JVC HR-J250E specifications Safety Precautions, Do not place the recorder

Page 2

2EN

SAFETY FIRST

Safety Precautions

The rating plate and the safety caution are on the rear of the unit.

WARNING: DANGEROUS VOLTAGE INSIDE

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION

When you are not using the recorder for a long period of time, it is recommended that you disconnect the power cord from the mains outlet.

Dangerous voltage inside. Refer internal servicing to qualified service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial.

WARNING

There are two different types of SECAM colour systems: SECAM-L, used in FRANCE (also called SECAM-West), and SECAM-B, used in Eastern European countries (also called SECAM-East).

1.This recorder can also receive SECAM-B colour television signals for recording and playback.

2.Recordings made of SECAM-B television signals produce monochrome pictures if played back on a video recorder of SECAM-L standard, or do not produce normal colour pictures if played back on a PAL video recorder with SECAM-B system incorporated (even if the TV set is SECAM-compatible).

3.SECAM-L prerecorded cassettes or recordings made with a SECAM-L video recorder produce monochrome pictures when played back with this recorder.

4.This recorder cannot be used for the SECAM-L standard. Use a SECAM-L recorder to record SECAM-L signals.

For Italy:

"It is declared that this product, brand JVC, conforms to the Ministry Decree n. 548 of 28 Aug.'95 published in the Official Gazette of the Italian Republic n. 301 of 28 Dec.'95"

The STANDBY/ON button does not completely shut off mains power from the unit, but switches operating

current on and off. " " shows electrical power standby and " " shows ON.

IMPORTANT

Please read the various precautions on this page before installing or operating the recorder.

It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video record- ing, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein.

Video tapes recorded with another recorder in the LP (Long Play) mode cannot be played back on this video recorder.

Failure to heed the following precautions may result in damage to the recorder, remote control or video cassette.

1. DO NOT place the recorder . . .

... in an environment prone to extreme temperatures or humidity.

... in direct sunlight.

... in a dusty environment.

... in an environment where strong magnetic fields are generated.

... on a surface that is unstable or subject to vibration.

2.DO NOT block the recorder’s ventilation openings.

3.DO NOT place heavy objects on the recorder or remote control.

4.DO NOT place anything which might spill on top of the recorder or remote control.

5.AVOID violent shocks to the recorder during transport.

MOISTURE CONDENSATION

Moisture in the air will condense on the recorder when you move it from a cold place to a warm place, or under extremely humid conditions—just as water droplets form in the surface of a glass filled with cold liquid. Moisture condensation on the head drum will cause damage to the tape. In conditions where condensation may occur, keep the recorder turned on for a few hours to let the moisture dry.

PAL

Cassettes marked "VHS" (or "S-VHS") can be used with this video cassette recorder, however, only VHS signals can be played back and recorded.

HQ VHS is compatible with existing VHS equipment.

ABOUT HEAD CLEANING

Accumulation of dirt and other particles on the video heads may cause the playback picture to become blurred or inter- rupted. Be sure to contact your nearest JVC dealer if such troubles occur.

Image 2
Contents HR-J250E Safety Precautions Do not place the recorderSituate Recorder Check ContentsBasic Connections Connect Recorder to MainsSET Video Channel Access Video Channel SET ModeVideo Channel Set Turn OFF the RecorderSET Date and Time Auto Set UpStart Auto SET UP Perform Auto Channel SETOn-Screen Displays Access Main Menu ScreenENABLE/DISABLE ON-SCREEN Display Turn on the RecorderColour System Set Return to Normal ScreenPoint Basic PlaybackLoad a Cassette Start PlaybackActivate HIGH-SPEED Search Playback FeaturesPlayback Manually Adjust TrackingOverride Automatic Tracking Activate Instant ReviewSkip Over Unwanted SectionsBasic Recording Recording Features Preparation S.T. Picture SystemEN Recording Recording PlaybackTimer Recording Express Timer ProgrammingAccess Programme Screen Enter Programme Start TimePress TV Prog + Engage RECORDER’S Timer ModeEnter Channel Position EN Timer Recording Check, Cancel And Replace ProgrammesPress OK or %to select Auto TimerSET, then press OK or % Either on or OFFMake Connections SET Recording DECK’S Input ModeEdit To Or From Another Video Recorder Start Source PlayerStart Camcorder SET RECORDER’S Input ModeEdit From a Camcorder Start RecorderAuto Channel Set Tuner SetEN Subsidiary Sett Ings Pointer next to Auto CHConfirmation screen After Scan Completed Is displayed on the screenFor about 5 seconds, Looking like the one toSU Bsidiary Settings Storing Channels ManuallyDelete Channel Perform TuningSelect Item Close ConfirmationChannel SET Screen Access ManualSwitch Stations Select NEW StationTV Station And ID List Station NameTurn the Recorder on Access Clock SET ScreenClock Set Start Clock OperationQuestions and Answer S E N Playback RecordingTroubleshooting Timer Recording Index Front ViewRear View Remote Control Specification S E N GeneralHR-J250E