JVC HR-J443U instruction manual Basic Connections

Page 6

6ENINSTALLINGYOURNEWVCR

Basic Connections

Antenna or Cable

ANT. IN

(Antenna or Cable input)

 

 

 

 

Coaxial Cable

 

 

Flat Feeder

AC Power

Matching Transformer

(Not supplied)

Cord

 

 

 

Back of VCR

AC

 

Audio Cable

Outlet

(not supplied)

 

 

RF OUT

Video Cable (not supplied)

1

2

3

CHECK CONTENTS

Make sure the package contains all of the accessories listed in “SPECIFICATIONS” (☞ pg. 45).

SITUATE VCR

Place the VCR on a stable, horizontal surface.

CONNECT VCR TO TV

The connection method you use depends on the type of TV you have.

RF Connection

●To Connect To A TV With NO AV Input Terminals . . .

a– Disconnect the TV antenna from the TV.

b– Connect the TV antenna cable to the ANT. IN jack on the rear of the VCR.

c– Connect the supplied RF cable between the RF OUT jack on the rear of the VCR and the TV’s antenna terminal. Set TV on CH3 or CH4 corre- sponding to the CH3 – CH4 switch setting on the back of the VCR.

AV Connection

●To Connect To A TV With AV Input Terminals . . .

a– Connect the antenna, VCR and TV as shown in the illustration.

b– Connect an Audio/Video Cable between the AUDIO OUT and VIDEO OUT jacks on the rear of the VCR and the AV IN jacks on the TV. Set your TV in video input mode or A/V input mode. Refer to the TV Instruction Manual.

For HR-J443U Owners:

TV

RF Cable (supplied)

75 ohm terminal

Back of VCR

CH3 CH4

4

If your TV has AUDIO IN L and R connectors, connect the VCR to the L connector.

CONNECT VCR TO

POWER SOURCE

Connect the power plug to an AC outlet.

● The clock and tuner channels will automatically be

set when the antenna is connected and when the AC

is first connected to the VCR (☞ pg. 7).

(If "Auto" or "CH" is displayed on the front display

panel before the VCR is powered on, the clock and

tuner channels are being set automatically. Wait for

the time to be displayed on the front display panel

NOTES:

●The VCR channel is the channel on the TV which will display the audio and video signals from the VCR. The VCR's CH3- CH4 switch, on the back of the VCR, sets the VCR channel to CH3 or CH4.

●The CH3–CH4 switch is preset to the CH3 position.

Set to CH4 if CH3 is used for broadcasting in your area and set the channel on the TV to correspond to the VCR's CH3– CH4 switch setting.

●If RF connection to TV is used, when switching from VCR to TV mode and from TV to VCR it may be necessary to issue a CH UP and then CH DOWN on TV to obtain a good quality picture.

●Even if you are using AV cables to connect your VCR to your TV, you must also connect it using the RF cable. This will ensure that you can record one show while watching another (☞ pg. 26).

●For full identification of the VCR's rear panel, refer to the Index (REAR VIEW ☞ pg. 43).

5

before powering on the VCR.)

FINAL PREPARATION FOR USE

Power on the VCR and select the VCR channel (3 or 4) by setting the switch on the rear of the VCR as shown in the illustration.

You can now perform simple playback (☞ pg. 15) or simple recording (☞ pg. 16).

Page 5 Page 7
Image 6
Page 5 Page 7
Contents HR-J643U HR-J443U Dear Customer Do not place the VCRImportant Product Safety Instructions Product and cart combination Should be moved with care. QuickContents Basic Connections Plug & Play Plug & Play SetupInitial Settings Auto Clock Set/Auto Tuner SetLanguage Arrow at the Custom Set Screen to Override ClockPreparation Auto Clock SET bySelect Host Channel Select ModeAccess Select Screens Semi-AutoMake Corrections Select D.S.T. ModeSelect Time Zone ManualTuner Access Main MenuAccess Tuner SET SETInformation Make Selection Access Tuner SET ScreenAccess AFC Screen Store or Skip Desired ChannelFind Program Start Point Simple PlaybackLoad a Cassette Start PlaybackSimple Recording Playback Features Layback and Recording Features Engage Manual Tracking ModeAdjust Manual Tracking RE-ENGAGE Automatic TrackingVideo Stabilizer Return to Normal Access Function SETAccess Superimpose SuperimposeAccess Audio Monitor Select The Soundtrack HR-J643U OnlyMix Access Distant Code Start SearchSkip Over Unwanted Sections Activate Counter MemoryReturn to Counter Position Zero Access Main Menu Screen Access Video Calibration ScreenActive Video Calibration Recording PlaybackReset Counter to Zero Recording FeaturesEngage TV Mode Select Channel for ViewingTo Record SAP Programs HR-J643U Only Access 2ND AudioStereo And SAP Second Audio Program HR-J643U Only To Record Stereo ProgramsEN Timer Recording On-Screen Timer ProgrammingAccess Program SET InformationPress TIMER. The VCR turns off automatically Engage Timer ModePress just once to access the Auto Timer screen Plus Þ%until the item you want to change beginsRE-ENGAGE Timer Disengage TimerCancel a Program Check And Cancel ProgramsAccess Auto Timer Auto TimerSET Recording Duration Instant Timer Recording ITREngage ITR Mode Press REC on the front panelEdit To Another VCR Player SET RECORDER’S Input ModeEdit From a Camcorder Or Another VCR Another VCRTurn on the TV Special FeaturesTV Multi-Brand Remote Control SET TV Brand CodeRemote Control DBS Receiver Multi-Brand Remote ControlCable Box Multi-Brand Plug in Power Cord Unplug Vcrs PowerSET Remote Control Turn VCR Power onVCR have been incorrectly con Record safety tab removedCassette gets stuck partway NectedTimer again Resume recordingSelect a different Host Channel during EN Questions and Answers PlaybackMBR Multi-Brand Remote Code Setting IndexList Of Terms HR-J443U has only one Audio input connector Front ViewHR-J443U has only one Audio output connector Rear ViewInstalling Batteries How To UseSpecifications HOW to Locate Your JVC Service Center For Servicing Only in U.S.AWarranty Only in U.S.A Limited WarrantyHR-J643U/443U
Top Page Image Contents