EN 11
Setting clock semiautomatically
— Semiauto Clock Set
You can change the host channel/D.S.T. /time zone setting manually.
First follow steps 1 to 3 on page 10, then go to the following steps.
4 Set Auto Clock to ON
On the front panel: | CLOCK SET |
| |||
Press OK to move the | TIME | DATE YEAR | |||
highlight bar to “AUTO | |||||
1:00PM | 12/24 |
| 00 SUN | ||
CLOCK”, then press | AUTO CLOCK : ON |
| (CATV) | ||
HOST CH | : AUTO |
| |||
CH5°so that “ON” is | D.S.T. | : AUTO |
| ||
selected. | TIME ZONE | : AUTO |
| ||
PRESS (5,°), THEN (OK) |
6 | Select D.S.T. mode | |
You have three choices: | ||
| AUTO– | Select if you want to adjust your VCR’s |
|
| clock automatically by the incoming |
|
| signal from the host channel. (Auto |
|
| Daylight Saving Time*) |
| ON– | Adjustment will be made by the |
|
| clock itself. |
| OFF– | Select when Daylight Saving Time does |
|
| not apply to you. |
| On the front panel: | |
| Press OK to move the highlight bar to “D.S.T.”, then | |
| press CH5° repeatedly until the desired setting is | |
| selected. |
|
On the Remote:
PRESS (MENU) TO END
On the Remote: |
Press SHUTTLE PLUS # to move the highlight bar |
Press SHUTTLE PLUS # to move the highlight bar to “AUTO CLOCK”, then press SHUTTLE PLUS %Þ so that “ON” is selected.
Then;
To select the host channel — go to step 5. To select the D.S.T. mode — go to step 6. To select the time zone — go to step 7.
| NOTE: |
| The time set previously will be erased when “AUTO |
| CLOCK”, “HOST CH”, “D.S.T.” or “TIME ZONE” |
| setting is changed. |
5 |
|
Select host channel | |
You can either select “AUTO” or enter a PBS |
channel number.
On the front panel:
Press OK to move the highlight bar to “HOST CH”, then press CH5° repeatedly until “AUTO” or the desired PBS channel number is selected.
On the Remote:
Press SHUTTLE PLUS # to move the highlight bar to “HOST CH”, then press SHUTTLE PLUS %Þ until “AUTO” or the desired PBS channel number is selected.
NOTE:
Some PBS channels do not transmit clock setting data.
to “D.S.T.”, then press SHUTTLE PLUS %Þ |
repeatedly until the desired setting is selected. |
7 | Select time zone |
You can select the time zone automatically or |
manually.
On the front panel:
Press OK to move the highlight bar to “TIME ZONE”, then press CH5° repeatedly until “AUTO” or the desired time zone is selected. Each time you press the button, the time zone changes as follows:
= AUTO = ATLANTIC = EASTERN = CENTRAL = MOUNTAIN = PACIFIC
= ALASKA = HAWAII = (back to the beginning)
On the Remote:
Press SHUTTLE PLUS # to move the highlight bar to “TIME ZONE”, press SHUTTLE PLUS %Þ repeatedly until “AUTO” or the desired time zone is selected (see above).
NOTE:
If an incorrect clock time is displayed by the Plug & Play setting, you may be receiving the clock setting data of a PBS channel from an adjacent time zone or from an incorrect PBS channel from a cable TV system. If you selected "AUTO" for the host channel in step 5, be sure to select the correct time zone manually.
* Auto Daylight Saving Time
This function enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time.
With Auto DST activated, . . .
. . . | on the first Sunday of April at 2:00 AM, the clock is |
adjusted to 3:00 AM. | |
. . . | on the last Sunday of October at 2:00 AM, the |
clock is adjusted to 1:00 AM.
8 | Return to normal screen |
Press MENU. |
IMPORTANT
Turn off the VCR after performing Semiauto Clock Set. ”Auto” will appear on the front display panel while the clock is being set. The current clock time will appear automatically when the clock setting is complete.
11 | 00.1.31, 9:54 AM |