JVC HR-J435EA Basic Connections, Check Contents, Situate Recorder, Connect Recorder to Mains

Page 3

INSTALLINGYOURNEWRECORDER3

Basic Connections

Aerial terminal

Back of TV

RF Cable (provided)

		TV
	AV-IN terminals	Aerial
	AV-IN terminals	Cable
		Cable
		AV Cable
		(not provided)
	Mains Power
	Cord

It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COM-

PLETED BEFORE ANY VIDEO OPERATION CAN BE PER- FORMED.

	CHECK CONTENTS
	Make sure the package contains all of the accessories
1 listed in “Specifications” (☞ pg. 30).
	SITUATE RECORDER
2 Place the recorder on a stable, horizontal surface.
	CONNECT RECORDER TO
3	TV
	The connection method you use depends on the type of
	TV you have.
	RF CONNECTION
	● To Connect To A TV With NO AV Input Terminals . . .
	a– Disconnect the TV aerial cable from the TV.
	b– Connect the TV aerial cable to the ANT. IN jack
	on the rear panel of the recorder.
	c– Connect the provided RF cable between the RF
	OUT jack on the rear panel of the recorder and the
	TV’s aerial terminal.
	After step 4, go to "Tune The TV To Your Video
	Recorder" on page 4.

AV CONNECTION

●To Connect To A TV With AV Input Terminals . . .

a– Connect the aerial, recorder and TV as per “RF

CONNECTION”.

b– Connect an optional AV cable between the AUDIO OUT and VIDEO OUT connectors on the rear panel of the recorder and the TV’s AV-IN terminals.

Mains outlet

Rear View

RF output channel adjustment screw

CONNECT RECORDER TO MAINS

4 Plug the end of the mains power cord into a mains outlet.

AUDIO OUT/ VIDEO OUT

Image 3

Contents HR-J435EA Do not place the recorder Safety PrecautionsConnect Recorder to Mains Check ContentsBasic Connections Situate RecorderSET TV Channel Select Output ModeReset Output Mode Tune The TV To Your Video RecorderOn-Screen Displays Access O.S.D. SETENABLE/DISABLE ON-SCREEN Display Close Mode Select ScreenTurn on the Recorder Access Channel SETMode Select Screen Tuner SetSelect Channel Select ModeSelect Position Store ChannelPerform Tuning Fine-Tuning Channels Already StoredReturn to Normal SET Year Clock SetSET Time SET DateStart Playback Basic PlaybackLoad a Cassette PointPlayback Features Repeat Playback Activate Instant ReviewActivate Repeat Instant ReViewActivate Intelligent SET Counter MemoryActivate Counter MemoryBasic Recording Recording Features Access Channel SET Mode Select Screen Code SetupInput Guide Prog Number Press OK Guide ProgNumber starts blinking Enter G-CODE Number Code Timer ProgrammingAccess G-CODE Screen Engage Timer ModeTimer Regular Timer Programming Enter Programme StopTime Select Programme Timer ModeTimer Engage RECORDER’SStart Source Player SET Recording DECK’S Input ModeEdit To Or From Another Video Recorder Make ConnectionsStart Recorder SET RECORDER’S Input ModeEdit From a Camcorder Start CamcorderTroubleshooting Timer again Timer RecordingQuestions and Answers Index Display Panel Installing Batteries How To UseOperating JVC TVs Specificat Ions HR-J435EA