JVC HR-S7611EU, HR-S7600EU specifications Recording, Playback, Or press Record on the recorder

Page 25

Recording

1

START RECORDING

Press and hold RECORD and press PLAY on the remote,

or press RECORD on the recorder.

DURING B.E.S.T.

 

 

 

B.E.S.T. COMPLETE

●The recorder spends approximately 7 seconds assessing the condition of the tape, then begins recording.

NOTES:

●The B.E.S.T. system works for both SP and LP modes only after a tape has been inserted and the Record mode is first initiated. It does not work during recording.

●The B.E.S.T. system does not work while Auto Satellite Prog recording is in progress (☞ pg. 33).

●In the case of timer recording, the B.E.S.T. system works before recording is initiated.

●Once the cassette is ejected, the B.E.S.T. data is cancelled. The next time the cassette is used for recording, B.E.S.T. is re- performed.

●Pressing the recorder's RECORD button while "BEST" is displayed does not start Instant Timer Recording (☞ pg. 21).

ATTENTION

Since the B.E.S.T. system works before recording actually starts, there is a delay of approximately 7 seconds after RECORD and PLAY on the remote are pressed, or RECORD on the recorder is pressed. To make sure you record the desired scene or programme in its entirety, first perform the following steps:

1)Press and hold PAUSE and press RECORD to engage the RECORD PAUSE mode.

●The recorder then automatically checks the condition of the tape and, after approximately 7 seconds, re- enters RECORD PAUSE.

2)Press PLAY to start recording.

●If you want to bypass the B.E.S.T. system and begin recording immediately, set “B.E.S.T.” to “OFF” in step 4 on page 24.

EN25

Playback

The recorder assesses the quality of the tape once you initiate playback.

START PLAYBACK

1 Press PLAY.

●The recorder adjusts the playback picture quality based on the quality of the tape in use.

●B.E.S.T. is active during Auto Tracking. “BEST” appears blinking on the recorder’s display panel.

NOTES:

●When watching a tape recorded with “B.E.S.T.” set to “ON”, it is recommended that you leave B.E.S.T. on during playback as well.

●When watching a rental tape or one recorded on another video recorder, or when using this recorder as the player for editing, set B.E.S.T. to your preference by performing steps 1 through 5 on page 24.

●"BEST" only appears at the beginning of automatic tracking. Even though it doesn't appear after that, the B.E.S.T. function is operative.

Page 24 Page 26
Image 25
Page 24 Page 26
Contents HR-S7600EU HR-S7611EU Safety Precautions Do not place the recorder For ItalyBasic Connections Check ContentsSituate Recorder Connect Recorder to MainsConnect Recorder to TV Video ConnectionBack of Recorder If you are referring to the front display panel Auto Set UpIf you are referring to the on-screen display Select Language Perform Auto SET UPLanguage Code Preset Download Language for the on-screen display If both auto channel set and auto clock set have failedJust Clock Just Clock onLanguage On-Screen Displays ENABLE/DISABLE ON-SCREEN DisplayReturn to Normal Screen 12 13Mode SET, then press Power Save ModeOK or # SAVE, then press OK or #to set to onLink Functions TV Auto Power OnNexTView Link VCR Auto Standby Direct RecMode Colour System SetAbout Ntsc Playback Press %Þ to move the highlight bar pointer toLoad a Cassette Basic PlaybackPoint Start PlaybackStill Picture/Frame-By-Frame Playback Playback FeaturesHigh-Speed Turbo Search Pause During PlaybackVariable-Speed Search Slow MotionManual Tracking Index SearchDigital 3R Access Mode SETDigital TBC/NR Repeat Playback Activate Instant ReviewInstant ReView Soundtrack SelectionBasic Recording Recording Features Locate Start Point Engage RECORD-PAUSE ModeResume Recording VHS Super VHS and VHSTo Record Stereo And Bilingual Programmes A2 Receiving Stereo Bilingual ProgrammesTo Record Nicam Stereo And Bilingual Programmes Type of BroadcastS.T. Picture System Select B.E.S.T. ModePreparation S.T., then press OK orPlayback RecordingOr press Record on the recorder Timer Programming Satellite Tuner Users Timer WarningPress SP/LP Before performing Express Timer Programming Express Timer ProgrammingTime Timer Mode SET VPS/PDC ModeReturn to Normal Engage RECORDER’SAccess Program SCREEN/ Display Check, Cancel And Replace ProgrammesCancel or Replace a Programme Return to Timer ModeAccess Main Menu Screen Auto SP→LP TimerSelect Mode Return to Normal ScreenAccess Mode SET Screen Auto TimerAuto TIMER, then press OK or #to select eitherAutomatic Satellite Programme Recording Prog REC ModeBefore performing the following steps SET Remote Control Remote Control FunctionsRE-SUPPLY Power Remote A/B Code SwitchingControl Your TV Using Additional Buttons TV Multi-brand Remote ControlSET TV Brand Code Operate TVSET Satellite Tuner Brand Code Satellite Tuner Multi-Brand Remote ControlOperate Satellite Tuner Preparation For Editing Control SET ModeSelect Picture Picture ControlEdit To Or From Another Video Recorder Recorder PlayerRecorder Player AV2 Select Setting AV1 Select SettingSET Edit Mode SET RECORDER’S Input ModeEdit From Camcorder Make ConnectionsAudio Dubbing SET Input ModeEngage Audio Dubbing Start DubbingTuner Connection ToSimple Connections Back of TVPerfect Connections Connector ScartSatellite Tuner Unit DecoderBasic Connections Select Input Mode Connecting Using a DecoderConnect Decoder SET TunerAUX in or Tape Monitor Audio Cable Connecting Using a Stereo SystemSpeaker Television Rear ViewTuner Set Access Auto CH SETAuto Channel Set Countrys name, then press OK or #View Confirmation Screen Perform Auto Channel SETStoring Channels Manually Delete a Channel When Receiving a Scrambled BroadcastChange Station Channel Position Switch Stations Access ManualChannel SET Screen Select NEW StationTV Station And ID List Fine-Tuning Channels Already Stored Perform TuningSelect Channel to FINE-TUNEExit Video Channel SET Mode Access Video Channel SET ModeVideo Channel Set SET RF Output SystemClock Set Access Initial SETTurn the Recorder on SET Date and TimeStart Clock Operation SET Just ClockNumber Showview SetupEnter Receiving Channel Position Number Guide Program Number SetRemote control wont function No power is applied to the recorderMains power cord is discon- nected If you’re using the RF OUT connec- tionRoubleshooting Quest Ions and Answers Ä remain lit on the display panel. Is there Problem?Index Rear View 64 EN Remote Control LCD Provided accessories PAL-type colour signal and CcirMemo Ex. Francais is selected for Belgium Ex. Deutschland is selectedInternational Telephone Language Code

HR-S7600EU, HR-S7611EU specifications

The JVC HR-S7611EU and HR-S7600EU are standout models in the world of VCRs, renowned for their reliability and impressive array of features. Designed with the vintage videophile in mind, these machines provide a glimpse into a bygone era of home entertainment while integrating advanced technology for a superior experience.

Both models offer S-VHS recording and playback capabilities, which are essential for enthusiasts seeking enhanced video quality. S-VHS tapes deliver an extended bandwidth that results in sharper pictures compared to standard VHS, making these VCRs a great choice for preserving old family videos and recording new content with clarity. The HR-S7611EU also supports S-VHS ET, which allows standard VHS tapes to be played in S-VHS mode, enhancing their quality.

One of the most notable features of the HR-S7611EU is its Time Base Correction (TBC) technology. This feature improves playback quality by reducing jitter and ensuring a stable image, which is especially beneficial when working with older tapes. Additionally, the HR-S7600EU is equipped with a Digital Noise Reduction (DNR) system, which effectively minimizes tape noise and artifacts, further enhancing video quality during playback.

Both VCRs include numerous convenient features such as programmable recording, enabling users to schedule recordings while they are away. They also feature a variety of inputs and outputs, including RCA, S-Video, and RF connections, allowing easy integration with a range of home theater setups. The on-screen programming is user-friendly, making the mastering of its features accessible, even for those who are not tech-savvy.

Another remarkable characteristic of the JVC HR-S7611EU and HR-S7600EU is their robust construction. Designed for longevity, these VCRs have a solid build that has stood the test of time. With maintenance in mind, both models also include a feature for easy cleaning of the video heads.

In summary, the JVC HR-S7611EU and HR-S7600EU are exceptional choices for those looking to enjoy and preserve their video collection in high quality. With features like S-VHS compatibility, TBC technology, and a user-friendly interface, these VCRs exemplify the best of vintage video technology combined with modern engineering. Whether you’re archiving memories or exploring the past, these VCRs deliver an unparalleled experience.
Top Page Image Contents