Playing a DVD VR Format Disc, Handling the Unit

Playing a DVD VR Format Disc

This unit will play DVD-R/RW discs recorded using the DVD-Video format that have been finalized using a DVD-recorder.

•This unit will play DVD-RW discs recorded using the Video Recording (VR) format.

1.Insert a disc and close the tray, It start playing automatically.

2.The DVD-VR menu appears on the TV screen when you press DISC MENU buttons while play- ing.

3.Press v/ V to select a track then press PLAY (N) or ENTER and playback starts.

4.Press DISC MENU to move to the list menu.

Notes:

•Unfinalized DVD-R/RW discs cannot be played in this player.

•Some DVD-VR disc are made with CPRM data by DVD RECORDER. Player does not support these kinds of discs.

What is ‘CPRM’?

CPRM is a copy protection system (with scramble system) only allowing the recording of ‘copy once’ broadcast programs. CPRM stands for Content Protection for Recordable Media.

This player is CPRM compatible, which means that you can record copy-once broadcast programs, but you cannot then make a copy of those recordings. CPRM recordings can only be made on DVD-RW discs formatted in VR mode, and CPRM recordings can only be played on players that are specifically compatible with CPRM.

Maintenance and Service

Refer to the information in this chapter before contact- ing a service technician.

Handling the Unit

When shipping the unit

Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.

Keeping the exterior surfaces clean

•Do not use volatile liquids such as insecticide spray near the unit.

•Do not leave rubber or plastic products in contact with the unit for a long period of time since they leave marks on the surface.

Cleaning the unit

To clean the player, use a soft, dry cloth. If the sur- faces are extremely dirty, use a soft cloth lightly moist- ened with a mild detergent solution.

Do not use strong solvents such as alcohol, benzene, or thinner, as these might damage the surface of the unit.

Maintaining the Unit

The DVD+VCR is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished.

Depending on the operating environment, regular inspection and maintenance are recommended after every 1,000 hours of use.

For details, please contact your nearest authorized service center.