JVC HR-J250E Override Automatic Tracking, Adjust Tracking, Manually, Activate Instant Review

10EN

EW

PLAYBACK (cont.)

Manual Tracking

PLAY	Your video recorder is equipped with automatic tracking
	control. During playback, you can override this and adjust the
	tracking manually by pressing the TV PROG buttons.

REVIEW

1

STOP

2 3

2

OVERRIDE AUTOMATIC

TRACKING

1	Press on the remote to engage manual tracking.
		ADJUST TRACKING
2		MANUALLY
	Press TV PROG + or – to adjust tracking.

4

7

LAY 1

REW

STOP

5 6

8 9

0

?

4

TV PROG

30 SEC

RETURN TO AUTOMATIC

TRACKING

Press on the remote to re-engage automatic

3 tracking.

NOTE:

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

Instant ReView

Simply by pressing a single button, the recorder power comes

3

on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the recorder is off and that the Timer mode is disengaged.

ACTIVATE INSTANT

REVIEW

1 Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.

●The front display panel tells you how many programmes have been timer-recorded. If you have, for example, 3 programmes, “REVIEW” and "3" appear and blink. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

NOTE:

Instant ReView is not possible while the recorder is in the Timer mode.