JVC HR-J658EH, HR-J700E specifications Automatic Satellite Programme Recording, Prog REC Mode

Page 26

26ENTIMERRECORDING(cont.)

Automatic

Satellite

Programme

Recording

SP/LP

REC

LINK

 

ATTENTION

●Be sure not to turn on the satellite tuner before the programme is executed; otherwise, the recorder will start recording when the satellite tuner's power is turned on.

●If you have connected another appliance other than a satellite tuner to the AV2 IN/DECODER connector, be sure not to engage the Auto Satellite Prog Rec mode; otherwise, the recorder will start recording when the connected appliance's power is turned on.

●Auto Satellite Prog recording and timer-recording cannot

be done at the same time.

This facility allows you record automatically a satellite programme which is timer-programmed on your external satellite tuner. Connect a satellite tuner to the recorder's AV2 IN/DECODER connector and programme the timer on the satellite tuner; the recorder starts recording when the signals input from the satellite tuner to the AV2 IN/DECODER connector, and when there is no input signals the recorder stops recording and the power shuts off.

Before performing the following steps:

●Make sure the satellite tuner is connected to the recorder's AV2 IN/DECODER connector. (☞ pg. 34)

●Programme the timer on the satellite tuner.

●Insert a cassette with the safety tab in place.

SELECT AV2 SELECT MODE

1 Set "AV2 SELECT" to "AV2" (☞ pg. 31).

SET TAPE SPEED

2 Press SP/LP ( ) to set the tape speed.

ENGAGE AUTO SATELLITE

PROG REC MODE

Press and hold REC LINK for about 2 seconds. The

button lights up and the recorder turns off

3 automatically.

● To disengage the Auto Satellite Prog Rec mode, press

REC LINK. The button's light goes off.

● If the recorder's power is off, it is not possible to

engage the Auto Satellite Prog Rec mode.

NOTES:

●Auto Satellite Prog recording is not possible with the AV1 IN/OUT connector.

●For timer programming of the satellite tuner, refer to the instruction manual of the satellite tuner.

●Auto Satellite Prog recording is not possible if your satellite tuner does not have a timer.

●The button's light blinks while Auto Satellite Prog recording is in progress.

●Pressing the recorder's button while Auto Satellite Prog recording is in progress turns off the recorder's power and disengage the Auto Satellite Prog Rec mode.

●If there are more than one satellite programme you wish to record with Auto Satellite Prog Recording, it is not possible to set the different tape speed per each; the tape speed selected in step 2 will be applicable to all the programmes for Auto Satellite Prog recording.

●The B.E.S.T. system (☞ pg. 18) does not work while Auto Satellite Prog recording is in progress.

●Just Clock (☞ pg. 46) does not work when the Auto Satellite Prog Rec mode is engaged.

●Depending on the type of satellite tuner, the recorder may not record a slight portion of the beginning of the programme or may record slightly longer than the actual length of the programme.

●If you engage the Auto Satellite Prog Recording mode when the satellite tuner's power is on, the recorder will not start Auto Satellite Prog recording even though the button's light blinks. When the satellite tuner shuts off once and is turned back on again, the recorder starts recording.

●When the Auto Satellite Prog Rec mode is engaged or the recorder's power is turned off after Auto Satellite Prog recording is finished, the recorder will not enter the Timer mode even though "AUTO TIMER" is set to "ON".

●After Auto Satellite Programme recording, the number of recorded programmes will not be displayed on the front display panel for the Instant ReView function (☞ pg. 13).

●You can also record a programme from your cable system in the same way if the system has a timer.

Page 25 Page 27
Image 26
Page 25 Page 27
Contents HR-J700E HR-J658E/EH Do not place the recorder Safety PrecautionsFor Italy Situate Recorder Check ContentsBasic Connections Connect Recorder to MainsIf you are referring to the on-screen display Auto Set UpIf you are referring to the front display panel International Telephone Country CodeVideo Channel Language CodeVia an RF cable only RF connection Your TV to the Video Channel. Refer toJust Clock If both auto channel set and auto clock set have failedLanguage for the on-screen display Just Clock onLanguage On-Screen Displays Access Main Menu ScreenENABLE/DISABLE ON-SCREEN Display Return to Normal ScreenPower Save Mode Colour Colour System SetAbout Ntsc Playback Point Basic PlaybackLoad a Cassette Start PlaybackSearch Playback FeaturesPlayback Activate HIGH-SPEED SearchManually Adjust TrackingOverride Automatic Tracking Return to AutomaticDuring Playback Repeat PlaybackSoundtrack Selection Track USEBasic Recording Recording Features Type of Broadcast On-screen Display Being Received Receiving Stereo Bilingual ProgrammesTo Record Stereo And Bilingual Programmes A2 S.T. Picture System Select B.E.S.T. ModeMode SET, then press PreparationOr press Record on the recorder RecordingPlayback During B.E.S.TTimer Programming Timer Warning Satellite Tuner UsersEnter Programme Stop Express Timer ProgrammingStart Time TimeEngage RECORDER’S SET VPS/PDC ModeTimer Mode VPS/PDC RecordingCheck, Cancel And Replace Programmes Auto SP→LP Timer Auto TimerBefore performing the following steps Prog REC ModeAutomatic Satellite Programme Recording SET Remote Control Code Remote Control FunctionsRemove Power Supply RE-SUPPLY PowerOperate TV TV/VCR, TV +/- VolumeSET TV Brand Code TV Prog +Before you start Satellite Tuner Multi-Brand Remote ControlOperate Satellite Tuner Satellite Tuner Brand CodeMake Connections SET Recording DECK’S Input ModeEdit To Or From Another Video Recorder Start Source PlayerRecorder AV2 Select SettingPlayer Recorder PlayerMode Edit From a CamcorderSET RECORDER’S Input Start CamcorderConnect Decoder Connecting Using a DecoderSelect Input Mode SET TunerBack of Recorder Connection To Satellite TunerSatellite Tuner Unit Back of TV Connecting Using a Stereo System AUX in or Tape MonitorVideo Channel Set Access Video Channel SET ModeExit Video Channel SET Mode SET Video ChannelTuner Set Auto Channel SetPerform Auto Channel SET View Confirmation ScreenEnter NEW Channel Information Storing Channels ManuallyChange Station Channel Position When Receiving a Scrambled BroadcastDelete a Channel Channel SET Screen Access ManualSwitch Stations Select NEW StationTV Station And ID List Station NameSelect Channel to FINE-TUNE Perform TuningFine-Tuning Channels Already Stored Press OK twice. The Manual Channel Set screen appearsEnter Receiving Channel Position Number Showview SetupNumber Guide Program Number SetClock Set Access Initial SET ScreenAccess Clock SET Screen SET Date and TimeStart Clock Operation SET Just ClockSET Clock Data Source Channel Position Mains power cord is discon- nected No power is applied to the recorderRemote control wont function If you’re using the RF OUT connec- tionTimer Recording Questions and Answers Ä remain lit on the display panel. Is there Problem?Index EN Index Remote Control Frequency synthesized tuner Maximum recording timeIN/OUT x 1, IN/DECODER x Memo For More Information see INSTRUCTIONS/P4 Ex. Francais is selected for BelgiumInternational Telephone Language Code

HR-J658EH, HR-J658E, HR-J700E specifications

The JVC HR-J700E, HR-J658E, and HR-J658EH are notable models in JVC's range of VHS VCRs that emerged during the height of VHS technology. Each of these models comes with impressive features and characteristics, catering to varied user needs and preferences.

The JVC HR-J700E is renowned for its advanced capabilities, including a 4-head system that enhances video playback quality. This model supports SP, LP, and SLP recording modes, allowing for flexible tape management. Notable features include an Auto Tracking function that ensures optimal tape alignment, reducing distortion during playback. The HR-J700E also integrates a digital noise reduction system, improving picture quality by minimizing unwanted artifacts. The video output is complemented by a set of audio outputs, including stereo, ensuring a richer sound experience.

The HR-J658E model offers a blend of performance and user-friendliness. This device shares many of the features of the HR-J700E, including the 4-head system and multi-speed recording capabilities. It features a simpler user interface, making it suitable for users who prefer straightforward operation without sacrificing quality. Additionally, the tape counter and clock features on this device make it easier to track recordings, while its external connections allow for easy integration with modern televisions and audio systems.

Meanwhile, the HR-J658EH is an enhanced version of the HR-J658E, which comes with more advanced functionalities. This model maintains the core features of its predecessor while introducing features like a built-in tuner. This allows for direct reception of television signals, making it convenient for recording live broadcasts without additional hardware. The HR-J658EH continues to focus on user experience with its programmable timer settings, enabling users to schedule recordings ahead of time, a crucial aspect for those who wish to record their favorite shows while away.

All three models boast robust build quality, with a design that reflects the era's style while ensuring longevity. They also incorporate JVC's commitment to quality, characterizing each unit with minimal tape wear, thanks to their well-engineered mechanisms. While VHS technology has largely been replaced by digital formats, the HR-J700E, HR-J658E, and HR-J658EH remain relevant for collectors, antique enthusiasts, and users who appreciate the analog format's warmth. With their features and user-oriented designs, these VCRs continue to hold a nostalgic pull for many users worldwide.
Top Page Image Contents