Displaying Disc Information on-screen - DVD
You can display various information about the disc loaded
1.Press DISPLAY to show various playback infor- mation.
The items displayed differ depending on the disc type or playing status.
1 / 3
1 / 12 0:20:09
ABC | 1 ENG |
1 / 1
3D SUR
2.You can select an item by pressing v/ V and change or select the setting by pressing b/ B.
•Title (Track) – Current title (or track) number/ total number of titles (or tracks)
•Chapter – Current chapter number/total number of chapters
•Time – Elapsed playing time
•Audio – Selected audio language or channel
•Subtitle – Selected subtitle
•Angle – Selected angle/total number of angles
•Sound – Selected sound mode
Note:
If no button is pressed for a few seconds, the on- screen display disappears.
Initial Settings - DVD
By using the DVD Setup menu, you can make vari- ous adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 17 - 18.
To display and exit the Menu:
Press SETUP MENU to display the menu. A second press of SETUP MENU will take you back to initial screen.
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
General Operation
1.Press DVD on the remote control.
2.Press SETUP MENU. The Setup menu appears.
3.Use v/ V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s).
4.Use v/ V to select the second desired option then press B to move to the third level.
5.Use v/ V to select the desired setting then press ENTER/OK to confirm your selection. Some items require additional steps.
6.Press SETUP MENU or PLAY (9) to exit the Setup menu.
16