JVC HR-J280, HR-J289EU, HR-J281 specifications Connecting To a Satellite Receiver

Page 31

SYSTEM CONNECTIONS

EN 31

Connecting To A Satellite Receiver

Connect the decoder to the satellite receiver’s connector if you have a decoder, AV1 (L-1) IN/OUT connector to TV’s connector, and AV2 (L-2) IN/DECODER connector to the satellite receiver’s connector. Then connect the satellite receiver and TV.

NOTES:

●Set “L-2 SELECT” to “A/V” ( pg. 37).

●You can use Automatic Satellite Programme Recording function ( pg. 28) with this connection.

●To record a programme via the satellite receiver, select L-2 mode by pressing AUX (NUMBER key “0”) and/or PR so that “L-2” appears on the front display panel.

●To receive a scrambled broadcast, descramble the signal with the satellite receiver.

●For details, refer to the instruction manual for the satellite receiver and decoder.

Outdoor unit

Aerial

Satellite cable

Satellite receiver

21-pin AV input connector	Aerial
(SCART)	connector
Back of TV
TV aerial cable
ANT. IN
RF OUT

Decoder

Back of recorder

Mains outlet

IMPORTANT

When you set “L-2 SELECT” to “SAT” ( pg. 37), it is possible to view a satellite broadcast with the TV set to its AV mode even if the recorder is turned off. When the recorder is in Stop mode or recording, press TV/VCR on the remote control to turn off the VCR indicator on the front display panel.

●If you turn on the recorder when the satellite receiver’s power is off, nothing appears on the TV screen. In this case, turn on the satellite receiver, or set the TV to its TV mode, or press TV/VCR on the remote control to set the recorder to the video mode.

Image 31

Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display Operating JVC TVs How To UseConnect the recorder to mains Check the contentsSituate the recorder Connect the recorder to TVBefore starting, make sure of the following Auto Set UpTurn on the recorder Select your countryOn the on-screen display Perform Auto Set UpSelect the language On the front display panelPress rt to select CH - and press OK or e Perform Preset Download10 EN Set the video channelJust Clock Language for the on-screen display12 EN Access the Main Menu screenAccess the Country Set screen LanguageDirect Rec NexTView Link TV Auto Power OnLink Functions VCR Auto Standby14 EN Basic PlaybackPause during playback Slow MotionHigh-Speed Search Variable Speed SearchManual Tracking 16 ENInstant ReView Repeat Playback Index SearchSkip Search Next Function Memory18 EN Set the recording duration Instant Timer Recording ITREngage the ITR mode Watching AnotherDisplay the counter Reset the counter20 EN Tape Remaining TimeRecording PlaybackEnter the Showview number Access the Showview screenBefore performing the Showview Timer Programming 22 ENPress VPS/PDC to select on or OFF Set the VPS/PDC modeEngage the recorder’s timer mode Press SP/LP p24 EN Express Timer ProgrammingPress PR + To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel positionDisengage the timer mode Check, cancel and change programmesCancel or change a programme Return to the timer modeConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify 28 EN Select the L-2 Select modeEngage the Auto Satellite Programme Recording mode Programme RecordingEdit From a Camcorder Start the source player Set the input mode of recording deckAnother Video Recorder 30 ENConnecting To a Satellite Receiver Set the tuner Select the input mode32 EN Connect the decoderGuide Program Number Showview System SetupAccess the Initial Set screen Guide Program Number SetSelect the mode setting Mode SetAccess the Mode Set screen Select the modeOff, and automatically disengaged when the recorder is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture When this function is set to ON, the timer isFor Example 36 ENAbout Ntsc Playback Auto Channel Set Access the Auto Channel Set screenTuner Set 38 ENView the Confirmation screen Perform Auto Channel SetPress OK twice Manual Channel Set 40 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations a 42 ENSet Stations B Station Name TV Station And ID ListClock Set Access the Clock Set screen44 EN Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data46 EN Access the Video Channel Set modeExit the Video Channel Set mode Video Channel SetPower Recording 48 ENOther Problems Playback 50 ENWatching Another Auto Channel Set Auto Set UpConnecting To a Satellite Receiver Timer warning display Tuner SetLP HR-J480EU only 480 min. with E-240 video cassette Signal systemMonochrome signal, 625 lines Memory backup time Approx min