JVC HR-S7611EU Slow Motion, Variable-Speed Search, Manual Tracking, Index Search, Skip Search

Page 17

Slow Motion

ACTIVATE SLOW-MOTION

PLAYBACK

1 During playback or still, turn the SHUTTLE ring to the right for forward slow motion, or to the left for reverse slow motion (refer to the illustration on page 16).

OR

During still picture, press and hold PAUSE for 2 seconds, then release. Press and release again to return to still picture.

OR

During still picture, press and hold @ or #. Release to return to still picture.

To resume normal playback, press PLAY.

Variable-Speed Search

ACTIVATE VARIABLE-SPEED

SEARCH

1 During playback or still, turn the SHUTTLE ring to the right for forward variable-speed search, or to the left for reverse variable-speed search (refer to the illustration on page 16).

OR

During playback, press @ or #.

●The more times you press, the faster the playback picture moves.

●To decrease speed, press the button for the opposite direction.

To resume normal playback, press PLAY.

Manual Tracking

Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG buttons.

 

 

OVERRIDE AUTOMATIC

1

 

TRACKING

Press

on the remote to engage manual tracking.

2

 

ADJUST TRACKING MANUALLY

Press TV PROG + or – to adjust tracking.

 

 

RETURN TO AUTOMATIC

3

 

TRACKING

Press

on the remote to re-engage automatic

 

tracking.

 

NOTE:

EN17

Index Search

Your recorder automatically marks

index codes at the beginning of£ 2 each recording. This function gives

you quick access to any one of 9 index codes in either direction.

NOTE:

Before starting, make sure the recorder is in the Stop mode.

ACTIVATE INDEX SEARCH

1 Press @ or # (ª or £). “ª 1” or “£ 1” is displayed on screen and search begins in the corre- sponding direction.

●To access index codes 2 through 9, press @or # repeatedly until the correct index number is displayed. Ex.: To locate the beginning of B from the current

position, press @twice.

To locate the beginning of D from the current position, press #once.

Current position

A

B

C

D E

F

–2

 

–1

1

2

3

 

 

 

%

 

%

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Index number

●When the specified index code is located, playback begins automatically.

Skip Search

 

 

 

SKIP OVER UNWANTED

 

1

 

SECTIONS

 

Press 30 SEC 1 to 4 times during playback. Each press

 

 

initiates a 30-second period of fast-motion playback.

 

 

Normal playback resumes automatically.

NOTE:

To return to normal playback during a Skip Search, press PLAY.

Next Function Memory

The Next Function Memory "tells" the recorder what to do after rewinding. Before continuing, make sure the recorder is in the Stop mode.

a– For Automatic Start Of Playback After Tape Rewind . . .

. . . press REW, then press PLAY within 2 seconds. b– For Automatic Power Off After Tape Rewind . . .

. . . press REW, then press within 2 seconds.

c– For Automatic Timer Standby After Tape Rewind . . .

. . . press REW, then press (TIMER) within 2 seconds.

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

Page 16 Page 18
Image 17
Page 16 Page 18
Contents HR-S7600EU HR-S7611EU Safety Precautions Do not place the recorder For ItalyBasic Connections Check ContentsSituate Recorder Connect Recorder to MainsBack of Recorder Video ConnectionConnect Recorder to TV If you are referring to the on-screen display Auto Set UpIf you are referring to the front display panel Language Code Perform Auto SET UPSelect Language Preset Download Language for the on-screen display If both auto channel set and auto clock set have failedJust Clock Just Clock onLanguage On-Screen Displays ENABLE/DISABLE ON-SCREEN DisplayReturn to Normal Screen 12 13Mode SET, then press Power Save ModeOK or # SAVE, then press OK or #to set to onLink Functions TV Auto Power OnNexTView Link VCR Auto Standby Direct RecMode Colour System SetAbout Ntsc Playback Press %Þ to move the highlight bar pointer toLoad a Cassette Basic PlaybackPoint Start PlaybackStill Picture/Frame-By-Frame Playback Playback FeaturesHigh-Speed Turbo Search Pause During PlaybackVariable-Speed Search Slow MotionManual Tracking Index SearchDigital TBC/NR Access Mode SETDigital 3R Repeat Playback Activate Instant ReviewInstant ReView Soundtrack SelectionBasic Recording Recording Features Locate Start Point Engage RECORD-PAUSE ModeResume Recording VHS Super VHS and VHSTo Record Stereo And Bilingual Programmes A2 Receiving Stereo Bilingual ProgrammesTo Record Nicam Stereo And Bilingual Programmes Type of BroadcastS.T. Picture System Select B.E.S.T. ModePreparation S.T., then press OK orOr press Record on the recorder RecordingPlayback Timer Programming Press SP/LP Timer WarningSatellite Tuner Users Time Express Timer ProgrammingBefore performing Express Timer Programming Timer Mode SET VPS/PDC ModeReturn to Normal Engage RECORDER’SAccess Program SCREEN/ Display Check, Cancel And Replace ProgrammesCancel or Replace a Programme Return to Timer ModeAccess Main Menu Screen Auto SP→LP TimerSelect Mode Return to Normal ScreenAccess Mode SET Screen Auto TimerAuto TIMER, then press OK or #to select eitherBefore performing the following steps Prog REC ModeAutomatic Satellite Programme Recording SET Remote Control Remote Control FunctionsRE-SUPPLY Power Remote A/B Code SwitchingControl Your TV Using Additional Buttons TV Multi-brand Remote ControlSET TV Brand Code Operate TVOperate Satellite Tuner Satellite Tuner Multi-Brand Remote ControlSET Satellite Tuner Brand Code Preparation For Editing Control SET ModeSelect Picture Picture ControlEdit To Or From Another Video Recorder Recorder Player PlayerRecorder AV2 Select Setting AV1 Select SettingSET Edit Mode SET RECORDER’S Input ModeEdit From Camcorder Make ConnectionsAudio Dubbing SET Input ModeEngage Audio Dubbing Start DubbingTuner Connection ToSimple Connections Back of TVPerfect Connections Connector ScartSatellite Tuner Unit DecoderBasic Connections Select Input Mode Connecting Using a DecoderConnect Decoder SET TunerAUX in or Tape Monitor Audio Cable Connecting Using a Stereo SystemSpeaker Television Rear ViewTuner Set Access Auto CH SETAuto Channel Set Countrys name, then press OK or #View Confirmation Screen Perform Auto Channel SETStoring Channels Manually Change Station Channel Position When Receiving a Scrambled BroadcastDelete a Channel Switch Stations Access ManualChannel SET Screen Select NEW StationTV Station And ID List Fine-Tuning Channels Already Stored Perform TuningSelect Channel to FINE-TUNEExit Video Channel SET Mode Access Video Channel SET ModeVideo Channel Set SET RF Output SystemClock Set Access Initial SETTurn the Recorder on SET Date and TimeStart Clock Operation SET Just ClockNumber Showview SetupEnter Receiving Channel Position Number Guide Program Number SetRemote control wont function No power is applied to the recorderMains power cord is discon- nected If you’re using the RF OUT connec- tionRoubleshooting Quest Ions and Answers Ä remain lit on the display panel. Is there Problem?Index Rear View 64 EN Remote Control LCD Provided accessories PAL-type colour signal and CcirMemo International Telephone Language Code Ex. Deutschland is selectedEx. Francais is selected for Belgium

HR-S7600EU, HR-S7611EU specifications

The JVC HR-S7611EU and HR-S7600EU are standout models in the world of VCRs, renowned for their reliability and impressive array of features. Designed with the vintage videophile in mind, these machines provide a glimpse into a bygone era of home entertainment while integrating advanced technology for a superior experience.

Both models offer S-VHS recording and playback capabilities, which are essential for enthusiasts seeking enhanced video quality. S-VHS tapes deliver an extended bandwidth that results in sharper pictures compared to standard VHS, making these VCRs a great choice for preserving old family videos and recording new content with clarity. The HR-S7611EU also supports S-VHS ET, which allows standard VHS tapes to be played in S-VHS mode, enhancing their quality.

One of the most notable features of the HR-S7611EU is its Time Base Correction (TBC) technology. This feature improves playback quality by reducing jitter and ensuring a stable image, which is especially beneficial when working with older tapes. Additionally, the HR-S7600EU is equipped with a Digital Noise Reduction (DNR) system, which effectively minimizes tape noise and artifacts, further enhancing video quality during playback.

Both VCRs include numerous convenient features such as programmable recording, enabling users to schedule recordings while they are away. They also feature a variety of inputs and outputs, including RCA, S-Video, and RF connections, allowing easy integration with a range of home theater setups. The on-screen programming is user-friendly, making the mastering of its features accessible, even for those who are not tech-savvy.

Another remarkable characteristic of the JVC HR-S7611EU and HR-S7600EU is their robust construction. Designed for longevity, these VCRs have a solid build that has stood the test of time. With maintenance in mind, both models also include a feature for easy cleaning of the video heads.

In summary, the JVC HR-S7611EU and HR-S7600EU are exceptional choices for those looking to enjoy and preserve their video collection in high quality. With features like S-VHS compatibility, TBC technology, and a user-friendly interface, these VCRs exemplify the best of vintage video technology combined with modern engineering. Whether you’re archiving memories or exploring the past, these VCRs deliver an unparalleled experience.
Top Page Image Contents