JVC LPT0679-001B Do not place the recorder, Do not expose the apparatus to dripping or splashing

Page 2

2

SAFETY FIRST

Safety Precautions

The rating plate and the safety caution are on the rear of the unit.

WARNING: DANGEROUS VOLTAGE INSIDE

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION

8When you are not using the recorder for a long period of time, it is recommended that you disconnect the power cord from the mains outlet.

8Dangerous voltage inside. Refer internal servicing to qualified service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial.

IMPORTANT

Connection to the mains supply in the United Kingdom. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain a proper safety approved extension lead/adapter or consult your dealer.

In the unlikely event of the plug fuse failing be sure to replace the fuse only with an identical approved type, as originally fitted, and to replace the fuse cover. If the fuse fails again consult your nearest JVC dealer.

If nonetheless the mains plug is cut off remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.

If this product is not supplied fitted with a mains plug then follow the instructions given below:

DO NOT make any connection to the Larger Terminal coded E or Green.

The wires in the mains lead are coloured in accordance with the following code:

Blue to N (Neutral) or Black

Brown to L (Live) or Red

If these colours do not correspond with the terminal identifications of your plug, connect as follows:

Blue wire to terminal coded N (Neutral) or coloured Black. Brown wire to terminal coded L (Live) or coloured Red.

If in doubt — consult a competent electrician.

IMPORTANT

8Please read the various precautions on pages 2 – 3 before installing or operating the recorder.

8It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein.

The STANDBY/ON 1 button does not completely shut off mains power from the unit, but switches operating current on and off. “`” shows electrical power standby and “!” shows ON.

Video tapes recorded with this video recorder in the LP (Long Play) mode cannot be played back on a single-speed video recorder.

When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear.)

When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly.

Failure to heed the following precautions may result in damage to the recorder, remote control or video cassette.

1.DO NOT place the recorder ...

... in an environment prone to extreme temperatures or humidity.

... in direct sunlight.

... in a dusty environment.

... in an environment where strong magnetic fields are generated.

... on a surface that is unstable or subject to vibration.

2.DO NOT block the recorder’s ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

3.DO NOT place heavy objects on the recorder or remote control.

4.DO NOT place anything which might spill on top of the recorder or remote control.

(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

5.DO NOT expose the apparatus to dripping or splashing.

6.DO NOT use this equipment in a bathroom or places with water. Also DO NOT place any containers filled with water or liquids (such as cosmetics or medicines, flower vases, potted plants, cups, etc.) on top of this unit.

7.DO NOT place any naked flame sources, such as lighted candles, on the apparatus.

8.AVOID violent shocks to the recorder during transport.

MOISTURE CONDENSATION

Moisture in the air will condense on the recorder when you move it from a cold place to a warm place, or under extremely humid conditions—just as water droplets form in the surface of a glass filled with cold liquid. Moisture condensation on the head drum will cause damage to the tape. In conditions where condensation may occur, keep the recorder turned on for a few hours to let the moisture dry.

●Cassettes marked “S-VHS” and “VHS” can be used with this video cassette recorder. However, S-VHS recordings are possible only with cassettes marked “S-VHS”.

By using the S-VHS ET function, it is possible to record and play back with S-VHS picture quality on VHS cassettes with this recorder.

●Cassettes marked “Mini DV” can be used with the DV deck of this recorder. The DV deck can play back and record only PAL signals.

●VIDEO Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation. The VIDEO Plus+ system is manufactured under license from Gemstar Development Corporation.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Video Cassette Recorder Do not place the recorder Do not expose the apparatus to dripping or splashingSome Do’s And Don’ts On The Safe Use Of Equipment Above ALLFront View Rear View Do not remove itPDC* Indicator  pg Front Display PanelON-SCREEN Display for DV deck Remote Control VHSHow To Use Remote Control LCDCheck Contents Connect the recorder to TV Recorder and the TV’s 21-pin Scart connectorSituate the recorder Connect the recorder to mainsVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsAerial connector Turn on the recorder Auto Set UpPerform Auto Set Up Before starting, make sure of the followingOn the on-screen display Perform Preset DownloadPress rt to select CH - and press OK or e Just Clock  pg , Just ClockVCR Auto Standby NexTView Link TV Auto Power OnLink Functions Direct RecAttach the Satellite Controller Installing Satellite ControllerSituate the Satellite Controller Make connectionsSetting satellite receivers brand and channel Select the satellite receiver’s channel for testing Check the result of the testBasic Playback VHS deckStart recording Choose a programmeSet the tape speed Pause/Resume recordingActivate frame-by-frame playback Slow MotionPause during playback Index Search High-Speed Turbo SearchVariable Speed Search Skip SearchActivate Repeat Playback Next Function MemoryRepeat Playback Stop Repeat PlaybackManual Tracking Adjust the tracking manuallySoundtrack Selection Ntsc PlaybackRecording Resume Function Instant Timer Recording ITREngage the ITR mode Accidental erasure preventionSet the counter display Reset the counterTape Remaining Time Press 0000 before starting recording or playbackReceiving Stereo and Bilingual Programmes Engage the Record-Pause modeRetake Locate the start pointPlayback RecordingPress DV DV deckSelect the DV deck Find the programme start pointDV recording indicator turns off PLAYBACK/RECORDING on DV Deck Search, or 3 for reverse high-speed search For forward high-speed searchDuring playback, turn the JOG dial quickly to the right During playback or still, press 5 for forward high-speedRecording Features Time Code See Audio REC onEnter the PlusCode number Access the PlusCode displaySelect the deck Transmit the PlusCode numberCheck the programme data Set the PDC modeEngage the recorder’s timer mode Return to the normal screenAccess the Programme screen Express Timer ProgrammingAccess the PlusCode screen Enter the programme start timeEnter the programme date To Timer-Record Weekly Or Daily SerialsPDC Recording Enter the channel positionSet the programme start/stop time and channel Enter the programme modeBefore performing the 24 Hour Express Timer Programming For the VHS deckPage Cancel or change a programme Disengage the timer modeAccess the Programme screen/display Return to the timer modeSelect the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screenLoad cassettes Tape DubbingFrom DV to VHS Dubbing An Entire Cassette Select the dubbing directionPress DV, then press SP/LP p Dubbing direction indicator VHS lightsFrom VHS to DV Dubbing An Entire Cassette Prepare the VHS deck for dubbing From DV to VHSLocate the start point on the DV deck Pause dubbingLocate the start point on the VHS deck VHS playback indicator and DV recording indicator lightFrom VHS to DV Prepare the DV deck for dubbingSet the edit mode. VHS deck only Set the recorder’s input modeSelect the recording deck Start the camcorderRecorder Video input If the camcorder has no S-VIDEO output connectorSimultaneous Dubbing PlayerAdvantages of S-VHS video recorders Set the input mode of recording deckAnother Video Recorder Start the source playerPlayer Recorder RecorderAnother recorder Access the Main Menu screen Press rt to moveDecoder connector Select SettingVHS F-1 Input Setting Select the input mode for the Video Video connectorDV Audio Dubbing Audio DubbingVHS Audio Dubbing Pre-recorded tape Audio-dubbed tape CD player, etcPress A.DUB Engage the Audio Dubbing modeEnd Audio Dubbing VHS Insert Editing DV Insert Editing SP mode onlyInsert Editing Source tapePrepare the recording cassette Engage the Insert Editing modeAV Insert Editing VHS deck only Start EditingInsert a VHS or S-VHS cassette and a Mini DV cassette Access the R.A.Edit screenSelect the programme Press R.A.EDIT. The R.A.Edit screen appearsStart Random Assemble Editing Locate the end pointPrepare the source tape End Random Assemble EditingDisplay the code Change the remote control codeSet the remote control code Change the recorder’s codeSet the TV brand code TV Multi-Brand Remote ControlTV PR +/-, TV %+/- Volume, TV Muting, number keys Operate the TVOperate the satellite receiver Satellite Receiver Multi-Brand Remote ControlSet the satellite receiver brand code Digital printer About DV IN/OUT connectorTo DV in connector Outdoor unit Satellite cable Aerial ConnectorAerialPin Scart connector Mains outlet AUX in or Tape Monitor Make connectionsFM tuner CD player Stereo amplifier Speaker TelevisionSelect the mode Mode SetAccess the Mode Set screen Select the mode settingScreen Mode SETPowered back on Control, or press 7 on the recorderVHS Mode SET VHS Mode SET Picture reproduction is also linked to this function Using this video recorder as the source player for editingRental cassettes We recommend that you set Digital TBC/NR to on whenDV Mode SET Auto Channel Set Tuner also by Preset Download  pgTuner Set Perform Auto Channel SetView the Confirmation screen Manual Channel Set Select the item Delete a ChannelChange Station Channel Position Delete a channelSet Stations a Set Stations BSelect the channel to fine-tune Access the Manual Channel Set screenPerform tuning Press OK twice. The Manual Channel Set screen appearsTV Station And ID List Station NameTV Station Channel Number Guide Access the Clock Set screen Clock SetSet the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationGuide Program Number Video Plus+ System SetupGuide Program Number Set Enter the Guide Program numberNo power is supplied to the recorder Connect the mains power cordAdhesive tape, cover the hole where Recording cannot be startedThere is no cassette loaded, or Tab removed Tab was removedVHS deck DV deckTurn off the recorder or the connected Turn off the recorder once and connectNot connected between TV Recording Timer RecordingPlayback Hz to 20,000 Hz Hi-Fi audio Maximum recording time Scan systemLines VHS Lines S-VHS Frequency range Hz to 10,000 Express Timer Programming Auto Channel Set Auto Set UpClock Set Connecting To a Printer Preset Download Random Assemble EditingMemo
Top Page Image Contents