JVC HR-5910U, HR-S5900U manual To timer-record daily Monday-Friday or weekly serials

Page 35
PROGRAM 1

8

Set tape speed

9Press SP/EP to set the tape speed.

Return to normal screen

Press PROG. or OK.

“PROGRAM COMPLETED” appears on the screen for about 5 seconds, then normal screen appears.

•If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made.

The Program Check screen appears and conflicting programs will start blinking.

You can now correct the conflicting programs. See “When programs overlap each other” on

0page 38.

Engage timer recording standby mode

Press TIMER.

The VCR turns off automatically and “‰” is displayed on the front display panel.

EN 35

NOTES:

●Even if a power failure occurs, the VCR keeps your timer programs. However, the clock time, channel settings, and other menu settings are lost.

As a result, when the power is supplied again to this VCR after the power failure, the following will take place.

1.This VCR starts the Plug & Play setting automatically to restore the clock time and channel setting.

2.If the clock time and channel setting are restored correctly, each timer program you have made will start at its start time unless its end time has elapsed.

●Programs that start after midnight must have the next day’s date.

●After timer recording is completed, the VCR turns off automatically.

●You can program the timer recording while a regular recording is in progress; the menu screens will not be recorded.

●If the tape reaches its end during timer recording, the cassette is automatically ejected.

●To timer-record cable or satellite channels, be sure to keep the cable box or DBS receiver turned on.

To timer-record daily (Monday–Friday) or weekly serials

Press DAILY (M-F)(number “8”) or WEEKLY (number “9”) anytime during steps 3through 9.

“DAILY” or “WEEKLY” appears on the Program screen.

●Pressing the button again makes the corresponding indication disappear.

To use the VCR while it is in timer recording standby mode

Press TIMER to cancel the timer recording standby mode, then press POWER to turn on the VCR.

DO NOT forget to put the VCR into timer recording standby mode again by pressing TIMER after you use the VCR; otherwise, you cannot record the broadcast you want.

●When “AUTO TIMER” ( pg. 40) is set to “ON”, the timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. You do not have to press TIMER to engage or disengage the timer recording standby mode.

ATTENTION FOR DBS RECEIVER USERS

If you are using a DBS receiver (unless “DBS

RECEIVER SET” is set to

 

START

STOP

 

8:00AM

 

=

 

9:00PM

 

“OFF”  pg. 19), the band

 

DATE

 

 

 

CH

 

 

12/24/00

 

 

 

110

 

SP

 

 

indication (TV, CATV or

 

 

 

 

 

 

 

SUN

 

 

 

DBS

 

 

 

DBS) appears under the

PRESS (+/–, SP/EP, 8=DAILY,

 

9=WEEKLY, 7=DBS), THEN (0K)

channel number

PRESS (PROG.) TO END

 

 

 

 

 

 

 

 

 

 

indication.

 

 

 

 

 

 

 

 

 

 

TV

:To timer-record a regular TV broadcast

 

received on the VCR.

 

 

 

 

 

 

 

 

 

 

CATV

:To timer-record a cable TV broadcast

 

received on the VCR, or through a cable box

 

(unless “CABLE BOX SET” is set to “OFF” 

 

pg. 16).

 

 

 

 

 

 

 

 

 

 

DBS

:To timer-record a satellite broadcast

 

received through a DBS receiver.

 

 

 

 

 

NOTE:

If “BAND” is set to “TV” on the Tuner Set screen

( pg. 13) and “CABLE BOX SET” is set to “OFF” on the Cable Box Set screen ( pg. 16), “CATV” will not be displayed on the Program screen; If “BAND” is set to “CATV” or “CABLE BOX SET” is set to “ON”, “TV” will not be displayed.

If the channel number entered requires that the band be set, “7=DBS” is displayed on the screen.

If this happens, press the Number key “7 (DBS)” to select “DBS”.

Page 34 Page 36
Image 35
Page 34 Page 36
Contents HR-S5900U/5910U HR-S3900U/3910U Address Dear CustomerGrounding or Polarization Power SourcesPower Lines Power Cord ProtectionReplacement Parts AccessoriesDamage Requiring Service CleaningContents Back of VCR Basic ConnectionsConnect VCR to TV Check contentsConnect VCR to power source Situate VCRClock and tuner channels will be set automatically Plug & Play SettingPerform Plug & Play setup What to do if Plug & Play setting failedSelect language Language SettingAccess Main Menu screen Access Initial Set screenSelect clock set Clock Setting10 EN 1PreparationsSelect host channel Setting clock semiautomaticallySelect D.S.T. mode Set Auto Clock to on12 EN Setting clock manuallyAutomatically Auto Channel Set Tuner SettingAccess Tuner Set screen Perform Auto Channel SetShuttle Plus # to Access Manual Channel Set screenAdd or skip desired channels Manual Channel SetConnect cable box to VCR Cable Box Control SettingSituate Controller Attach ControllerCable BOX SET Access Cable Box Set screenSelect cable box output channel Turn on cable boxIf the cable boxs channel does not change to Access Cable Box Brand Set screenEnter cable box brand Press OKDBS receiver Controller Your VCRsuggested Locations How to control the DBS receiver18 EN Connect DBS receiver to VCRSelect DBS receiver output channel Access Main Menu screen on VCRAccess DBS Receiver Set screen Turn on DBS receiverIf the DBS receiver’s Access DBS Receiver Brand Set screenChannel listed below for your brand, setting is complete Enter DBS Receiver’s brandStart playback BasicPlayback Load a cassetteChecking tape position Basic Playback Features22 EN Changing display informationActivate manual tracking Adjusting tracking conditionSelecting monitor sound Automatic operations afterLocating beginning Locating beginning of timerAccess distant code 24 ENStart recording Basic RecordingSelect recording channel Set tape speedWatching one program while Basic Recording Features26 EN Specifying recording lengthExit on-screen display Select S-VHS ET modeShowing on-screen display Display VCR status on TV screenRapidly Picture Search High-Speed Picture Search Special Effect Playback28 EN Locating particular sceneViewing slow motion picture Viewing still pictureSkipping unwanted portions Enter PlusCode number VCR Plus+ Timer ProgramingAccess PlusCode No. screen 30 ENCheck program date Engage timer recording standby modeTo use the VCR while it is in timer recording standby mode Input receiving channel numberVCR Plus+ guide channel matching Changing VCR Plus+32 EN SET, then press OK or Access Main Menu screen Input receiving channel numberInput guide channel number Guide Channel34 EN Express Timer ProgramingTo timer-record daily Monday-Friday or weekly serials 36 EN Access 24HR quick program displayTimer warning display 24HR Quick ProgramingChecking program settings Program Completed appears on the screen for about 38 ENConfirm overlapping programs Select program to modifySelect Function Useful Function SettingsAccess Function Set screen Change setting40 EN When this function is set to onWhen this function is set to OFF For Example By selecting either HI-FI L or HI-FI R Mode is used for recording on S-VHS tapesBy connecting other JVC’s AV Compulink components see AV Compulink connectors becomes possibleThis function is only for HR-S5900U/5910U AV Compu LinkPress REC Link Set timer program on DBS receiverEngage Satellite Auto Recording standby mode 44 ENChild Lock Various connection for editing tapes Edit From Camcorder46 EN ConnectionSet Picture Control to Edit Select input mode on this VCRMake connections Select video input terminal48 EN Edit To Or From AnotherStart audio dubbing Activate editing modeAudio Dubbing 1Locate start pointAV Dubbing Source tape Edited tape 50 ENAnother VCR for playback Insert Editing Source tape Edited tape1Locate end point Prepare tapesLocate start point Start editingSet TV brand code TV Brand Setting52 EN Turn on the TVOperate cable box Cable Box Brand SettingTurn on the cable box Enter cable box brand codeEnter DBS receiver brand code DBS Receiver Brand Setting54 EN Turn on the DBS receiverCode Remote ControlChanging 56 EN TroubleshootingTimer Recording Moisture Condensation 58 ENRecording Timer RecordingPlayback Can the VCR indefinitely remain in still mode?List of terms 60 ENSP/EP button only for HR-S3900U/3910U 12POWER button  pgREC ¶ button  pg Only for HR-S5900U/5910U 62 ENOn-screen display 7S Video OUT connector  pgRear panel1 64 EN How to use the RemoteUsable cassettes 66 EN HOW to Locate Your JVC Service CenterLimited Warranty HR-S3900U/3910U

HR-5910U, HR-S5900U specifications

The JVC HR-S5900U and HR-S5910U are part of JVC's renowned line of Super VHS (S-VHS) VCRs, known for their advanced recording capabilities and high-quality video output. These VCRs, popular in the late '90s, reflect JVC's commitment to preserving video fidelity during the transition from analog to digital formats.

One of the standout features of the HR-S5900U and HR-S5910U is their Super VHS technology, which delivers superior image resolution compared to standard VHS. The S-VHS format can record at a maximum resolution of 400 lines, allowing for clearer and more detailed video playback. This enhancement is essential for those who value high-quality home video recordings, especially for capturing special moments in family videos or archiving important events.

Both models come equipped with JVC's Dynamic Drum System, which improves tracking and reduces dropout, ensuring a more stable playback experience. This technology enhances the VCR's ability to deliver consistent picture quality, even in challenging conditions, such as when using older or worn tapes. Furthermore, the HR-S5910U model features a built-in time base corrector, which minimizes jitter and enhances overall picture stability.

In terms of compatibility, these VCRs can play both S-VHS and regular VHS tapes, providing versatility for users with diverse video collections. The HR-S5910U goes a step further by offering three playback modes, allowing users to adjust playback quality to suit their preferences or the quality of the original tape.

Another notable feature is the on-screen programming capability, simplifying the process of scheduling recordings. Users can easily set timers and select specific channels, making it a user-friendly experience for even those less familiar with high-tech devices. The inclusion of a variety of audio outputs, including stereo sound, ensures that users can enjoy enhanced audio quality to complement the superior video performance.

JVC's HR-S5900U and HR-S5910U also support various recording speeds, including SP and EP modes, allowing users to extend recording time without sacrificing much quality. Furthermore, both models exhibit robust build quality, a hallmark of JVC's design philosophy, ensuring they can withstand regular use while delivering reliable performance.

In summary, the JVC HR-S5900U and HR-S5910U are key players in the world of home video, combining advanced technology with practical features for superior playback and recording quality. Their blend of high-resolution video capabilities, user-friendly programming, and versatile compatibility make them an excellent choice for any video enthusiast looking to preserve their memories in the best possible format.
Top Page Image Contents