JVC HR-J250E specifications Skip Over Unwanted, Sections

Index Search
Your recorder automatically marks	£ 2
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.

NOTE:

Before starting, make sure the recorder is in the Stop mode.

ACTIVATE INDEX SEARCH

PressÞor%(ª or £). “ª 1” or “£ 1” is
displayed on screen and search begins in the corre-
1 sponding direction.
● To access index codes 2 through 9, pressÞor%
repeatedly until the correct index number is displayed.
Ex.: To locate the beginning of B from the current
position, pressÞtwice.
To locate the beginning of D from the current
position, press%once.
	Current position
	A	B		C	D	E F
	–2		–1	1	2	3
			%		%
						Index number

●When the specified index code is located, playback begins automatically.

Skip Search

	SKIP OVER UNWANTED
1	SECTIONS
	Press 30 SEC 1 to 4 times during playback. Each press
	initiates a 30-second period of fast-motion playback.
	Normal playback resumes automatically.

NOTE:

To return to normal playback during a Skip Search, press PLAY.

Next Function Memory

You can set your recorder's power to go off automatically after the tape is fully rewound. Before starting, make sure the recorder is in the Stop mode.

For Automatic Power Off After Tape Rewind . . .

. . . press REW, then press within 2 seconds.

EN11

Repeat Playback

Your video recorder can automatically play back the whole tape 50 times repeatedly.

1		START PLAYBACK
	Press PLAY.
2		ACTIVATE REPEAT PLAYBACK
	Press PLAY and hold for over 5 seconds, then release.
		● The Play indicator ( ) on the display panel blinks
		slowly.
		● The tape plays 50 times automatically, and then
		stops.
3		STOP PLAYBACK
	Press STOP at any time to stop playback.

NOTE:

Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.