JVC HR-J790EU specifications Video Channel Set, Specifications

Video Channel Set

Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the recorder through the RF cable.

Perform the following steps only if interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area, or if you change the connection from RF connection to AV connection, or vice versa.

If you have connected the recorder to your TV via the AV connection, set the video channel to off.

If you have connected the recorder to your TV via the RF connection, set the correct video channel.

●Make sure the recorder’s power is off and there is no cassette inserted in the recorder.

A Access Video Channel Set mode

Hold down 0 on the recorder until the display panel shows the following.

B Set RF output system

The blinking number on the display indicates the RF output system of your

country. Press rt to set to “1” or “2”, then press OK. (1: B/G

2: D/K)

Major Countries	TV System
Austria, Denmark, Finland, Holland, Italy,
Norway, Spain, Switzerland, Sweden,	B/G
Germany, Egypt
China, Mongolia, Rumania, Bulgaria, Czech	D/K
Rep., Slovakia, Hungary, Poland, Russia

C Set video channel

With AV connection

Press PR – until the display panel shows “1 – –” (or “2 – –”).

● Now the video channel is set to off.

With RF connection

Press PR + or – to set the video channel to a vacant position between 22 and 69 which is not occupied by any local station in your area.

(Example) If channel 50 is available in your area, set the video channel to 50.

Then, set your TV to UHF channel 50.

●If the two vertical white bars appear

clearly on the screen as shown on the right, go to step 4.

●If the two vertical white bars do not appear clearly, re-set the video channel to another vacant position and try again.

DExit Video Channel Set mode

Press OK.

With AV connection

To view picture signals from the recorder, set your TV to its AV mode.

With RF connection

The channel on which the two vertical white bars appear clearly is your video channel. To view picture signals from the recorder, set your TV to the video channel.

Specifications

GENERAL

Power requirement	: AC 220 V – 240 Vd, 50 Hz/60 Hz
Power consumption
Power on	:	15 W
Power off	:	4.0 W
Temperature
Operating	:	5°C to 40°C
Storage	:	–20°C to 60°C
Operating position	:	Horizontal only
Dimensions (W x H x D) :		400 mm x 94 mm x 270 mm
Weight	:	3.4 kg
Format	:	VHS PAL standard
Maximum recording time
(SP)	:	240 min. with E-240 video cassette
(LP)	:	480 min. with E-240 video cassette

VIDEO/AUDIO

Signal system	: PAL-type colour signal and CCIR
		monochrome signal, 625 lines
		50 fields
Recording system	: DA4 (Double Azimuth) head helical
		scan system
Signal-to-noise ratio	:	45 dB
Horizontal resolution	:	250 lines
Frequency range
Normal audio	: 70 Hz to 10,000 Hz
Hi-Fi audio	: 20 Hz to 20,000 Hz
Input/Output	:	21-pin SCART connectors:
		IN/OUT x 1, IN/DECODER x 1
		RCA connectors:
		VIDEO IN x 1, AUDIO IN x 1,
		AUDIO OUT x 1

TUNER/TIMER

TV channel storage	:	99 positions (+AUX position)
capacity
Tuning system	:	Frequency synthesized tuner
Channel coverage
VHF	: 47 MHz – 89 MHz/
		104 MHz – 300 MHz/
		302 MHz – 470 MHz
UHF	: 470 MHz – 862 MHz
Aerial output	: UHF channels 22 – 69 (Adjustable)
Memory backup time	:	Approx. 10 min.

ACCESSORIES

Provided accessories	:	RF cable,
		Infrared remote control unit,
		“R6” battery x 2
Optional accessories	:	Satellite Controller RM-SD1

Specifications shown are for SP mode unless specified otherwise. E. & O.E. Design and specifications subject to change without notice.

— 16 —