JVC HR-J635EA Tune The TV To Your Video Recorder, Select Output Mode, SET TV Channel

Page 4

4EN

INSTALLINGYOURNEWRECORDER (cont.)

Tune The TV

To Your Video

Recorder

6

q

OPERATE

Back of VCR

OUT

41

TEST

RF OUT

OFF – ON

The video recorder sends picture and sound signals via the RF connecting cable to your TV on UHF channel 37.

 

1

 

TURN ON THE RECORDER

 

 

Press OPERATE.

 

2

 

SELECT OUTPUT MODE

 

 

Set the TEST switch on the back of the recorder to ON.

 

3

 

SET TV CHANNEL

 

 

Set your TV to the video channel (UHF channel 37).

 

 

Two white bars appear on screen vertically.

 

 

● Tune the TV until the bars are as clear as they can be.

 

 

 

 

 

 

● Your TV should be set to the channel designated for

 

 

 

use with a video recorder, or to a spare channel if

 

 

 

there is not a specified video channel on your TV.

 

 

 

 

 

4

 

RESET OUTPUT MODE

 

 

Return the TEST switch to OFF.

NOTES:

●If CH37 is occupied by a local station, adjust the RF output channel adjustment screw to use another channel between CH33 and CH41 instead.

●If some interference noise is continually seen on the screen, consult your JVC dealer.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents HR-J635EA Safety Precautions Do not place the recorderCheck Contents Basic ConnectionsSituate Recorder Connect Recorder to MainsSelect Output Mode Reset Output ModeTune The TV To Your Video Recorder SET TV ChannelAccess Mode Select ENABLE/DISABLEOn-Screen Displays Turn on the RecorderAccess Channel SET Mode Select ScreenTuner Set SET Desired ChannelSelect Mode Select PositionStore Channel Return to Normal ScreenFine-Tuning Channels Already Stored Perform TuningReturn to Normal Clock Set SET TimeSET Date SET YearBasic Playback Load a CassettePoint Start PlaybackPlayback Features Activate HIGH-SPEED SearchAdjust Tracking Activate Wide QualityOverride Automatic Tracking ManuallyActivate Scene Finder Activate Instant ReviewStop Scene Finder SET A/B Code Switch RE-SUPPLY PowerActivate Repeat PlaybackBasic Recording Recording Features Stereo indicator Receiving Stereo And Bilin- gual ProgrammesTo Record Stereo And Bilin- gual Programmes Type of Broadcast On-screen Display Panel Being ReceivedRecorder power comes on automatically S.T. Picture SystemRecording Confirm B.E.S.T. StatusRecorder adjusts the playback picture quality PlaybackBased on the quality of the tape in use S.T. is active during Auto TrackingCode Setup Access Channel SET Mode Select ScreenStart Setting Input Guide Prog NumberPress OK Guide Prog Number starts blinkingCode Timer Programming Access G-CODE ScreenEngage Timer Mode Enter G-CODE NumberTimer Regular Timer Programming Enter Programme Stop TimeTimer Mode Check And Cancel ProgrammesAuto SP/LP Timer Engage RECORDER’SInput Mode Edit To Or From Another Video RecorderMake Connections SET Recording DECK’SEdit From a Camcorder SET RECORDER’S InputMode Start CamcorderAccess R.A. Edit Func Tion Random As- semble EditingPrepare for Editing Locate EDIT-IN PointLocate EDIT-OUT Point Start R.A. EditEND R.A. Edit Prepare Recording DeckAudio Dubbing Multi-Brand Remote Control Control Your TV Using Addi- tional ButtonsSET TV Brand Code TRY Operating TVSetting Of The Colour System Select Buttons Off-Air RecordingPlayback equipment Tape-To-Tape EditingDubbed tape Troubleshooting Timer again Resume recordingQuestions and Answers Index Display Panel Installing Batteries How To UseSpecifications DA-4 Double Azimuth head helical scan systemHR-J635EA
Top Page Image Contents