JVC HR-J249EK, HR-J745EK instruction manual Playback, Cord

Page 21

CORD

q

PAUSE

PLAY

2

1 2 3

4

5

6

7 8 9

04

PLAY

PAUSE

RECORD

3

1

21

NOTES:

The B.E.S.T. system works for both SP and LP modes only after a tape has been inserted and the Record mode is first initiated. It does not work during recording.

In the case of timer recording, the B.E.S.T. system works before recording is initiated.

Once the cassette is ejected, the B.E.S.T. data is cancelled. The next time the cassette is used for recording, B.E.S.T. is re- performed.

ATTENTION:

Since the B.E.S.T. system works before recording actually starts, there is a delay of approximately 7 seconds after RECORD and PLAY on the remote are pressed, or RECORD on the recorder is pressed. To make sure you record the desired scene or programme in its entirety, first perform the following steps:

1)Press and hold PAUSE and RECORD to engage the RECORD PAUSE mode.

The recorder then automatically checks the condition of the tape and, after approximately 7 seconds, re- enters RECORD PAUSE.

2)Press PLAY to start recording.

If you want to bypass the B.E.S.T. system and begin recording immediately, set “B.E.S.T.” to “OFF” in step 4 on page 20.

Playback

The recorder assesses the quality of the tape once you initiate playback. When watching a tape recorded with “B.E.S.T.” set to “ON”, it is recommended that you leave B.E.S.T. on during playback as well.

1

START PLAYBACK

 

Press PLAY.

 

HR-J745EK

 

 

 

 

 

 

 

HR-J249EK

 

 

 

 

 

 

 

 

 

 

The recorder adjusts the playback picture quality based on the quality of the tape in use.

B.E.S.T. is active during Auto Tracking. “BEST” appears blinking on the recorder’s display panel.

NOTES:

When watching a rental tape or one recorded on another video recorder, or when using this recorder as the player for editing, set B.E.S.T. to your preference by performing steps 2 through 5 on page 20.

"BEST" only appears at the beginning of automatic tracking. Even though it doesn't appear after that, the B.E.S.T. function is operative.

Image 21
Contents HR-J745EK Do not place the recorder Safety PrecautionsStep Quick SET UP Basic Connections Check ContentsSituate Recorder Connect Recorder to MainsBack of HR-J745EK Back of HR-J249EK With RF Connection Video Channel SetExit Video Channel SET Mode Access Video Channel SET ModeSET Video Channel With AV ConnectionPerform Auto SET UP Auto Set UpIf auto channel set has succeeded but auto clock set has not Video Plus+ Setup Make List of Stored Station Names Preset PositionsGuide Program Number Set When Using a Satellite Receiver And/Or Cable System Confirm Preset Position NumberClose Menu BackLoad a Cassette Basic PlaybackPoint Start PlaybackPlayback Features Pause During PlaybackActivate SLOW-MOTION Playback Activate HIGH-SPEED Search Adjust TrackingOverride Automatic Tracking ManuallyActivate Index Search Activate 3R PictureActivate Instant Review SET Counter MemorySpatializer Activate SpatializerHR-J745EK only Soundtrack Selection HR-J745EK onlyActivate Scene Finder Stop Scene FinderActivate Repeat Basic Recording Recording Features S.T. Picture System Access Main MenuScreen Return to NormalCord PlaybackPDC Recording Video Plus+ Timer RecordingPress OK after entering If your recorder receivesAccess Programme Regular Timer ProgrammingEnter Programme Start TimeEnter Preset Position Return to Normal ScreenPress TV PROG. + Timer Warning Check And Cancel ProgrammesRevise Programme InformationTimer Access Main Menu ScreenAuto Timer Auto SP/LP TimerEdit To Or From Another Video Recorder SET Recording DECK’S Input ModeMake Connections Start Source PlayerRecorder PlayerRecorder Player Your recorderSET RECORDER’S Input Edit From a CamcorderStart Camcorder Start RecorderConnection To Stereo System HR- J745EK only Connection To a Satellite Receiver Satellite Receiver UnitBack of HR-J745EK Pin Scart connectors Aerial terminal Turn on the Recorder ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Dispiay Press Push JOG %ÞtoRE-SUPPLY Power SET A/B Code SwitchControl Your TV Using Additional Buttons TV Multi-brand Remote ControlSET TV Brand Code TRY Operating TVSatellite Receiver Multi Brand Remote Control SET Satellite Receiver Brand CodeTRY Operating Satellite Receiver Perform Auto Channel SET Auto Channel SetProcedures Preset positions PRStations your recorder Located appear on aManual Channel Set Access ConfirmationSelect Position Input ChannelDelete Channel Select ItemClose Confirmation Select NEW PositionSelect NEW Station Switch StationsSelect Station Name Character Enter NEW CharacterFine-Tuning Channels Already Stored Perform TuningSelect Channel to FINE-TUNEStation Name TV Station And ID ListScotland TV Station Channel Number GuideClock Set Turn the Recorder onPreparation SET Clock PresetSET Date and Time SET Just ClockTroubleshooting Timer again Timer RecordingQuestions and Answers Specifications Index Rear View J745EK Display Panel J745EK Display Panel J249EK Remote Control How To Use Installing BatteriesEMO Memo Victor Company of JAPAN, Limited