JVC HR-J280, HR-J281 LP HR-J480EU only 480 min. with E-240 video cassette, Signal system, Fields

Page 52

EN

SPECIFICATIONS

GENERAL

Power requirement : AC 220 V – 240 Vd, 50 Hz/60 Hz Power consumption

Power on	: 14 W
Power off	: 3.4 W
Temperature
Operating	: 5°C to 40°C
Storage	: –20°C to 60°C
Operating position	: Horizontal only
Dimensions (WxHxD)
	: 360 mm x 94 mm x 278 mm
Weight	: 3.2 kg
Format	: VHS PAL standard
Maximum recording time
(SP)	: 240 min. with E-240 video cassette

(LP) [HR-J480EU only]

: 480 min. with E-240 video cassette

VIDEO/AUDIO

Signal system	: PAL-type colour signal and CCIR
	monochrome signal, 625 lines
	50 fields

Recording system

[HR-J480EU] : DA4 (Double Azimuth) head helical scan system

[HR-J280/281/289EU]

:Rotary two-head herical scan system

Signal-to-noise ratio: 45 dB

Horizontal resolution

	: 250 lines
Frequency range	: 70 Hz to 10,000 Hz
Input/Output	: 21-pin SCART connectors :
	IN/OUT x 1, IN/DECODER x 1

TUNER/TIMER

TV channel storage capacity

	: 99 positions (+AUX position)
Tuning system	: Frequency synthesized tuner
Channel coverage	: VHF 47MHz – 89MHz/
	104MHz – 300MHz/
	302MHz – 470MHz
	UHF 470MHz – 862MHz
Aerial output	: UHF channels 22 – 69 (Adjustable)

Memory backup time

: Approx. 10 min.

ACCESSORIES

Provided accessories

:RF cable,

Infrared remote control unit, “R6” battery x 2

Specifications shown are for SP mode unless otherwise specified.

E.& O.E. Design and specifications subject to change without notice.

Printed in Malaysia 0101IYV*ID*PJ

Image 52

Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display How To Use Operating JVC TVsCheck the contents Situate the recorderConnect the recorder to TV Connect the recorder to mainsAuto Set Up Turn on the recorderSelect your country Before starting, make sure of the followingPerform Auto Set Up Select the languageOn the front display panel On the on-screen displayPerform Preset Download 10 ENSet the video channel Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockAccess the Main Menu screen Access the Country Set screenLanguage 12 ENNexTView Link TV Auto Power On Link FunctionsVCR Auto Standby Direct RecBasic Playback 14 ENSlow Motion High-Speed SearchVariable Speed Search Pause during playbackManual Tracking 16 ENInstant ReView Index Search Skip SearchNext Function Memory Repeat Playback18 EN Instant Timer Recording ITR Engage the ITR modeWatching Another Set the recording durationReset the counter 20 ENTape Remaining Time Display the counterPlayback RecordingAccess the Showview screen Before performing the Showview Timer Programming22 EN Enter the Showview numberSet the VPS/PDC mode Engage the recorder’s timer modePress SP/LP p Press VPS/PDC to select on or OFFExpress Timer Programming 24 ENTo Timer-Record Weekly Or Daily Serials VPS/PDC RecordingEnter the channel position Press PR +Check, cancel and change programmes Cancel or change a programmeReturn to the timer mode Disengage the timer modeConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Select the L-2 Select mode Engage the Auto Satellite Programme Recording modeProgramme Recording 28 ENEdit From a Camcorder Set the input mode of recording deck Another Video Recorder30 EN Start the source playerConnecting To a Satellite Receiver Select the input mode 32 ENConnect the decoder Set the tunerShowview System Setup Access the Initial Set screenGuide Program Number Set Guide Program NumberMode Set Access the Mode Set screenSelect the mode Select the mode settingYou can set the B.E.S.T. Biconditional Equalised Signal This feature helps you to adjust the playback pictureWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder is36 EN For ExampleAbout Ntsc Playback Access the Auto Channel Set screen Tuner Set38 EN Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK twice 40 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a ChannelSet Stations a 42 ENSet Stations B TV Station And ID List Station NameClock Set Access the Clock Set screen44 EN Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operationAccess the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set 46 ENPower 48 EN RecordingOther Problems 50 EN PlaybackAuto Channel Set Auto Set Up Connecting To a Satellite ReceiverTimer warning display Tuner Set Watching AnotherSignal system Monochrome signal, 625 linesMemory backup time Approx min LP HR-J480EU only 480 min. with E-240 video cassette