JVC HR-VP470U manual SET Mode, Picture Control, Video Stabilizer

Picture Control

This feature helps you to adjust the playback picture quality according to your preference. *The default setting is "AUTO."

	ACCESS MAIN MENU
	SCREEN
1 Press MENU.
	ACCESS FUNCTION SET
	SCREEN
	Move the highlight bar (arrow) to "FUNCTION SET" by
	pressing CH5° or SHUTTLE PLUS%Þ, then press OK
2 or SHUTTLE PLUS				%.
	SELECT PICTURE CONTROL
	SET MODE
			HR-VP670U			HR-VP470U
			FUNCTION			FUNCTION
			AUTO PICTURE	ON		AUTO PICTURE	ON
		=PICTURE CONTROL		AUTO	=PICTURE CONTROL		AUTO
			AUTO TIMER	OFF		AUTO TIMER	OFF
			SUPERIMPOSE	ON		SUPERIMPOSE	ON
			AUTO SP=EP TIMER	OFF		AUTO SP=EP TIMER	OFF
			NEXT PAGE			VIDEO STABILIZER	OFF
3			SELECT WITH (5,°) AND (OK)			SELECT WITH (5,°) AND (OK)
			PRESS (MENU) TO END			PRESS (MENU) TO END
	Move the highlight bar (arrow) to "PICTURE CON-
	TROL" by pressing CH 5° or SHUTTLE PLUS %Þ,
	then press OK or SHUTTLE PLUS%to select the
	desired mode.
	AUTO*: Normally select AUTO.
			It automatically adjusts the picture quality.
			* When AUTO PICTURE is set to OFF (				pg.
			20), you can only select NORM instead of
			AUTO.
	EDIT: Select when you dub tapes.
	SOFT: Select when you want to soften the picture.
	SHARP: Select when you want to sharpen the picture.

NOTE:

•When you select EDIT, SHARP or SOFT, the

selected mode will not change until you select again.

•When you select EDIT to dub tapes, be sure to select AUTO (or NORM when AUTO PICTURE is set to OFF) after you finish dubbing the tapes.

RETURN TO NORMAL

SCREEN

4 Press MENU.

NOTE:

Select EDIT when you are dubbing tapes. Refer to page 37.

EN21

Video Stabilizer

By activating the Video Stabilizer you can correct vertical vibrations in the picture when playing back unstable recordings that were made on another VCR. When this function is set to "ON", vertical vibration will be automatically corrected. *The default setting is "OFF".

	ACCESS MAIN MENU
1	SCREEN
	Press MENU.
	ACCESS FUNCTION SET
2	SCREEN
	Move the highlight bar			MAIN MENU
	(arrow) to "FUNCTION
	SET" by pressing CH5° or			=FUNCTION SET
				TUNER SET
	SHUTTLE PLUS%Þ, then			INITIAL SET
	press OK or SHUTTLE
	PLUS%.
				PRESS (5,°), THEN (OK)
				PRESS (MENU) TO END
	ACTIVATE VIDEO
	STABILIZER
	HR-VP670U			HR-VP470U
	FUNCTION			FUNCTION
				AUTO PICTURE	ON
	=AUTO PICTURE	ON
	PICTURE CONTROL	AUTO		PICTURE CONTROL	AUTO
	AUTO TIMER	OFF		AUTO TIMER	OFF
	SUPERIMPOSE	ON		SUPERIMPOSE	ON
	AUTO SP=EP TIMER	OFF		AUTO SP=EP TIMER	OFF
	NEXT PAGE			=VIDEO STABILIZER	ON
	SELECT WITH (5,°) AND (OK)			SELECT WITH (5,°) AND (OK)
	PRESS (MENU) TO END			PRESS (MENU) TO END
3			Move the highlight bar
	PREVIOUS PAGE		(arrow) to "VIDEO
	=VIDEO STABILIZER	ON	STABILIZER" by pressing
	2ND AUDIO RECORD	OFF
	AUDIO MONITOR	HI-FI	CH 5 or SHUTTLE PLUS
			°
			%Þ, then press OK or
			SHUTTLE PLUS%to set to
			"ON".
	SELECT WITH (5,°) AND (OK)
	PRESS (MENU) TO END
	RETURN TO NORMAL
4	SCREEN
	Press MENU.

NOTES:

When you finish viewing the tape, be sure to set it back to "OFF".

Regardless of the setting, this function has no effect during recording and during special-effects playback.

The Superimpose mode indications may jitter vertically when "VIDEO STABILIZER" is set to "ON".

To watch recordings with close-caption, it is necessary to set the Video Stabilizer function to "OFF".