Playback | 11 |
Playback
NTSC, PAL and MESECAM video tapes can be played back on this video cassette player. See “Setting Of The Colour System Select Buttons” on page 10 for details. Before proceeding:
●Turn on the power of the TV and video cassette player.
●Make sure that the TV is set to the video channel or that the TV’s TV/VIDEO switch is set to VIDEO (See “Setting the video channel” on page 8 for details).
12
COLOUR SP/LP | STANDBY/REC | |
SYSTEM /EP |
2
ALoad a
If the safety tab on the cassette is removed, playback will start automatically.
BPress $ to start playback.
“B.E.S.T. PICTURE SYSTEM” appears on the screen.(when B.E.S.T. is set to “ON” . (See “Mode set” pg. 9)
8Press ¤ or the remote control’s 8 to stop playback. Then press ¤ to remove the cassette.
To fast forward or rewind the tape:
8From the stop mode, press Á or 1 .
Slow motion playback
Slow motion playback is 1/6 of the normal playback speed. The sound will be cut during slow motion playback.
During playback:
APress 9 for 2 seconds.
8Press $ to return to the normal playback speed.
NOTES:
●If the picture shakes during the slow mode, use TRACKING +/– to correct the picture.
●After approx. 5 minutes, the slow mode will disengage to protect the video tape.
Still picture and frame advance
Use this feature to freeze the playback picture and to advance one frame at a time. The sound will be cut during this mode.
During playback:
APress 9.
The picture will be frozen.
BPress 9 repeatedly to advance frames.
Each time the button is pressed the still picture will advance one frame.
8Press $ to resume normal playback.
NOTES:
●If the picture shakes during the still mode, use TRACKING +/– to correct the picture.
●After the picture has been frozen for approx. 5 minutes, the still mode will disengage to protect the video tape.