UMBER |
| 2 |
|
| 1 | 2 | 3 |
| 4 | 5 | 6 |
| 7 | 8 | 9 |
|
| 0 | 4 |
TV PROG.
TV/SAT./VCR
STOP
3
1
37
Satellite Receiver Multi-
Brand Remote Control
Your remote control can operate the basic functions of your satellite receiver set. In addition to JVC satellite receivers, other manufacturer’s satellite receivers can also be controlled by setting the appropriate switch on the remote control.
Before you start . . .
●Turn on the satellite receiver using its remote control.
●Set the remote control’s TV/SAT./VCR switch to SAT.
SET SATELLITE RECEIVER
BRAND CODE
1 | Refer to the chart below. While holding down |
|
| , |
| ||||
enter your satellite receiver’s brand code using the | ||||
NUMBER keys, then press STOP. |
|
|
|
●Some satellite receiver brands have more than one code. If the satellite receiver does not function with one code, try entering another.
●You don’t have to repeat this step until you replace your remote control’s batteries.
TRY OPERATING SATELLITE
RECEIVER
2 | Press |
|
| on the remote to turn the satellite receiver off. |
If it goes off, try other operations. | ||||
|
|
|
|
●The button, TV PROG. +/– button, NUMBER buttons on the remote can all be used to operate the satellite receiver.
●The NUMBER buttons will not work with JVC satellite receivers using code 13.
●With satellite receivers using Code 16, the button corresponds to the ENTER button of your satellite receiver’s remote control.
●To return the remote to video recorder control, set its TV/SAT./VCR switch to VCR.
IMPORTANT
Although the provided remote control unit is compatible with JVC satellite receivers, as well as many other models, it may not work with your satellite receiver, or in some instances, may have limited function capability.
SATELLITE RECEIVER BRAND | CODE |
|
|
JVC | 13, 14 |
AMSTRAD | 01, 02, 03, 04 |
SIEMENS | 05 |
GRUNDIG | 05, 06 |
KATHREIN | 05, 11, 12 |
PACE | 06, 08 |
PHILIPS | 07 |
ITT | 09 |
NOKIA | 09 |
SKYMASTER | 10 |
RFT | 10 |
MASPRO | 11 |
BT | 13 |
PANASONIC | 15 |
JERROLD | 16 |
|
|