JVC HR-VP470U manual Check Contents, Situate VCR, Connect VCR to TV, Connect VCR to Power Source

Page 7

1

2

3

4

5

CHECK CONTENTS

Make sure the package contains all of the accessories

listed in “SPECIFICATIONS” ( pg. 51).

SITUATE VCR

Place the VCR on a stable, horizontal surface.

CONNECT VCR TO TV

The connection method you use depends on the type of

TV you have.

RF Connection

To Connect To A TV With NO AV Input Terminals . . .

a– Disconnect the TV antenna from the TV.

b– Connect the TV antenna cable to the ANT. IN jack

on the rear of the VCR.

c– Connect the supplied RF cable between the RF

OUT jack on the rear of the VCR and the TV’s

antenna terminal. Set TV on CH3 or CH4

corresponding to the CH3 – CH4 switch setting on

the back of the VCR.

AV Connection

To Connect To A TV With AV Input Terminals . . .

a– Connect the antenna, VCR and TV as shown in

the illustration.

b– Connect an Audio/Video Cable between the AUDIO

OUT and VIDEO OUT jacks on the rear of the VCR

and the AV IN jacks on the TV. Set your TV in video

input mode or A/V input mode. Refer to the TV

Instruction Manual.

For HR-VP470U Owners:

If your TV has AUDIO IN L and R connectors, connect

the VCR to the L connector.

CONNECT VCR TO

POWER SOURCE

Connect the power plug to an AC outlet.

The clock and tuner channels will automatically be

set when the antenna is connected and when the AC

is first connected to the VCR ( pg. 8).

(If "Auto" or "CH" is displayed on the front display

panel before the VCR is powered on, the clock and

tuner channels are being set automatically. Wait for

the time to be displayed on the front display panel

before powering on the VCR.)

FINAL PREPARATION FOR

USE

Power on the VCR and select the VCR channel (3 or 4) by setting the switch on the rear of the VCR as shown in the illustration.

You can now perform simple playback ( pg. 16) or simple recording ( pg. 17).

EN7

NOTES:

The VCR channel is the channel on the TV which will display the audio and video signals from the VCR. The VCR's CH3- CH4 switch, on the back of the VCR, sets the VCR channel to CH3 or CH4.

The CH3–CH4 switch is preset to the CH3 position.

Set to CH4 if CH3 is used for broadcasting in your area and set the channel on the TV to correspond to the VCR's CH3– CH4 switch setting.

If RF connection to TV is used, when switching from VCR to TV mode and from TV to VCR it may be necessary to issue a CH UP and then CH DOWN on TV to obtain a good quality picture.

Even if you are using AV cables to connect your VCR to your TV, you must also connect it using the RF cable. This will ensure that you can record one show while watching another ( pg. 26).

For full identification of the VCR's rear panel, refer to the Index (REAR VIEW pg. 49).

Page 6 Page 8
Image 7
Page 6 Page 8
Contents HR-VP670U HR-VP470U Do not place the VCR Dear CustomerImportant Product Safety Instructions Should be moved with care. Quick Product and cart combinationContents Basic Connections EN Installing Your NEW VCRVP470U Connect VCR to TV Check ContentsConnect VCR to Power Source Situate VCRAuto Clock Set/Auto Tuner Set Plug & Play SetupPlug & Play EN I Nitial Sett IngsInformation Language Shuttle PLUS%Þ, then Press OK or Shuttle Access Clock SETClock PreparationSemi-Auto Select D.S.T. ModeSET Auto Clock to on Select Host ChannelSET Date Select Time ZoneReturn to Normal Screen SET TimeSET Access Main Menu ScreenAccess Tuner SET Screen TunerAdd Or Delete a Channel Access Manual Channel SET ScreenADD or Skip Desired ChannelSimple Playback Simple Recording Activate FRAME-BY Playback FeaturesFrame Playback Activate HIGH-SPEED Access Distant CodeEngage Manual Tracking Mode Adjust Manual TrackingAuto Picture Access Function SETSelect Auto Picture Mode Layback and Recording FeaturesPicture Control SET ModeVideo Stabilizer Stop Repeat Start RepeatSuperimpose Select The Soundtrack HR-VP670U Only Select Audio MonitorShuttle PLUS%to Advance Access Skip MenuSelect Mode Perform MovieRecord One Program While Watching Another Recording FeaturesEngage TV Mode Select Channel for ViewingTo Record SAP Programs HR-VP670U Only Stereo And SAP Second Audio Program HR-VP670U OnlyEN Timer Recording VCR Plus+ Timer ProgrammingInput Receiving Channel Number Tion is displayed on Timer-Recording informaPlusCode number you Entered and the matchingInitial SET, then press VCR Plus+ SetupPress CH5, Shuttle Access Guide Channel SET ScreenInput Guide Channel NumberLoad a Cassette Express Timer ProgrammingSET Channel Number Engage Timer ModeCheck, Cancel And Revise Programs RE-ENGAGE TimerProgram Auto Timer Auto SP→EP TimerPress REC on the front panel Instant Timer Recording ITREngage ITR Mode SET Recording DurationEdit To Another VCR Another VCR Edit From a Camcorder Or Another VCRRecorder Your VCR CamcorderSet to AUX. Press the Number key 0 and/or CH to select F-1 SET RECORDER’S Input ModeSetNOTEthe camcorder to its play mode Set your VCR to its record modeOperate TV TV Multi-Brand Remote ControlTurn on the TV SET TV Brand CodeOperate Cable BOX Cable Box Multi-Brand Remote ControlTurn on the Cable BOX Enter Cable BOX BrandEnter DBS Receiver Brand EN Special FeaturesDBS Receiver Multi-Brand Remote Control Turn on the DBS ReceiverTurn VCR Power on Unplug Vcrs PowerSET Remote Control Plug in Power CordMake sure the cassettes window is Cassette gets stuck partwayRe-perform the VCR Plus+ setup Doesn’t work properly Timer againPlayback EN Questions and AN SwersList Of Terms Express Timer ProgrammingMBR Multi-Brand Remote Code Setting IndexFront View VP470U EN IndexRear View VP670U Remote Control Specification S For Servicing Only in U.S.A HOW to Locate Your JVC Service CenterLimited Warranty Warranty Only in U.S.A. E NEN M EMO Memo HR-VP670U/470U
Top Page Image Contents