JVC HR-S7611EU, HR-S7600EU Video Channel Set, Access Video Channel SET Mode, SET RF Output System

Page 55

EN55

Video Channel Set

Video Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable.

IMPORTANT

Perform the following steps only if —

—interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area.

—you change the connection between your recorder and TV from RF connection to AV or S-VIDEO connection, or vice versa.

If you have connected the video recorder to your TV via both the provided RF cable and a 21-pin SCART cable (AV connection), or via the provided RF cable, an S-Video cable and an audio cable (S-VIDEO connection), since you do not need the video channel you have to set the video channel to off.

If you have connected the video recorder to your TV via the RF cable only (RF connection), you have to set the correct video channel.

Before performing the following steps, make sure the recorder's power is off and there is no cassette inserted in the recorder.

1

2

3

ACCESS VIDEO CHANNEL SET MODE

Hold down STOP (5/8) on the recorder until the display panel shows the following.

SET RF OUTPUT SYSTEM

The blinking number on the display indicates the RF output system of your country. If you have selected MAGYARORSZAG (36), CESKA REPUBLIKA (42), POLSKA (48) or OTHER EASTERN EUROPE (EE) for the country setting (pg. 6, 10), press %Þ to set to "2". For other countries, set to "1". Then press OK.

(1: B/G 2: D/K)

SET VIDEO CHANNEL

With AV Connection or S-VIDEO Connection

Press TV PROG – until the display panel shows "1OUT– –" (or "2OUT– –").

●Now the video channel is set to off.

With RF Connection

Press TV PROG + or – to set the video recorder to a vacant channel between 22 and 69 which is not occupied by any local station in your area.

(Ex.) If channel 50 is available in your area

Then set your TV to UHF channel 50.

●If the two vertical white bars appear clearly on the screen as shown to the right, go to step 4.

●If the two vertical white bars do not appear clearly, re-set the video recorder to another vacant channel and try again.

NOTES:

●If you set the video recorder to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.

●If you cannot obtain the two vertical white bars clearly with any channel between 22 and 69, consult your JVC dealer.

EXIT VIDEO CHANNEL SET MODE

4 Press OK on the remote control.

With AV Connection or S-VIDEO Connection:

To view picture signals from the video recorder, set your TV to its AV mode.

With RF Connection:

The channel on which the screen in step 3 appears clearly is your video channel.

To view picture signals from the video recorder, set your TV to the Video Channel.

Page 54 Page 56
Image 55
Page 54 Page 56
Contents HR-S7600EU HR-S7611EU Safety Precautions Do not place the recorder For ItalyConnect Recorder to Mains Check ContentsBasic Connections Situate RecorderConnect Recorder to TV Video ConnectionBack of Recorder If you are referring to the front display panel Auto Set UpIf you are referring to the on-screen display Select Language Perform Auto SET UPLanguage Code Preset Download Just Clock on If both auto channel set and auto clock set have failedLanguage for the on-screen display Just ClockLanguage 12 13 ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Displays Return to Normal ScreenSAVE, then press OK or #to set to on Power Save ModeMode SET, then press OK or #VCR Auto Standby Direct Rec TV Auto Power OnLink Functions NexTView LinkPress %Þ to move the highlight bar pointer to Colour System SetMode About Ntsc PlaybackStart Playback Basic PlaybackLoad a Cassette PointPause During Playback Playback FeaturesStill Picture/Frame-By-Frame Playback High-Speed Turbo SearchIndex Search Slow MotionVariable-Speed Search Manual TrackingDigital 3R Access Mode SETDigital TBC/NR Soundtrack Selection Activate Instant ReviewRepeat Playback Instant ReViewBasic Recording Recording Features VHS Super VHS and VHS Engage RECORD-PAUSE ModeLocate Start Point Resume RecordingType of Broadcast Receiving Stereo Bilingual ProgrammesTo Record Stereo And Bilingual Programmes A2 To Record Nicam Stereo And Bilingual ProgrammesS.T., then press OK or Select B.E.S.T. ModeS.T. Picture System PreparationPlayback RecordingOr press Record on the recorder Timer Programming Satellite Tuner Users Timer WarningPress SP/LP Before performing Express Timer Programming Express Timer ProgrammingTime Engage RECORDER’S SET VPS/PDC ModeTimer Mode Return to NormalReturn to Timer Mode Check, Cancel And Replace ProgrammesAccess Program SCREEN/ Display Cancel or Replace a ProgrammeReturn to Normal Screen Auto SP→LP TimerAccess Main Menu Screen Select ModeOK or #to select either Auto TimerAccess Mode SET Screen Auto TIMER, then pressAutomatic Satellite Programme Recording Prog REC ModeBefore performing the following steps Remote A/B Code Switching Remote Control FunctionsSET Remote Control RE-SUPPLY PowerOperate TV TV Multi-brand Remote ControlControl Your TV Using Additional Buttons SET TV Brand CodeSET Satellite Tuner Brand Code Satellite Tuner Multi-Brand Remote ControlOperate Satellite Tuner Picture Control Control SET ModePreparation For Editing Select PictureEdit To Or From Another Video Recorder Recorder PlayerRecorder Player AV2 Select Setting AV1 Select SettingMake Connections SET RECORDER’S Input ModeSET Edit Mode Edit From CamcorderStart Dubbing SET Input ModeAudio Dubbing Engage Audio DubbingBack of TV Connection ToTuner Simple ConnectionsDecoder Connector ScartPerfect Connections Satellite Tuner UnitBasic Connections SET Tuner Connecting Using a DecoderSelect Input Mode Connect DecoderRear View Connecting Using a Stereo SystemAUX in or Tape Monitor Audio Cable Speaker TelevisionCountrys name, then press OK or # Access Auto CH SETTuner Set Auto Channel SetView Confirmation Screen Perform Auto Channel SETStoring Channels Manually Delete a Channel When Receiving a Scrambled BroadcastChange Station Channel Position Select NEW Station Access ManualSwitch Stations Channel SET ScreenTV Station And ID List FINE-TUNE Perform TuningFine-Tuning Channels Already Stored Select Channel toSET RF Output System Access Video Channel SET ModeExit Video Channel SET Mode Video Channel SetSET Date and Time Access Initial SETClock Set Turn the Recorder onStart Clock Operation SET Just ClockGuide Program Number Set Showview SetupNumber Enter Receiving Channel Position NumberIf you’re using the RF OUT connec- tion No power is applied to the recorderRemote control wont function Mains power cord is discon- nectedRoubleshooting Quest Ions and Answers Ä remain lit on the display panel. Is there Problem?Index Rear View 64 EN Remote Control LCD Provided accessories PAL-type colour signal and CcirMemo Ex. Francais is selected for Belgium Ex. Deutschland is selectedInternational Telephone Language Code

HR-S7600EU, HR-S7611EU specifications

The JVC HR-S7611EU and HR-S7600EU are standout models in the world of VCRs, renowned for their reliability and impressive array of features. Designed with the vintage videophile in mind, these machines provide a glimpse into a bygone era of home entertainment while integrating advanced technology for a superior experience.

Both models offer S-VHS recording and playback capabilities, which are essential for enthusiasts seeking enhanced video quality. S-VHS tapes deliver an extended bandwidth that results in sharper pictures compared to standard VHS, making these VCRs a great choice for preserving old family videos and recording new content with clarity. The HR-S7611EU also supports S-VHS ET, which allows standard VHS tapes to be played in S-VHS mode, enhancing their quality.

One of the most notable features of the HR-S7611EU is its Time Base Correction (TBC) technology. This feature improves playback quality by reducing jitter and ensuring a stable image, which is especially beneficial when working with older tapes. Additionally, the HR-S7600EU is equipped with a Digital Noise Reduction (DNR) system, which effectively minimizes tape noise and artifacts, further enhancing video quality during playback.

Both VCRs include numerous convenient features such as programmable recording, enabling users to schedule recordings while they are away. They also feature a variety of inputs and outputs, including RCA, S-Video, and RF connections, allowing easy integration with a range of home theater setups. The on-screen programming is user-friendly, making the mastering of its features accessible, even for those who are not tech-savvy.

Another remarkable characteristic of the JVC HR-S7611EU and HR-S7600EU is their robust construction. Designed for longevity, these VCRs have a solid build that has stood the test of time. With maintenance in mind, both models also include a feature for easy cleaning of the video heads.

In summary, the JVC HR-S7611EU and HR-S7600EU are exceptional choices for those looking to enjoy and preserve their video collection in high quality. With features like S-VHS compatibility, TBC technology, and a user-friendly interface, these VCRs exemplify the best of vintage video technology combined with modern engineering. Whether you’re archiving memories or exploring the past, these VCRs deliver an unparalleled experience.
Top Page Image Contents