System Connections, Subsidiary Settings | JVC HR-J790EU specification

System Connections

NOTE:

When you select a country in Central or Eastern Europe for country setting, you cannot use decoder with this recorder.

Connecting to a satellite receiver

Connect the decoder to the satellite receiver’s connector if you have a decoder, L-1 IN/OUT connector to TV’s connector, and L-2 IN/DECODER connector to the satellite receiver’s connector. Then connect the satellite receiver and TV.

●Set “L-2 SELECT” to “A/V”. ( 13)

●To record a programme via the satellite receiver, set the input mode to “L-2” by pressing AUX and/or PR+/–.

●To receive a scrambled broadcast, descramble the signal with the satellite receiver.

●For details, refer to the instruction manual for the satellite receiver and decoder.

Connecting/Using a decoder

You can enjoy the variety of programming that is available through scrambled channels.

ASet “L-2 SELECT” to “DECODER”. ( 13)

BConnect the recorder’s L-2 IN/DECODER connector to the decoder’s 21-pin SCART connector using a 21-pin SCART cable.

CPerform the procedure as described in “When receiving a scrambled broadcast” ( 14).

Connecting/Using a stereo system

You can listen to the soundtrack through your stereo system. Connect the AUDIO OUT L and R connectors on the recorder to the AUX IN or TAPE MONITOR connectors on your stereo system’s receiver or amplifier.

●When listening to sound through the connected stereo system, turn the TV’s volume down completely.

Subsidiary Settings

Mode Set

You can change various mode settings.

●Turn on the recorder and the TV, and set your TV to its AV mode or video channel.

AAccess Main Menu screen, then Mode Set screen

Press MENU. Press rt to place the pointer next to “MODE SET”, then press OK or e.

BSelect mode

Press rt to place the pointer next to the item you want to set.

CChange setting

Press OK or e. The default setting is bold in the following table. Press MENU to return to normal screen.

B.E.S.T. — ON / OFF

When B.E.S.T. (Biconditional Equalized Signal Tracking) system is set to “ON”, the recorder checks the condition of the tape in use during playback and recording, and compensates to provide the highest-possible pictures. When B.E.S.T. works, “bESt” appears blinking on the display panel. B.E.S.T. takes place whenever you play back a tape or start recording after inserting a cassette.

NOTE:

The recorder checks the tape condition for about 7 seconds, then starts recording. To make sure you record the desired scene or programme completely, perform the following steps:

APress and hold 9, and press 7. After about 7 seconds, the recorder re-enters Record Pause mode.

BPress 4 to start recording.

PICTURE CONTROL — AUTO(NORM) / EDIT / SOFT / SHARP

This function helps you to adjust the playback picture quality according to your preference.

AUTO(NORM): Normally select this. Picture quality is adjusted automatically. When “B.E.S.T.” is “OFF”, “NORM” will appear instead of “AUTO”.

EDIT: Minimizes picture degradation during editing (recording and playback).

SOFT: Reduces image coarseness when viewing overplayed tapes containing much noise.

SHARP: Clearer, sharper-edged picture when viewing images with much flat, same-coloured surfaces such as cartoons.

NOTE:

Select “EDIT” when you are editing tapes. After you finish editing, select “AUTO”.

AUTO TIMER — ON / OFF

●When this function is set to “ON”:

The timer recording standby mode is automatically engaged when the recorder is turned off. It is temporarily canceled when the recorder is turned on. You do not have to press # to engage or disengage the timer recording standby mode.

●When this function is set to “OFF”:

Press # to engage or disengage the timer recording standby mode.

O.S.D. — ON / OFF

When this function is set to “ON”, various recorder status information (on-screen display) appears on the screen.

NOTE:

When you use the recorder as the source player for editing a tape, be sure to set this function to “OFF”. Otherwise, the recorder status information will be recorded on the edited tape.

DIRECT REC — ON / OFF

When this function is set to “ON”, you can easily start recording the programme that you are watching on your TV. Press and hold 7 and press 4 on the remote control, or press 7 on the recorder.

NOTES:

●When you use this function, be sure to use a TV offering T-V LINK, etc. and connect a fully-wired 21-pin SCART cable between the recorder and the TV.

●When “DIRECT REC” is set to “ON”, if you press any button just after pressing 7 on the recorder (or 7 and 4 on the remote control), the recorder may not function properly.

AUTO SP]LP TIMER — ON / OFF

When this function is set to “ON”, the recorder automatically switches to LP mode to allow complete recording if there is not enough tape to record the entire programme while timer-recording in SP mode.

— 12 —

HR-J790EU specifications

The JVC HR-J790EU is a prominent VHS player and recorder that embodies the technological advancements of the late 1990s, serving as a reliable choice for home entertainment enthusiasts. This device not only captures the essence of the era's video technology but also incorporates features that cater to modern consumer demands, making it a desirable option for both nostalgia and functionality.

One of the standout features of the HR-J790EU is its Super VHS playback capability. This technology enhances the resolution and overall picture quality of VHS tapes, offering viewers a clearer and more vibrant image compared to standard VHS recordings. The Super VHS format is particularly cherished by videographers and film enthusiasts, as it retains better detail and color depth, making it ideal for capturing memorable moments on tape.

The JVC HR-J790EU is equipped with several advanced recording features, including the Auto Repeat function, which allows for seamless playback of tapes without manual intervention. This is particularly useful for those who enjoy background viewing, whether it be a favorite movie or a collection of home videos. Additionally, the model features a built-in timer, enabling users to schedule recordings easily, ensuring that they never miss their favorite television programs.

Another significant aspect of the HR-J790EU is its compatibility with a variety of video formats. It supports not only standard VHS but also S-VHS and Video8 formats, making it an adaptable device for users with diverse video collections. The multi-format capability means that users can enjoy an extensive library of tapes without the need for multiple players.

Furthermore, JVC's incorporation of Dynamic Drum Technology enhances the tape head's performance by improving contact with the VHS tape, resulting in better sound quality along with improved video playback. The device also features an onboard OSD (On-Screen Display), making navigation simple and user-friendly, allowing users to easily access their settings and programming options.

The HR-J790EU is designed with connectivity in mind, featuring multiple input and output options. It includes standard RCA connectors, alongside S-Video outputs for superior video quality when connecting to compatible devices. This versatility not only brings convenience but also enhances the overall viewing experience.

In conclusion, the JVC HR-J790EU VHS player and recorder is a robust device that showcases the pinnacle of VHS technology. With its Super VHS playback, advanced recording features, multi-format compatibility, and user-friendly design, it continues to stand out as a notable option for both collectors and casual viewers. Whether for preserving cherished memories or enjoying classic films, the HR-J790EU remains a lasting testament to JVC's legacy in home video technology.