12 | Playback |
Shuttle search playback
Use this feature during playback to visually locate any point on a recorded cassette. The sound will be cut during shuttle search operation.
During playback:
APress Á or 1 to engage shuttle search forward or reverse.
8Press Á to 1 again to perform high speed.
NOTE:
Each time you press Á or 1, the search speed changes between
Tracking adjustment
Automatic tracking is adjusted each time a cassette is inserted in the video cassette player, you may wish to adjust tracking manually during playback.
Manual tracking:
APress the remote control’s AUTO.
BPress the remote control’s
TRACKING + or – to adjust tracking.
8Press AUTO to return to automatic tracking.
Counter reset
APress 0000 to reset the counter.
Repeat playback
Use this feature to repeat playback of a cassette 100 times.
During playback:
APress $ for more than 5 seconds.
The Play indicator will blink slowly and playback of the cassette will repeat 100 times automatically.
BPress 8 to stop repeat playback.
Tape playback will be stopped and the repeat playback mode will be cancelled.
NOTE:
Pressing $, 1, Á or 8 also stops repeat playback.
Rewind playback or power off
When the tape has finished rewinding, the Video cassette player will playback or turn itself off.
During stop:
a- For Automatic Start Of Playback Press 1, then press $ within 2 seconds.
b- For Automatic Power Off
Press 1, then press 1 within 2 seconds.
ATTENTION:
In the search, still,
•the picture will be distorted.
•the noise bars will appear.
•there will be loss of colour.
•the picture may not appear. However, this is not malfunction.