JVC HR-5910U, HR-S5900U manual For Example

Page 41

 

 

 

 

EN 41

 

 

* The default setting is bold in the table below.

 

 

 

 

 

 AUTO SP = EP TIMER

When this function is set to “ON”, the VCR automatically switches to EP

ON

mode to allow complete recording if there is not enough tape to record

OFF

the entire program while timer-recording in SP mode.

 

For Example . . .

 

 

 

Recording a program of 140 minutes in length onto a 120-minute tape

 

 

Approximately 110 minutes

Approximately 30 minutes

 

 

 

 

 

 

 

 

SP mode

 

EP mode

 

 

Make sure you set this function to “ON” before the timer-recording starts.

 

NOTES:

 

 

 

● If you have programed the VCR to timer-record 2 or more programs, the second

 

program and those thereafter may not fit on the tape with this function set to

 

"ON". In this case, do not use this function, but change the tape speed manually

 

during timer programing.

 

 

 

● In order to ensure that the recording fits on the tape, this function may leave a

 

slight non-recorded portion at the end of the tape.

 

● There may be some noise and sound disturbance where the tape speed switches

 

from SP to EP mode on the tape.

 

 

 

● This function is not available during ITR (Instant Timer Recording), and will not

 

work properly on the following tapes: T(ST)-30, T(ST)-60, T(ST)-90, and T(ST)-

 

120.

 

 

 

 

 

 

 

 

 VIDEO STABILIZER

When this function is set to “ON”, you can automatically correct vertical

ON

vibrations in the picture when playing back unstable recordings made on

OFF

another VCR.

 

 

 

NOTES:

 

 

 

● When you finish viewing a tape, be sure to set this function to “OFF”.

 

● Regardless of the setting, this function has no effect during recording and during

 

special effects playback.

 

 

 

● The on-screen display may jitter vertically when this function is set to “ON”.

 

● To watch recordings with close-caption, set this function to “OFF”.

 

 

 BLUE BACK

When this function is set to “ON”, the TV screen becomes all blue in the

ON

following cases:

 

 

OFF

● When receiving a channel not in use.

 

● When stopping playback.

 

 

 

NOTE:

 

 

 

When you want to receive an unstable channel with poor signals, set this function

 

to “OFF”.

 

 

 

 

 

 

 2ND AUDIO RECORD

When this function is set to “ON”;

 

 

ON

● If a SAP program is received, the SAP audio is recorded on both the

normal and Hi-Fi tracks. The main audio is not recorded.

OFF

● If a non-SAP program is received, the main audio is recorded on both

 

 

the Hi-Fi and normal tracks.

 

 

 

When this function is set to “OFF”, the SAP audio cannot be recorded.

 

 

 

 

 

 

Page 40 Page 42
Image 41
Page 40 Page 42
Contents HR-S5900U/5910U HR-S3900U/3910U Address Dear CustomerPower Lines Power SourcesPower Cord Protection Grounding or PolarizationDamage Requiring Service AccessoriesCleaning Replacement PartsContents Back of VCR Basic ConnectionsConnect VCR to power source Check contentsSituate VCR Connect VCR to TVPerform Plug & Play setup Plug & Play SettingWhat to do if Plug & Play setting failed Clock and tuner channels will be set automaticallyAccess Main Menu screen Language SettingAccess Initial Set screen Select language10 EN Clock Setting1Preparations Select clock setSelect D.S.T. mode Setting clock semiautomaticallySet Auto Clock to on Select host channel12 EN Setting clock manuallyAccess Tuner Set screen Tuner SettingPerform Auto Channel Set Automatically Auto Channel SetAdd or skip desired channels Access Manual Channel Set screenManual Channel Set Shuttle Plus # toSituate Controller Cable Box Control SettingAttach Controller Connect cable box to VCRSelect cable box output channel Access Cable Box Set screenTurn on cable box Cable BOX SETEnter cable box brand Access Cable Box Brand Set screenPress OK If the cable boxs channel does not change to18 EN How to control the DBS receiverConnect DBS receiver to VCR DBS receiver Controller Your VCRsuggested LocationsAccess DBS Receiver Set screen Access Main Menu screen on VCRTurn on DBS receiver Select DBS receiver output channelChannel listed below for your brand, setting is complete Access DBS Receiver Brand Set screenEnter DBS Receiver’s brand If the DBS receiver’sPlayback BasicLoad a cassette Start playback22 EN Basic Playback FeaturesChanging display information Checking tape positionSelecting monitor sound Adjusting tracking conditionAutomatic operations after Activate manual trackingAccess distant code Locating beginning of timer24 EN Locating beginningSelect recording channel Basic RecordingSet tape speed Start recording26 EN Basic Recording FeaturesSpecifying recording length Watching one program whileShowing on-screen display Select S-VHS ET modeDisplay VCR status on TV screen Exit on-screen display28 EN Special Effect PlaybackLocating particular scene Rapidly Picture Search High-Speed Picture SearchViewing slow motion picture Viewing still pictureSkipping unwanted portions Access PlusCode No. screen VCR Plus+ Timer Programing30 EN Enter PlusCode numberTo use the VCR while it is in timer recording standby mode Engage timer recording standby modeInput receiving channel number Check program dateVCR Plus+ guide channel matching Changing VCR Plus+32 EN Input guide channel number Access Main Menu screen Input receiving channel numberGuide Channel SET, then press OK or34 EN Express Timer ProgramingTo timer-record daily Monday-Friday or weekly serials Timer warning display Access 24HR quick program display24HR Quick Programing 36 ENChecking program settings Confirm overlapping programs 38 ENSelect program to modify Program Completed appears on the screen for aboutAccess Function Set screen Useful Function SettingsChange setting Select Function40 EN When this function is set to onWhen this function is set to OFF For Example By connecting other JVC’s AV Compulink components see Mode is used for recording on S-VHS tapesAV Compulink connectors becomes possible By selecting either HI-FI L or HI-FI RThis function is only for HR-S5900U/5910U AV Compu LinkEngage Satellite Auto Recording standby mode Set timer program on DBS receiver44 EN Press REC LinkChild Lock 46 EN Edit From CamcorderConnection Various connection for editing tapesMake connections Select input mode on this VCRSelect video input terminal Set Picture Control to Edit48 EN Edit To Or From AnotherAudio Dubbing Activate editing mode1Locate start point Start audio dubbingAnother VCR for playback 50 ENInsert Editing Source tape Edited tape AV Dubbing Source tape Edited tapeLocate start point Prepare tapesStart editing 1Locate end point52 EN TV Brand SettingTurn on the TV Set TV brand codeTurn on the cable box Cable Box Brand SettingEnter cable box brand code Operate cable box54 EN DBS Receiver Brand SettingTurn on the DBS receiver Enter DBS receiver brand codeCode Remote ControlChanging 56 EN TroubleshootingTimer Recording Moisture Condensation 58 ENPlayback Timer RecordingCan the VCR indefinitely remain in still mode? RecordingList of terms 60 ENSP/EP button only for HR-S3900U/3910U 12POWER button  pgREC ¶ button  pg Only for HR-S5900U/5910U 62 ENOn-screen display 7S Video OUT connector  pgRear panel1 64 EN How to use the RemoteUsable cassettes 66 EN HOW to Locate Your JVC Service CenterLimited Warranty HR-S3900U/3910U

HR-5910U, HR-S5900U specifications

The JVC HR-S5900U and HR-S5910U are part of JVC's renowned line of Super VHS (S-VHS) VCRs, known for their advanced recording capabilities and high-quality video output. These VCRs, popular in the late '90s, reflect JVC's commitment to preserving video fidelity during the transition from analog to digital formats.

One of the standout features of the HR-S5900U and HR-S5910U is their Super VHS technology, which delivers superior image resolution compared to standard VHS. The S-VHS format can record at a maximum resolution of 400 lines, allowing for clearer and more detailed video playback. This enhancement is essential for those who value high-quality home video recordings, especially for capturing special moments in family videos or archiving important events.

Both models come equipped with JVC's Dynamic Drum System, which improves tracking and reduces dropout, ensuring a more stable playback experience. This technology enhances the VCR's ability to deliver consistent picture quality, even in challenging conditions, such as when using older or worn tapes. Furthermore, the HR-S5910U model features a built-in time base corrector, which minimizes jitter and enhances overall picture stability.

In terms of compatibility, these VCRs can play both S-VHS and regular VHS tapes, providing versatility for users with diverse video collections. The HR-S5910U goes a step further by offering three playback modes, allowing users to adjust playback quality to suit their preferences or the quality of the original tape.

Another notable feature is the on-screen programming capability, simplifying the process of scheduling recordings. Users can easily set timers and select specific channels, making it a user-friendly experience for even those less familiar with high-tech devices. The inclusion of a variety of audio outputs, including stereo sound, ensures that users can enjoy enhanced audio quality to complement the superior video performance.

JVC's HR-S5900U and HR-S5910U also support various recording speeds, including SP and EP modes, allowing users to extend recording time without sacrificing much quality. Furthermore, both models exhibit robust build quality, a hallmark of JVC's design philosophy, ensuring they can withstand regular use while delivering reliable performance.

In summary, the JVC HR-S5900U and HR-S5910U are key players in the world of home video, combining advanced technology with practical features for superior playback and recording quality. Their blend of high-resolution video capabilities, user-friendly programming, and versatile compatibility make them an excellent choice for any video enthusiast looking to preserve their memories in the best possible format.
Top Page Image Contents