JVC HR-J790EU specifications Initial Settings, Auto Set Up, Preset Download, Language Set

Initial Settings

After the 1 is pressed for the first time to power on the recorder, the recorder starts Auto Set Up or Preset Download.

ATTENTION:

If both Auto Channel Set and Clock Set have failed, “– –:– –” is displayed.

Make sure the cables are connected

properly. Turn off the recorder once, then turn the recorder back on again. The Country Set screen appears on the screen. Perform Auto Set Up or Preset Download again.

If you have connected the recorder to a TV offering T-V Link via a fully-wired 21-pin SCART cable and if the TV is turned on, the recorder automatically performs the Preset Download even if you perform Auto Set Up.

Before starting:

●Perform “Basic Connections” ( 3).

●Set the TV to its AV mode (with AV connection) or UHF channel 36 (with RF connection).

Auto Set Up

—Auto Channel Set/Auto Clock Set*/Auto Guide Program Number Set*

*If you select a country in Central or Eastern Europe, set the clock and Guide Program Number manually.

ATurn on recorder

Press 1. The Country Set screen appears on the screen.

● If you have connected your TV to the recorder with RF connection and the on- screen display appearing on UHF channel 36 looks distorted, perform “Video Channel Set” ( 16).

BSelect your country

Press rt to place the pointer next to your country, then press OK. The language is automatically selected for the on-screen display depending on the country you have selected. The AUTO SET/T-V LINK screen appears.

●If you select BELGIUM or SUISSE and press OK, the Language Set screen appears. Press rt to place the pointer next to the desired language, then press OK. Go to step 3.

● If you select MAGYARORSZÁG, CESKÁ REPUBLIKA, POLSKA or OTHER EASTERN EUROPE, press OK. The Clock Set screen appears. Press rt until the

desired time appears, then press OK or e. Set the date and year in the same way.

(Holding rt changes the time in 30-minute intervals, or changes the date

in 15-day intervals.) Then press MENU and go to step 3.

CPerform Auto Set Up

Press rt to place the pointer next to “AUTO SET” and press OK or e.

●If you are using the display panel, press rt to select “Auto” and press OK or e.

Preset Download

—Auto Channel Set by downloading preset data from TV/ Auto Clock Set*/Auto Guide Program Number Set*

*If you select a country in Central or Eastern Europe, set the clock and Guide Program Number manually.

ATTENTION:

You can use this function only with a TV offering T-V Link, etc.* Be sure to use a fully-wired 21-pin SCART cable.

*Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link, DATA LOGIC or NexTView Link via fully-wired 21- pin SCART cable. The degree of compatibility and available functions may differ by system.

Before starting:

Perform steps 1 – 2 of “Auto Set Up”.

APerform Preset Download

Press rt to place the pointer next to “T-V

LINK” and press OK or e.

●If you are using the display panel, press rt to select “CH – –” and press OK or e.

●Do NOT press any button during Preset Download. When Preset Download is completed, “COMPLETED” appears for about 5 seconds, then the normal screen appears.

BCheck results

Perform step 4 of “Auto Set Up”.

CSet video channel to off

Perform “Video Channel Set” ( 16).

NOTES:

●Depending on the area, the recorder cannot perform Auto Set Up or Preset Download properly.

●In the area where no TV station transmits a PDC (Programme Delivery Control) signal, the recorder can perform neither Auto Clock Set nor Auto Guide Program Number Set.

●If you have moved to a different area, perform “Video Channel Set” ( 16) (with RF connection), “Tuner Set” ( 13) and “Clock Set” ( 13) as required.

●If a new station starts broadcasting in your area, perform “Tuner Set” ( 13) and, if necessary, “Video Channel Set” ( 16).

Language Set

You can change the language setting manually as required.

		A Access Main Menu screen, then Auto
● Do NOT press any button during Auto Set Up. When the Auto
		Channel Set screen
	Set Up is completed, “SCAN COMPLETED” appears for about
	5 seconds, then the normal screen appears.	Press MENU. Press rt to place the
D Check results		pointer next to “AUTO CH SET”, then press
		e
If both Auto Channel Set and Clock Set		OK or .
		B Select your country
have been performed successfully, the
		Press rt to place the pointer next to your country, then press OK
correct current time is displayed.
Turn on the TV and select its video channel or AV mode. Then		or e.
make sure that all necessary stations have been stored in the		C Select language
recorder’s memory by using the PR button(s).		Press rt to place the pointer next to the desired language.
If Auto Channel Set has succeeded but
		● You do not have to press OK; pressing OK enters AUTO SET/T-V
Clock Set has not, “1” is displayed.		LINK screen.
A Turn on the TV and select its video		D Return to normal screen
channel or AV mode. Then make sure that all necessary stations
have been stored in the recorder’s memory by using the PR		Press MENU.
button(s).
B Perform “Clock Set” ( 13).

— 4 —