JVC HR-S7611EU, HR-S7600EU specifications Automatic Satellite Programme Recording, Prog REC Mode

Page 33

EN33

Automatic

Satellite

Programme

Recording

SP/LP

REC LINK

ATTENTION

●Be sure not to turn on the satellite tuner before the programme is executed; otherwise, the recorder will start recording when the satellite tuner's power is turned on.

●If you have connected another appliance other than a satellite tuner to the AV2 IN/DECODER connector, be sure not to engage the Auto Satellite Prog Rec mode; otherwise, the recorder will start recording when the connected appliance's power is turned on.

●Auto Satellite Prog recording and timer-recording cannot be done at the same time.

This facility allows you record automatically a satellite programme which is timer-programmed on your external satellite tuner. Connect a satellite tuner to the recorder's AV2 IN/DECODER connector (☞ pg. 43, 44) and programme the timer on the satellite tuner; the recorder starts recording when the signals input from the satellite tuner to the AV2 IN/DECODER connector, and when there is no input signals the recorder stops recording and the power shuts off.

Before performing the following steps:

●Make sure the satellite tuner is connected to the recorder's AV2 IN/DECODER connector. (☞ pg. 43, 44)

●Programme the timer on the satellite tuner.

●Insert a cassette with the safety tab in place.

 

1

 

SELECT AV2 SELECT MODE

 

Set "AV2 SELECT" to "AV2" (☞ pg. 40).

 

 

 

 

 

● When you select "SAT", refer to "IMPORTANT" on

 

 

page 43.

 

 

 

 

 

2

 

SET TAPE SPEED

 

Press SP/LP ( ) to set the tape speed.

 

 

 

ENGAGE AUTO SATELLITE

 

3

 

PROG REC MODE

 

Press and hold REC LINK on the recorder for about 2

 

 

seconds. The button lights up and the recorder turns off

 

 

automatically.

 

 

 

● To disengage the Auto Satellite Prog Rec mode, press

 

 

 

REC LINK. The button's light goes off.

 

 

 

● If the recorder's power is off, it is not possible to

 

 

 

engage the Auto Satellite Prog Rec mode.

NOTES:

●Auto Satellite Prog recording is possible with the AV2 IN/DECODER connector only. (☞ pg. 43, 44)

●For timer programming of the satellite tuner, refer to the instruction manual of the satellite tuner.

●Auto Satellite Prog recording is not possible if your satellite tuner does not have a timer.

●The button's light blinks while Auto Satellite Prog recording is in progress.

●Pressing the recorder's button while Auto Satellite Prog recording is in progress turns off the recorder's power and disengage the Auto Satellite Prog Rec mode.

●If there are more than one satellite programme you wish to record with Auto Satellite Prog Recording, it is not possible to set the different tape speed per each; the tape speed selected in step 2 will be applicable to all the programmes for Auto Satellite Prog recording.

●The B.E.S.T. system (☞ pg. 24) does not work while Auto Satellite Prog recording is in progress.

●Just Clock (☞ pg. 56) does not work when the Auto Satellite Prog Rec mode is engaged.

●Depending on the type of satellite tuner, the recorder may not record a slight portion of the beginning of the programme or may record slightly longer than the actual length of the programme.

●If you engage the Auto Satellite Prog Recording mode when the satellite tuner's power is on, the recorder will not start Auto Satellite Prog recording even though the button's light blinks. When the satellite tuner shuts off once and is turned back on again, the recorder starts recording.

●When the Auto Satellite Prog Rec mode is engaged or the recorder's power is turned off after Auto Satellite Prog recording is finished, the recorder will not enter the Timer mode even though "AUTO TIMER" is set to "ON".

●After Auto Satellite Programme recording, the number of recorded programmes will not be displayed on the front display panel for the Instant ReView function (☞ pg. 19).

●You can also record a programme from your cable system in the same way if the system has a timer.

●When you press and hold the recorder's REC LINK button to engage the Auto Satellite Prog Rec mode, if the button does not light but instead blinks quickly even though your satellite tuner's power is off, Auto Satellite Prog Recording will not work properly with that satellite tuner*.

If this is the case, perform "Express Timer Programming" (☞ pg. 28) to timer-record a satellite programme.

* Some satellite tuners output signals even if the power is off. Auto Satellite Prog Recording is not possible with those satellite tuners.

Page 32 Page 34
Image 33
Page 32 Page 34
Contents HR-S7600EU HR-S7611EU Safety Precautions Do not place the recorder For ItalyBasic Connections Check ContentsSituate Recorder Connect Recorder to MainsVideo Connection Connect Recorder to TVBack of Recorder Auto Set Up If you are referring to the front display panelIf you are referring to the on-screen display Perform Auto SET UP Select LanguageLanguage Code Preset Download Language for the on-screen display If both auto channel set and auto clock set have failedJust Clock Just Clock onLanguage On-Screen Displays ENABLE/DISABLE ON-SCREEN DisplayReturn to Normal Screen 12 13Mode SET, then press Power Save ModeOK or # SAVE, then press OK or #to set to onLink Functions TV Auto Power OnNexTView Link VCR Auto Standby Direct RecMode Colour System SetAbout Ntsc Playback Press %Þ to move the highlight bar pointer toLoad a Cassette Basic PlaybackPoint Start PlaybackStill Picture/Frame-By-Frame Playback Playback FeaturesHigh-Speed Turbo Search Pause During PlaybackVariable-Speed Search Slow MotionManual Tracking Index SearchAccess Mode SET Digital 3RDigital TBC/NR Repeat Playback Activate Instant ReviewInstant ReView Soundtrack SelectionBasic Recording Recording Features Locate Start Point Engage RECORD-PAUSE ModeResume Recording VHS Super VHS and VHSTo Record Stereo And Bilingual Programmes A2 Receiving Stereo Bilingual ProgrammesTo Record Nicam Stereo And Bilingual Programmes Type of BroadcastS.T. Picture System Select B.E.S.T. ModePreparation S.T., then press OK orRecording PlaybackOr press Record on the recorder Timer Programming Timer Warning Satellite Tuner UsersPress SP/LP Express Timer Programming Before performing Express Timer ProgrammingTime Timer Mode SET VPS/PDC ModeReturn to Normal Engage RECORDER’SAccess Program SCREEN/ Display Check, Cancel And Replace ProgrammesCancel or Replace a Programme Return to Timer ModeAccess Main Menu Screen Auto SP→LP TimerSelect Mode Return to Normal ScreenAccess Mode SET Screen Auto TimerAuto TIMER, then press OK or #to select eitherProg REC Mode Automatic Satellite Programme RecordingBefore performing the following steps SET Remote Control Remote Control FunctionsRE-SUPPLY Power Remote A/B Code SwitchingControl Your TV Using Additional Buttons TV Multi-brand Remote ControlSET TV Brand Code Operate TVSatellite Tuner Multi-Brand Remote Control SET Satellite Tuner Brand CodeOperate Satellite Tuner Preparation For Editing Control SET ModeSelect Picture Picture ControlEdit To Or From Another Video Recorder Player RecorderRecorder Player AV2 Select Setting AV1 Select SettingSET Edit Mode SET RECORDER’S Input ModeEdit From Camcorder Make ConnectionsAudio Dubbing SET Input ModeEngage Audio Dubbing Start DubbingTuner Connection ToSimple Connections Back of TVPerfect Connections Connector ScartSatellite Tuner Unit DecoderBasic Connections Select Input Mode Connecting Using a DecoderConnect Decoder SET TunerAUX in or Tape Monitor Audio Cable Connecting Using a Stereo SystemSpeaker Television Rear ViewTuner Set Access Auto CH SETAuto Channel Set Countrys name, then press OK or #View Confirmation Screen Perform Auto Channel SETStoring Channels Manually When Receiving a Scrambled Broadcast Delete a ChannelChange Station Channel Position Switch Stations Access ManualChannel SET Screen Select NEW StationTV Station And ID List Fine-Tuning Channels Already Stored Perform TuningSelect Channel to FINE-TUNEExit Video Channel SET Mode Access Video Channel SET ModeVideo Channel Set SET RF Output SystemClock Set Access Initial SETTurn the Recorder on SET Date and TimeStart Clock Operation SET Just ClockNumber Showview SetupEnter Receiving Channel Position Number Guide Program Number SetRemote control wont function No power is applied to the recorderMains power cord is discon- nected If you’re using the RF OUT connec- tionRoubleshooting Quest Ions and Answers Ä remain lit on the display panel. Is there Problem?Index Rear View 64 EN Remote Control LCD Provided accessories PAL-type colour signal and CcirMemo Ex. Deutschland is selected Ex. Francais is selected for BelgiumInternational Telephone Language Code

HR-S7600EU, HR-S7611EU specifications

The JVC HR-S7611EU and HR-S7600EU are standout models in the world of VCRs, renowned for their reliability and impressive array of features. Designed with the vintage videophile in mind, these machines provide a glimpse into a bygone era of home entertainment while integrating advanced technology for a superior experience.

Both models offer S-VHS recording and playback capabilities, which are essential for enthusiasts seeking enhanced video quality. S-VHS tapes deliver an extended bandwidth that results in sharper pictures compared to standard VHS, making these VCRs a great choice for preserving old family videos and recording new content with clarity. The HR-S7611EU also supports S-VHS ET, which allows standard VHS tapes to be played in S-VHS mode, enhancing their quality.

One of the most notable features of the HR-S7611EU is its Time Base Correction (TBC) technology. This feature improves playback quality by reducing jitter and ensuring a stable image, which is especially beneficial when working with older tapes. Additionally, the HR-S7600EU is equipped with a Digital Noise Reduction (DNR) system, which effectively minimizes tape noise and artifacts, further enhancing video quality during playback.

Both VCRs include numerous convenient features such as programmable recording, enabling users to schedule recordings while they are away. They also feature a variety of inputs and outputs, including RCA, S-Video, and RF connections, allowing easy integration with a range of home theater setups. The on-screen programming is user-friendly, making the mastering of its features accessible, even for those who are not tech-savvy.

Another remarkable characteristic of the JVC HR-S7611EU and HR-S7600EU is their robust construction. Designed for longevity, these VCRs have a solid build that has stood the test of time. With maintenance in mind, both models also include a feature for easy cleaning of the video heads.

In summary, the JVC HR-S7611EU and HR-S7600EU are exceptional choices for those looking to enjoy and preserve their video collection in high quality. With features like S-VHS compatibility, TBC technology, and a user-friendly interface, these VCRs exemplify the best of vintage video technology combined with modern engineering. Whether you’re archiving memories or exploring the past, these VCRs deliver an unparalleled experience.
Top Page Image Contents