JVC HR-J635EA Activate Wide Quality, Override Automatic Tracking, Adjust Tracking, Manually

12EN

PLAYBACK (cont.)

Manual Tracking

Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG. button.

6

q

QUALITY	WIDE QUALITY Indicator
WIDE

1	2	3
4	5	6
7	8	9
C.RESET	0

TV PROG.

SP/LP/EP

FF

REW

C. MEMORY

Wide Quality

Use this function to improve image contrast which tends to degrade especially with wide-screen TVs.

ACTIVATE WIDE QUALITY

1 During playback, press WIDE QUALITY on the recorder.

● The WIDE QUALITY indicator will light.

● Pressing the button again turns off the light.

● Turn on/off the light according to the type of playback picture you want.

● The setting will remain effective even though you turn on/off the recorder.

● This function is also effective with large-screen 4:3 aspect ratio TVs as well.

OVERRIDE AUTOMATIC

TRACKING

	Press SP/LP/EP (	) on the remote to engage manual
1 tracking.
	ADJUST TRACKING
	MANUALLY
2 Press TV PROG. 5 or ° to adjust tracking.
	RETURN TO AUTOMATIC
	TRACKING
	Press SP/LP/EP (	) on the remote to re-engage
3 automatic tracking.

NOTE:

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

Counter Memory

Returns to the counter reading of “0:00:00” to conveniently find a specific place on the tape automatically.

1	SET COUNTER MEMORY
	Press C. RESET during playback at a point you wish to
	locate later. The counter reads “0:00:00”. Then press C.
	MEMORY, and “M” appears on the front display panel.

	ACTIVATE COUNTER
2	MEMORY
	When you wish to return to the designated point, press
	STOP and then REW or FF.
	● The tape rewinds or fast-forwards and stops at about
	0:00:00 automatically.
	● To cancel Counter Memory, press C.MEMORY again.