JVC HR-J435EA Code Timer Programming, Access G-CODE Screen, Enter G-CODE Number, Check Input Data

18TIMERRECORDING(cont.)

G-Code Timer Programming

Before performing G-Code timer recording, be sure to read "G-Code Setup" (☞ pg. 16).

2 3

q 5/8 6

PROG.	1	DAILY2	3	WEEKLY
NUMBER	4	5	6
ADD	7	8	9
SP/LP		0		TIMER
	CANCEL			OK

Before performing the following steps:

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

ACCESS G-CODE SCREEN

Press PROG.

1					G – CODE
			[0–9] =
			[PROG./CLOCK] :MENU
2	ENTER G-CODE NUMBER
	Press the appropriate
	NUMBER keys to enter the				G – CODE
	G-Code number.
		1 2 3 4 5 6 7 8
	● If you made a mistake,
	press CANCEL and enter
	the correct G-Code		[0–9] =
	number.
	CHECK INPUT DATA
	Press OK on the remote					– P 1 –
	control. The G-Code		G–CODE
3 Programming screen						12345678
				START		STOP
	appears.	21:00				= 22:00
				WEEKLY		SP
	● If the G-Code number
				DATE		TV PROG.
	you entered is incorrect,	25. 12				29
	"ERROR" will be			:OK
	displayed on the screen.
	Press CANCEL and enter the correct G-Code number.
	SET TAPE SPEED
4 Press SP/LP.
	RETURN TO NORMAL
5	SCREEN
	Press OK.
	● Repeat steps 1–5for each additional programmes.
	ENGAGE TIMER MODE
6 Press TIMER.

To Delay The Stop Time . . .

. . . press ADD after pressing OK in step 3. Each time you press, the Stop time is delayed by 5 minutes (meaning that 5 minutes of recording time is added). You can easily compensate for anticipated programme schedule delays this way.

To Timer-Record Weekly Or Daily Serials . . .

. . . after pressing OK in step 3, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday–Friday).