JVC HR-J4004UM Edit From a Camcorder, SET RECORDER’S Input, Mode, Access Special, Function Screen

34

Edit From A

Camcorder

Recorder		Your VCR
		ª	£
		q 2 5/8	3
		To rear panel PAUSE/AV
		COMPU-LINK connector
VIDEO	AUDIO	Mini-plug cable (not supplied)
	IN
IN		(JVC camcorder only)

VIDEO

OUT

Camcorder AUDIO OUT

EDIT

Player

1 2 3

4 5 6

7 8 9

0

NUMBER "0"

CH

1•• 3 •• Á

¦ 7 8

4¢

MENU	PUSH JOG
OK

EDITING(cont.)

You can use a camcorder as the player and your VCR as the recorder.

MAKE CONNECTIONS

1 Connect an AV cable (not supplied) between the camcorder’s VIDEO OUT and AUDIO OUT connectors and your VCR’s VIDEO IN and AUDIO IN connectors.

●When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling your VCR. The Mini-plug cable is a mono 3.5 mm mini-plug to mono 3.5 mm mini-plug connector.

For HR-J6004UM owners...

●When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO IN L connec- tor on your VCR.

For HR-J4004UM owners...

●When using a Hi-Fi camcorder, connect its AUDIO OUT L connector to the AUDIO IN connector on your VCR.

LOAD A CASSETTE

Insert the cassette to be recorded on into your VCR and

2 the playback cassette into the camcorder.

SET RECORDER’S INPUT

MODE

Press NUMBER key “0” to set your VCR to AUX.

3 If you own the HR-J4004UM — step 12

ACCESS MAIN MENU

SCREEN

4 Press MENU.

ACCESS FUNCTION SET

SCREEN

Press CH5° or PUSH JOG%Þ to place the arrow next

5 to “FUNCTION SET”, then press OK.

If you’re using a JVC Master Edit Control-equipped

camcorder — step 6

If not — step 9

ACCESS SPECIAL

FUNCTION SCREEN

Press CH5° or PUSH JOG%Þ to place the arrow next

6 to “SPECIAL FUNCTION”, then press OK.