Playback Setup, General features, Operations Discs

Playback Setup

•Turn the TV on and select the video input source connected to this unit.

•Audio System: Turn the Audio System on and select the input source connected to this unit. 1. Press OPEN/CLOSE (Z) to open the disc tray.

2. Load your chosen disc in the tray with the playback side down.

3.Press OPEN/CLOSE (Z) to close the tray.

READING appears on the display window, and playback starts automatically. If playback does not start, press PLAY (N).

In some cases, the disc menu might appear instead.

Buttons	Operations	Discs
OPEN/CLOSE (Z)	Opens or closes the disc tray.	ALL

STOP (x)	During playback, press STOP (x) to stop playback. The unit	ALL
	records the stop point depending on the disc. “Xx” appears
	on the screen briefly.
	If you press STOP (x) again, “x” appears on the screen
	and the unit will clear the stop point.

PAUSE (X)	During playback, press X to pause playback.	ALL

	Press X repeatedly to play Frame-by-Frame.	DVD	VCD

SKIP (./ >)	During playback, press SKIP (. or >) to go to the next	ALL
	chapter/track or to return to the beginning of the current
	chapter/track.
	Press SKIP (.) twice briefly to step back to the previous
	chapter/track.

REW/FF (m/ M)	During playback, press REW (m) or FF (M) repeatedly	DVD	VCD ACD
	to select the required scan speed.
	DVD: 4 steps
	Video CD, Audio CD: 3 steps

	While the playback is paused, press FF (M) repeatedly to	DVD	VCD
	play in slow motion (4 steps, forward only).

REPEAT	During playback, press REPEAT repeatedly to select a	ALL
	desired repeat mode.
	DVD Video discs: Chapter/Title/Off
	Video CD, Audio CD: Track/All/Off

Notes:

•If you press SKIP (>) once during Repeat Chapter playback, the repeat playback cancels.

•For Video CD with PBC, you must set PBC to Off on the Setup menu to use this function. (See “PBC” on page 18.)

REPEAT A-B	During playback, each press of REPEAT A-B button to	DVD VCD ACD
	select point A and point B and repeats a sequence from
	point A (Starting point) to point B (End point).

Note:

The A-B repeat function is available only in the current track.