JVC HR-J670, HR-671, HR-674, HR-272EU 24 EN, Access the Showview screen, Enter the Showview number

Page 24

24 EN

TIMER RECORDING

SHOWVIEW® Timer Programming

Before performing the SHOWVIEW Timer

Programming:

●Make sure that the recorder’s built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the video channel (or AV mode).

With the SHOWVIEW system, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognize.

A Access the SHOWVIEW screen.

Press PROG.

The front display panel looks like this:

B Enter the SHOWVIEW number.

Press the NUMBER keys to enter the SHOWVIEW number of a programme you wish to record.

●If you make a mistake, press & and input the correct number.

The SHOWVIEW number you enter appears on the front display panel with only a 4-digit number:

C Access the SHOWVIEW Program screen.

Press OK, then the

SHOWVIEW Program screen appears (if you’re just starting out, “P1” appears).

The front display panel shows the programme start time. Pressing

"changes the display to the programme stop time, then the date and channel position.

IMPORTANT

Make sure the channel position number you wish to record is displayed; if not, see “SHOWVIEW® Setup” on page 47 and set the Guide Program number correctly.

●If the number you entered is invalid, “ERROR” appears on the TV screen and “Err” appears on the front display panel. Press & and input a valid SHOWVIEW number.

●If the “GUIDE PROG SET” screen appears, see “ATTENTION” on page 25.

Image 24

Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel How To Use Operating JVC TVsCheck the contents Situate the recorderConnect the recorder to TV Connect the recorder to mainsAuto Set Up Turn on the recorderSelect your country Perform Auto Set Up Select the languagePress rt to select your language code Press rt to select Auto and press OK or ePerform Preset Download 10 ENSet the video channel Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockAccess the Main Menu screen Access the Country Set screenLanguage 12 ENInstalling Satellite Controller Situate the Satellite ControllerAttach the Satellite Controller Make connectionsSetting satellite receivers brand and channel 14 ENTV Auto Power On NexTView LinkVCR Auto Standby Direct Rec Basic Playback 16 ENSlow Motion High-Speed SearchVariable Speed Search Pause during playback18 EN Manual TrackingInstant ReView Index Search Skip SearchNext Function Memory Repeat Playback20 EN Instant Timer Recording ITR Engage the ITR modeWatching Another Set the recording durationReset the counter 22 ENTape Remaining Time Set the counter displayPlayback RecordingAccess the Showview screen Access the Showview Program screenBefore performing the Showview Timer Programming 24 ENSet the VPS/PDC mode Engage the recorder’s timer modeSatellite Receiver Users Guide Program Number SetExpress Timer Programming 26 ENTo Timer-Record Weekly Or Daily Serials VPS/PDC RecordingEnter the channel position Press PR +28 EN Cancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Overlapping programmes blink on the TV screenSelect the L-2 Select mode Engage the Auto Satellite Programme Recording modeProgramme Recording 30 ENSet the recorder’s input mode Set the edit modeEdit From a Camcorder Start the camcorderSet the input mode of recording deck Another Video Recorder32 EN Start the source playerConnecting To a Satellite Receiver Satellite receiver Decoder Back of recorderSelect the input mode 34 ENConnect the decoder Set the tunerHR-J670/671/672/673/674EU only Make connectionsMode Set Access the Mode Set screenSelect the mode Select the mode settingYou can set the B.E.S.T. Biconditional Equalised Signal This feature helps you to adjust the playback pictureWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder is38 EN For ExampleAbout Ntsc Playback Access the Auto Channel Set screen Tuner Set40 EN Auto Channel SetPerform Auto Channel Set View the Confirmation screenPress OK twice 42 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a Channel44 EN Set Stations aSet Stations B TV Station And ID List Station NameAccess the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set 46 ENShowview Setup Guide Program Number SetGuide Program Number Enter the Guide Program numberAccess the Clock Set screen Clock Set48 EN Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operationTroubleshooting 50 ENRecording Other Problems 52 ENPlayback 54 EN Auto Set Up Connecting To a Satellite Receiver Delete a ChannelLanguage Manual Channel Set Manual Tracking Mode Set Timer warning display Tuner SetInternational Telephone Language Code Country CodeSee Instructions pg

Related manuals

Manual 56 pages 11.98 Kb

Manual 56 pages 18.54 Kb