JVC HR-J249EK, HR-J745EK instruction manual SET A/B Code Switch, RE-SUPPLY Power

Page 35

35

Tape Position Indicator

Receiving NICAM Stereo

The tape position indicator appears on screen when, from the Stop mode, you press FF, REW or perform an Index Search. The position of “5” in relation to “0” (beginning) or “+” (end) shows you where you are on the tape.

”O.S.D.” (pg. 34) must be set to “ON”, or the indicator will not appear.

0

Beginning

3

++ +

1:23:45 REMAIN 2:35

End

And Bilingual Programmes (HR-J745EK Only)

Your recorder is equipped with a Digital stereo sound decoder (NICAM), making reception of stereo and bilingual broadcasts possible.

When the recorder is tuned to a different station, the type of broadcast being received will be displayed on the TV screen for a few seconds.

Type of Broadcast

NOTE:

Depending on the type of tape used, there may be times when the indication is not correct.

Being Received

On-screen Display

 

 

 

Regular Monaural

(none)

NICAM Stereo

ST NICAM

NICAM Bilingual

BIL NICAM

NICAM Monaural

NICAM

Remote A/B Code Switching

The remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control’s A code control signals and another set to respond to B code control signals. The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B code signals.

1

 

REMOVE POWER SUPPLY

 

Unplug the mains power cord from the mains outlet.

2

 

SET A/B CODE SWITCH

 

Set to B.

3

 

RE-SUPPLY POWER

 

Plug the mains power cord back into the mains outlet.

4

 

TURN THE RECORDER ON

 

Press

 

 

on the remote control. The recorder will now

 

 

 

 

 

 

only respond to B code signals.

NOTE:

NOTE:

"O.S.D." must be set to "ON" or the on-screen displays will not appear (pg. 34).

To listen to a stereo programme, press AUDIO MONITOR until "L" and "R" appear on the front display panel.

To listen to a bilingual programme, press AUDIO MONITOR until either "L" or "R" appears on the front display panel (as required).

To listen to the Standard (regular monaural) audio while receiving a NICAM broadcast, press AUDIO MONITOR until "NORM" appears on the front display panel.

To Record NICAM Stereo

And Bilingual Programmes

(HR-J745EK Only)

The NICAM audio programme will be recorded on the Hi-Fi audio track, and the Standard audio programme on the normal audio track.

NOTES:

If the quality of stereo sound being received is poor, the broadcast will be received in monaural with better quality.

Before playing back a programme recorded in stereo, or a bilingual programme, refer to "Soundtrack Selection" (pg. 16).

Some TV sets may malfunction in response to the B mode. If this happens, switch back to the A mode.

Image 35
Contents HR-J745EK Do not place the recorder Safety PrecautionsStep Quick SET UP Connect Recorder to Mains Check ContentsBasic Connections Situate RecorderBack of HR-J745EK Back of HR-J249EK With RF Connection Video Channel SetWith AV Connection Access Video Channel SET ModeExit Video Channel SET Mode SET Video ChannelPerform Auto SET UP Auto Set UpIf auto channel set has succeeded but auto clock set has not Guide Program Number Set Video Plus+ SetupMake List of Stored Station Names Preset Positions Back Confirm Preset Position NumberWhen Using a Satellite Receiver And/Or Cable System Close MenuStart Playback Basic PlaybackLoad a Cassette PointActivate SLOW-MOTION Playback Playback FeaturesPause During Playback Manually Adjust TrackingActivate HIGH-SPEED Search Override Automatic TrackingSET Counter Memory Activate 3R PictureActivate Index Search Activate Instant ReviewSoundtrack Selection HR-J745EK only Activate SpatializerSpatializer HR-J745EK onlyActivate Repeat Activate Scene FinderStop Scene Finder Basic Recording Recording Features Return to Normal Access Main MenuS.T. Picture System ScreenCord PlaybackPDC Recording Video Plus+ Timer RecordingPress OK after entering If your recorder receivesStart Time Regular Timer ProgrammingAccess Programme Enter ProgrammePress TV PROG. + Enter Preset PositionReturn to Normal Screen Information Check And Cancel ProgrammesTimer Warning Revise ProgrammeAuto SP/LP Timer Access Main Menu ScreenTimer Auto TimerStart Source Player SET Recording DECK’S Input ModeEdit To Or From Another Video Recorder Make ConnectionsYour recorder PlayerRecorder Recorder PlayerStart Recorder Edit From a CamcorderSET RECORDER’S Input Start CamcorderConnection To Stereo System HR- J745EK only Back of HR-J745EK Connection To a Satellite ReceiverSatellite Receiver Unit Pin Scart connectors Aerial terminal Press Push JOG %Þto ENABLE/DISABLE ON-SCREEN DisplayTurn on the Recorder On-Screen DispiayRE-SUPPLY Power SET A/B Code SwitchTRY Operating TV TV Multi-brand Remote ControlControl Your TV Using Additional Buttons SET TV Brand CodeTRY Operating Satellite Receiver Satellite Receiver Multi Brand Remote ControlSET Satellite Receiver Brand Code Perform Auto Channel SET Auto Channel SetLocated appear on a Preset positions PRProcedures Stations your recorderInput Channel Access ConfirmationManual Channel Set Select PositionSelect NEW Position Select ItemDelete Channel Close ConfirmationEnter NEW Character Switch StationsSelect NEW Station Select Station Name CharacterFINE-TUNE Perform TuningFine-Tuning Channels Already Stored Select Channel toStation Name TV Station And ID ListScotland TV Station Channel Number GuidePreparation Clock SetTurn the Recorder on SET Just Clock PresetSET Clock SET Date and TimeTroubleshooting Timer again Timer RecordingQuestions and Answers Specifications Index Rear View J745EK Display Panel J745EK Display Panel J249EK Remote Control How To Use Installing BatteriesEMO Memo Victor Company of JAPAN, Limited