JVC HR-J259EE, HR-J459EE SET Video Channel, Exit Video Channel SET Mode, With AV Connection

Page 5

3

4

SET VIDEO CHANNEL

Set your TV to UHF channel 36.

●If the two vertical white bars appear clearly on the screen as shown in the illustration (☞ "TEST SIGNAL" on page 4), press OK and then go to step 4.

●If the two vertical white bars do not appear clearly, press OK and then TV PROG + or – to set the video recorder to a vacant channel between 28 and 60 which is not occupied by any local station in your area.

(Ex.) If channel 50 is available in your area

Then set your TV to UHF channel 50 and check if the two vertical white bars appear clearly on the screen; if so, go to step 4. If not, re-set the video recorder to another vacant channel and try again.

NOTES:

●If you set the video recorder to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.

●If you cannot obtain the two vertical white bars clearly with any channel between 28 and 60, consult your JVC dealer.

EXIT VIDEO CHANNEL SET MODE

Press to finish the setting.

EN5

With AV Connection

IMPORTANT:

Before performing the following steps, make sure the recorder's power is off and there is no cassette inserted in the recorder.

ACCESS VIDEO CHANNEL SET MODE

1 Hold down STOP/EJECT on the recorder until the display panel shows the following.

SET VIDEO CHANNEL

2 Press OK, then press TV PROG – until the display panel shows the following.

Now the video channel is set to off (– –).

EXIT VIDEO CHANNEL SET

MODE

3 Press to finish the setting.

To view picture signals from the video recorder, set your TV to its AV mode.

Image 5

Contents HR-J459EE HR-J259EE Auto Head Cleaner Safety PrecautionsHR-J459EE HR-J259EEBasic Connections Check ContentsSituate Recorder Connect Recorder to MainsVideo Channel Set Access Video Channel SET ModeEN I Nitial Sett Ings With RF ConnectionPress to finish the setting Exit Video Channel SET ModeSET Video Channel With AV ConnectionSelect Language Auto Set UpSET Time SET DateStart Auto Channel SET Appears. When Auto Channel Set is completedPress Menu Auto SET screen AppearsAccess Initial SET Screen Access Main Menu ScreenSelect Language Turn on the RecorderClock Set Access Clock SET ScreenTurn the Recorder on SET DateInitial Settings ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Displays Return to NormalColour System Set Access Main Menu ScreenMode Information on Colour SY Stem E NLoad a Cassette Basic PlaybackPoint Start PlaybackSearch Playback FeaturesPlayback Activate HIGH-SPEED SearchOverride Automatic Tracking Adjust Tracking ManuallyReturn to Automatic Tracking Activate Repeat PlaybackActivate Instant Review Activate Index SearchSkip Over Unwanted SectionsBasic Recording Recording Features Select Mode Access Mode SET ScreenS.T. Picture System EN RecordingOr press Record on the recorder RecordingPlayback EN Timer Recording SetupNumber Guide Program Number SetOr Push JOG% Enter Receiving Channel Position NumberPress Push JOG %Þor Timer Programming Press SP/LP to set the tape speed To disengage the timer, press Timer againVPS Recording on PDC Programme Delivery Control recording is notAccess Showview Express Timer ProgrammingAccess Programme Start TimeTimer Mode SET VPS ModeSET Tape Speed Engage RECORDER’SPress PROG. Check Check, Cancel And Replace ProgrammesPress PROG. Check again To check more informa Tion. Each time you press PROG. CHECK, the nextReturn to Normal Screen Auto SP→LP Timer HR-J459EE onlyAuto Timer Automatic Satellite Programme Recording REC Link indicatorSET Tape Speed HR-J459EE only Before performing the following stepsTV Multi-brand Remote Control Special Features E NControl Your TV Using Additional Buttons SET TV Brand CodeEdit To Another Video Recorder Input ModeMake Connections SET Recording DECK’SSource player Edit From a Camcorder Or Another Video RecorderSET RECORDER’S Input Auto CH SET, then Perform Auto Channel SETTuner SET After Scan Completed Is displayed on the screen On the remote controlFor about 5 seconds, Channel List screenAccess Channel List Screen Access Main MenuSelect Band Input ChannelPerform Tuning Access ManualSelect Item Delete ChannelSet Stations a Switch StationsEN Tuner SET Select Channel Select Station Name CharacterPosition Select TV SystemTV Station And ID List Playback Recording Questions and Answer S E NSet the TV receiver to the Video If you are using the AV connectionSet the TV to its AV mode Recording Timer againOubleshooting Other ProblemsFront View IndexDisplay Panel EN IndexRemote Control Maximum recording time Infrared remote control unitLP J459EE only Rotary two-head helical scanMemo HR-J459/259EE