EN 47
SHOWVIEW® Setup
IMPORTANT
Normally, Auto Set Up ( pg. 8), Preset Download ( pg. 10) or Auto Channel Set ( pg. 40) sets the Guide Program numbers automatically. You need to set the Guide Program numbers manually only in the following cases.
●When
OR
when you add a channel after Auto Set Up or Auto Channel Set has taken place,
●When you wish to
Turn on the TV and select the video channel (or
AV mode).
Guide Program Number Set
A Access the Main Menu screen.
Press MENU.
B Access the Initial Set screen.
Press rt to move the highlight bar (pointer) to “INITIAL SET”, then press OK or e.
C Access the Guide Program Set screen.
Press rt to move the highlight bar (pointer) to “GUIDE PROG SET”, then press OK or e.
D Enter the Guide Program number.
Press rt to enter the Guide Program number for the desired station as shown in the TV listings. Then press OK or e.
(Example) When inputting the Guide Program number 2 for ZDF.
E Enter the receiving channel position number.
Press the NUMBER key “0” to select “TV PROG” or “SAT”. Then press rt to input the number of the recorder’s channel position on which the Guide Program number’s broadcast is received by the recorder or the satellite receiver. Then press OK or e.
● To
system, you need to install an optional Satellite Controller and perform the procedure described in “Satellite Receiver Control Setting” ( pg. 13).
●Repeat steps 4 and 5 as necessary.
F Return to the normal screen.
Press MENU.
Guide Program Number
“Guide Program (GUIDE PROG) number” refers to the assigned TV station numbers, according to broadcast area, for the SHOWVIEW timer recording. The Guide Program numbers can be found in most TV listings.