JVC HR-J635EA specifications Setting Of The Colour System Select Buttons, Off-Air Recording

Page 32

32EN

INFORMATIONONMULTI-SYSTEMCOMPATIBILITY

Setting Of The Colour System Select Buttons

 

Mode

 

 

 

 

AUTO

 

 

 

 

 

COLOUR

NTSC 3.58

SYSTEM

 

 

 

 

 

NTSC 4.43

NTSCPAL*

PAL

MESECAM

*"NTSC[PAL" appears during playback only.

Use the COLOUR SYSTEM button on the recorder's front panel to select the colour system. Pressing this button changes the mode as illustrated on the left. The On-Screen display will show which mode is selected.

Mode Display

Description

 

 

AUTO

Usually set to this mode. This mode

(Colour Signal)

automatically detects PAL, NTSC, SECAM

 

or MESECAM and adjusts to the colour

 

system being recorded or played back.

 

When it does not perform properly, set the

 

colour system manually.

 

 

MANUAL

For recording, there is a choice of 4

(Colour Signal)

selectable modes; PAL/MESECAM/NTSC

 

3.58/NTSC4.43. Select the mode that

 

matches the colour signal being received.

 

For playback, there is an additional mode

 

which allows NTSC tapes to be played

 

back and viewed on PAL TVs.

 

 

NOTES:

In the AUTO mode, NTSC signals will be automatically recorded as NTSC 3.58.

In the AUTO mode, NTSC tapes will be played back as NTSC 3.58.

SECAM signals will always be recorded as MESECAM. Select the AUTO or the MESECAM mode when recording SECAM signals.

When playing back a SECAM tape, select the AUTO or the MESECAM mode. The playback picture will always be monochrome.

Off-Air Recording

The built-in multi-system tuner is capable of receiving PAL B/G and SECAM B/G broadcasts.

TV system

HR-J635EA

Recorded tape

PAL B/G

SECAM B/G

Multi-system tuner (B/G)

Recording circuit

PAL

MESECAM

PAL

MESECAM

NTSC 3.58

NTSC 4.43

NOTE:

This model does not operate in BRAZIL (PAL-M) or ARGENTINA (PAL-N).

Image 32
Contents HR-J635EA Safety Precautions Do not place the recorderCheck Contents Basic ConnectionsSituate Recorder Connect Recorder to MainsSelect Output Mode Reset Output ModeTune The TV To Your Video Recorder SET TV ChannelAccess Mode Select ENABLE/DISABLEOn-Screen Displays Turn on the RecorderAccess Channel SET Mode Select ScreenTuner Set SET Desired ChannelSelect Mode Select PositionStore Channel Return to Normal ScreenReturn to Normal Perform TuningFine-Tuning Channels Already Stored Clock Set SET TimeSET Date SET YearBasic Playback Load a CassettePoint Start PlaybackPlayback Features Activate HIGH-SPEED SearchAdjust Tracking Activate Wide QualityOverride Automatic Tracking ManuallyStop Scene Finder Activate Instant ReviewActivate Scene Finder SET A/B Code Switch RE-SUPPLY PowerActivate Repeat PlaybackBasic Recording Recording Features Stereo indicator Receiving Stereo And Bilin- gual ProgrammesTo Record Stereo And Bilin- gual Programmes Type of Broadcast On-screen Display Panel Being ReceivedRecorder power comes on automatically S.T. Picture SystemRecording Confirm B.E.S.T. StatusRecorder adjusts the playback picture quality PlaybackBased on the quality of the tape in use S.T. is active during Auto TrackingCode Setup Access Channel SET Mode Select ScreenStart Setting Input Guide Prog NumberPress OK Guide Prog Number starts blinkingCode Timer Programming Access G-CODE ScreenEngage Timer Mode Enter G-CODE NumberTimer Regular Timer Programming Enter Programme Stop TimeTimer Mode Check And Cancel ProgrammesAuto SP/LP Timer Engage RECORDER’SInput Mode Edit To Or From Another Video RecorderMake Connections SET Recording DECK’SEdit From a Camcorder SET RECORDER’S InputMode Start CamcorderAccess R.A. Edit Func Tion Random As- semble EditingPrepare for Editing Locate EDIT-IN PointLocate EDIT-OUT Point Start R.A. EditEND R.A. Edit Prepare Recording DeckAudio Dubbing Multi-Brand Remote Control Control Your TV Using Addi- tional ButtonsSET TV Brand Code TRY Operating TVSetting Of The Colour System Select Buttons Off-Air RecordingDubbed tape Tape-To-Tape EditingPlayback equipment Troubleshooting Timer again Resume recordingQuestions and Answers Index Display Panel Installing Batteries How To UseSpecifications DA-4 Double Azimuth head helical scan systemHR-J635EA