITR Mode SET Recording DurationEdit To Another VCR Another VCR Edit From a Camcorder Or Another VCRRecorder Your VCR CamcorderSet to AUX. Press the Number key 0 and/or CH to select F-1 SET RECORDER’S Input ModeSetNOTEthe camcorder to its play mode Set your VCR to its record modeOperate TV TV Multi-Brand Remote ControlTurn on the TV SET TV Brand CodeOperate Cable BOX Cable Box Multi-Brand Remote ControlTurn on the Cable BOX Enter Cable BOX BrandEnter DBS Receiver Brand EN Special FeaturesDBS Receiver Multi-Brand Remote Control Turn on the DBS ReceiverTurn VCR Power on Unplug Vcrs PowerSET Remote Control Plug in Power CordMake sure the cassettes window is Cassette gets stuck partwayRe-perform the VCR Plus+ setup Doesn’t work properly Timer againPlayback EN Questions and AN SwersList Of Terms Express Timer ProgrammingMBR Multi-Brand Remote Code Setting IndexFront View VP470U EN IndexRear View VP670U Remote Control Specification S For Servicing Only in U.S.A HOW to Locate Your JVC Service CenterLimited Warranty Warranty Only in U.S.A. E NEN M EMO Memo HR-VP670U/470U
Top Page Image Contents