JVC HR-J6004UM, HR-J4004UM Recording Features, Engage TV Mode, Select Channel for Viewing

Page 25

Recording Features

ª £

q 2 5/8 3

1	2	3
4	5	6	TV/VCR
			TV/VCR
7	8	9
	0

OSD

C.RESET

1••

3

•• Á

¦ 7 8

4¢

25

Record One Program While Watching Another

1	ENGAGE TV MODE
	During recording...
	● If using the RF connection (☞ pg. 4), press TV/VCR.
	The VCR's VCR indicator goes out and the TV
	broadcast being recorded disappears.
	● If using the AV connection (☞ pg. 4), change the
	TV's input mode from AV to TV.

SELECT CHANNEL FOR

VIEWING

2 Use the TV’s channel selector to set the channel you want to watch.

Display Elapsed Recording Time

RESET COUNTER TO ZERO

1 Before recording starts, press C.RESET. The counter resets to zero and displays the exact elapsed time as the tape runs.

DISPLAY ELAPSED TIME ON

SCREEN

2 During recording, press OSD at any time to see the elapsed time. All indications corresponding to the current status of the VCR are displayed for 5 seconds. The counter display remains on the screen indicating the elapsed time. Press OSD again to remove the display.

●Make sure "SUPERIMPOSE" is set to "ON" (☞ pg. 17).

●The indications are not be recorded.

Image 25

Contents HR-J6004UM Hi-Fi This unit is produced to comply with Standard IEC Publ Dear CustomerContents Basic Connections Auto Tuner Set Plug & PlayDuring Plug & Play Clock Clock Setting Access Clock SETSET Date and Time Make CorrectionsAccess Tuner SET Access Main MenuAccess Band Screen TunerReturn to Normal Screen Perform Auto Channel SETAccess Manual Access AFC ScreenMake Selection Channel SET ScreenLoad a Cassette Simple PlaybackFind Program Start Point Start PlaybackSimple Recording Playback Features Adjust Manual Tracking Engage Manual Tracking ModeRE-ENGAGE Automatic Tracking Manual TrackingVideo Stabilizer Access Audio Monitor Access Function SETSelect The Soundtrack HR-J6004UM only MixSuperimpose Access SuperimposeSkip Over Unwanted Sections Access Distant CodeStart Repeat Stop RepeatMemory Activate CounterReturn to Counter Position Zero Make Connection Tape Position IndicatorNext Function Memory AV Compu Link Playback HR-J6004UM onlyAccess Function SET Screen System Screen S.T. Picture SystemPress and hold REC RecordingQuality of the tape Use, then recording Begins with the picture Level optimizedTape in use PlaybackEngage TV Mode Recording FeaturesReset Counter to Zero Select Channel for ViewingStereo And SAP Second Audio Program HR-J6004UM only Access 2ND AudioTo Record SAP Programs HR-J6004UM only To Record Stereo ProgramsEngage ITR Mode Instant Timer Recording ITRSET Recording Duration HR-J6004UM HR-J4004UMOn-Screen Timer Programming Engage Timer Mode Access Program SET Disengage TimerCancel a Program RE-ENGAGE TimerAuto SP/EP Timer Access Main Menu ScreenSP mode Access Auto Timer Screen Access Auto TimerAuto Timer Edit To Or From Another Edit From a Camcorder Access SpecialSET RECORDER’S Input ModeAccess AUX Input Screen Select ModeSelect Input Make sure the window side is up, Cassette gets stuck partwayWhen scanning channels, some Timer againHas not been programmed correctly Cassette is automatically Questions and Answers HR-J4004UM has only one Audio output connector HR-J4004UM has only one Audio input connectorFront Display Panel J6004UM Installing Batteries Remote Control ProvidedHow To Use Operating JVC TVsDo not block the VCR’s ventilation openings Do not place the VCRDo not place heavy objects on the VCR or remote ControlMemo EMO Memo HR-J6004UM/4004UM