JVC HR-S3800U manual Make connections, Select input mode on this VCR, Set AV COMPU-LINK to OFF

Page 45

EN 45

You can use a camcorder as the playback VCR and your VCR as the recording VCR

1	Make connections
1	Connect an audio/video cable between the
	camcorder’s audio/video output connectors and
	your VCR’s audio/video input connectors.
	c When the JVC camcorder is equipped with the
	Master Edit Control, you can control the VCR
	from the camcorder. Connect the mini-plug
	cable (not supplied with this VCR) as illustrated
	to the left.
	c When using a camcorder with a monaural
	output, connect the audio output connector on
	the camcorder to the left audio input connector
	on this VCR.

2		Load a cassette
2		Insert the cassette to be recorded on into this
		VCR (for recording).
3
		Select input mode on this VCR
		Select “L-1” — when connecting the camcorder
		to the audio/video input
		connectors on the rear panel.
		Select “F-1” — when connecting the camcorder
		to the audio/video input
		connectors on the front panel.
		On the front panel:
		Press CH5°.
		On the Remote:
		Press the Number key "0 (AUX)" or CH +/Ð.
4
		Set “PICTURE CONTROL” to “EDIT”
		Follow the procedure described on pages 38 and
	39.

		If your camcorder is a JVC Master Edit Control-
		equipped type Ñ go to step 5.
		If your camcorder is NOT a JVC Master Edit
		Control-equipped type Ñ go to step 6.
5

		Set “AV COMPU-LINK” to “OFF”
		Follow the procedure described on pages 38 and
	41.

c The REMOTE PAUSE/AV COMPU-LINK connector works as the Remote Pause connector when “AV COMPU-LINK” is set to “OFF”.

6		Return to normal screen
6		Press MENU.
7
		Start playback
		Press PLAY ( 3) on the camcorder.
		NOTE:
		If the camcorder is equipped with a superimpose/OSD
	disable feature then set it to “OFF” before starting
	playback.
8
8		Start recording
		On the front panel:

Press REC ( ƒ).

On the Remote:

Press REC ( ƒ) and PLAY ( 3) at the same time.

c If you are using a Master Edit Control-equipped JVC camcorder, recording starts automatically on this VCR. (Refer to camcorder’s instruction manual.)

NOTE:

Be sure to select “AUTO” for “PICTURE CONTROL” (or “NORM” when “VIDEO CALIBRATION” is set to “OFF”) after you finish dubbing the tapes (Z pg. 38 and 39).

HR-S4800U/S3800U-EN44-53

45

00.1.31, 10:02 AM

Image 45

Contents HR-S4800U HR-S3800U TelephoneNumber Dear CustomerPower Cord Protection Power SourcesPower Lines Grounding or PolarizationDamage Requiring Service AccessoriesCleaning Replacement PartsContents Back of VCR Basic ConnectionsConnect VCR to power source Check contents Final preparation for useSituate VCR Connect VCR to TVPerform Plug & Play setup Plug & Play SettingWhat to do if Plug & Play setting failed Clock and tuner channels will be set automaticallyAccess Main Menu screen Language SettingAccess Initial Set screen Select language10 EN Clock SettingPreparations Select clock setSelect D.S.T. mode Setting clock semiautomaticallySet Auto Clock to on Select time zone12 EN Setting clock manuallyTuner Setting Access Tuner Set screenPerform Auto Channel Set Access Manual Channel Set screen Setting channels manually14 EN Manual Channel SetSituate Controller Cable Box Control SettingAttach Controller Connect cable box to VCRAccess Cable Box Set screen Access Main Menu screen on VCR16 EN Turn on cable boxEnter cable box brand Access Cable Box Brand Set screenHow to control the DBS receiver 18 ENConnect DBS receiver to VCR Access Main Menu screen on VCR Access DBS Receiver Set screenTurn on DBS receiver Select DBS receiver output channel20 EN Access DBS Receiver Brand Set screenEnter DBS Receiver’s brand If the DBS receiverÕs channel does not change asshownaboveLoad a cassette Basic Playback22 EN Basic Playback FeaturesChanging display information Checking tape positionAdjusting tracking condition Selecting monitor soundAutomatic operations after Access distant code Locating beginning of timer24 EN Locating beginningSelect recording channel Basic RecordingSet tape speed Start recording26 EN Basic Recording FeaturesSpecifying recording length Watching one program while recording anotherShowing on-screen display Select S-VHS ET modeDisplay VCR status on TV screen Exit on-screen display28 EN Special Effect PlaybackLocating particular scene Rapidly Picture Search High-Speed Picture SearchSkipping unwanted portions Viewing still pictureViewingframe still picture frame by Viewing slow motion pictureAccess VCR Plus+ screen VCR Plus+ Timer Programing30 EN Enter PlusCode numberEngage timer recording standby mode To use the VCR while it is in timer recording standby modeInput receiving channel number Check program dateChanging VCR Plus+ Setting 32 ENVCR Plus+ guide channel matching Input guide channel number Access Guide Channel Set screenTo Guide Channel To move the highlight bar arrow to Guide34 EN Express Timer ProgramingSet program stop time Set program dateTo timer-record daily Monday-Friday or weekly serials Engage timer recording standby mode36 EN Checking program settingsSelect program to modify Confirm overlapping programsOverlapping programs blink on the screen Press Shuttle Plus %Þ, then press Shuttle Plus #Change setting Useful Function Settings38 EN Select FunctionVideo Calibration Auto TimerPicture Control Superimpose40 EN Auto SP = EP TimerVideo Stabilizer Blue BackAV COMPU-LINK VHS ModeFront AUX Input 42 ENRear AUX Input Edit FunctionCannot turn on the VCR by pressing Power on Child LockChild lock function is now activated and you 44 EN Edit From CamcorderConnection Various connection for editing tapesMake connections Select input mode on this VCRSet AV COMPU-LINK to OFF Start playbackSelect input mode on recording VCR Select edit modeEdit To Or From Another 46 ENAudio Dubbing Source Select input modeSet Edit Function to A. DUB Locate start pointInsert Editing Sourcetape Editedtape 48 ENAnother VCR for playback AV Dubbing Sourcetape EditedtapePrepare tapes Activate editing modeSelect editing function you want Start editing50 EN TV Brand SettingTurn on the TV Set TV brand codeTurn on the cable box Cable Box Brand SettingEnter cable box brand code Operate cable box52 EN DBS Receiver Brand SettingTurn on the DBS receiver Enter DBS receiver brand codeSet remote control code for Remote Changing Remote Control CodeUnplug VCR Plug in VCR54 EN TroubleshootingTimer Recording 56 EN Other ProblemsCan the VCR indefinitely remain in still mode? Can the VCR indefinitely remain in the recording pausemode?What happens if the tape reaches its end during recording? Manual setting Preparation Semiauto setting Brand Installing the Controller 15 Output channelBrand Installing the Controller 18 Output channel 58 ENFront display panel Front panel60 EN Rear panelOn-screen display Remote How to use the RemoteUsablecassettes 62 ENHOW to Locate Your JVC Service Center 64 EN Limited WarrantyMemo 66 EN HR-S4800U/S3800U-EN54-68 00.1.31, 1005 AM HR-S4800U/S3800U

Related manuals

Manual 2 pages 57.65 Kb