JVC HR-J790EU specifications Basic Recording, Recording Features

Playing back tape repeatedly (100 times)

— Repeat Playback

During playback, press and hold 4for more than 5 seconds. “$” on the display panel starts blinking slowly. To stop playback, press 8 on the remote control or 0 on the recorder.

NOTE:

Pressing 4, 3, 5 or 9 also stops Repeat Playback.

Recording

Accidental erasure prevention

To prevent accidental recording on a
recorded cassette, remove its record
safety tab. To record on it later, cover
the hole with adhesive tape.	Record safety tab

Locating beginning of recordings

— Index Search

Index codes are placed on the tape at the beginning of each recording when recording on this recorder.

AWhile the tape is not running, press wor

e (2 or 6 ) to start search.

B To access a recording of 2 to 9 index codes away, press w or e (2 or 6 )

repeatedly until the correct number is displayed on the screen (only if “O.S.D.” is set to “ON” ( 12)).

Basic Recording

Turn on the TV and select the video channel or AV mode.

ALoad a cassette

Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette.

●The recorder turns on, and the counter is reset, automatically.

BSelect recording channel

Press PR+/– or the number keys. Or push the JOG dial, then turn it to the left or right.

Example:

To locate the beginning of B from the current position, press w twice.

To locate the beginning of D from the current position, press e once.

●Playback begins automatically when the desired recording is located.

Current position

Index number

●You can select channel in the stop mode or recording pause mode.

CSet tape speed

Press SP/LP (p). The current setting for the tape speed appears on the display panel and the screen for about 5 seconds. Press SP/ LP (p) again to change the setting while tape speed is displayed.

DStart recording

On the recorder, press 7. Or on the remote control, while holding 7, press 4.

● If the tape reaches its end during recording, the recording stops

and “” and “$” on the display panel blink. Press 0on the

Locating beginning of timer recordings

— Instant Review

After ensuring that the recorder is turned off and that the timer mode is disengaged, press REVIEW.

●The recorder turns on, and rewinds to the index code indicating the beginning of the last timer-recorded programme, then begins playback automatically.

● You can access a programme as far as 9 index codes away from the current tape position. For example, if you have

timer-recorded 3 programmes, the

REVIEW indicator and “3” blink. To watch the first of the 3 programmes, press REVIEW three times.

●The number of recorded programmes is not displayed on the display panel after Automatic Satellite Programme Recording.

●The Instant Review function can also operate if the recorder is turned on.

Skipping unwanted portions

— Skip Search

Press 30 SEC once to 4 times during playback. Each press initiates a 30-second period of high-speed playback (up to

2 minutes). When the specified portion of the tape is skipped, normal playback resumes automatically. To return to normal playback during Skip Search, press 4.

recorder to eject the cassette or press 3 on the remote

control to rewind the tape.

● When “DIRECT REC” is set to “ON” ( 12), if you press any

button just after pressing 7 on the recorder (or 7 and 4 on the

remote control), the recorder may not function properly.

During recording

Pause recording

Press 9.

●Press 4 to resume recording.

●You can select channel in the recording pause mode.

Stop recording

Press 8 on the remote OR Press 0 on the recorder. control.

Recording Features

Recording Resume Function

If there is a power outage during recording (or Instant Timer Recording, or timer recording), the recording will resume automatically when the power is restored to the recorder. (No setting is required for this function.)

NOTE:

If a power outage exeed the recorder’s memory backup time, Recording Resume Function does not work.

Tape Remaining Time/Time Counter

Press – –:– – to display the tape remaining time and time counter on the screen. To reset the time counter, press 0000.

NOTES:

●Set “O.S.D.” to “ON” to display the indications on the screen. ( 12)

●Depending on the type of tape used, the tape remaining time may not appear right away, or is not correct. “– –:– –” may sometimes appear, or the display may blink on occasion.

—7 —