JVC HR-DVS3EK, LPT0617-001A PDC Recording, Enter the programme date, Enter the channel position

Page 39

39

H Enter the programme date.

Press DATE+/–.

●The current date appears on the TV screen. The date you enter appears in its place.

I Enter the channel position.

Press PR+/–.

●If you want to set a satellite

programme, press the number key “0” to change “TV PROG” to “SAT”, then press PR+/–.

NOTES:

●You can programme each deck to timer-record as many as 6 programmes. If you try to programme the recorder to record a seventh, “PROGRAM FULL” appears on the TV screen and “FULL” appears on the front display panel. To record the extra

programme, you must first cancel any unnecessary programmes ( pg. 42).

●It is not possible to timer-record a satellite broadcast received on the channel position “0” by the satellite receiver.

●It is not possible to timer-record the same programme on both the VHS deck and the DV deck simultaneously.

●During timer recording, it is not possible to change the recording deck (VHS or DV).

●If the times that are programmed for recording on the DV deck and on the VHS deck overlap, the earlier start time takes precedence. If the start times are the same, the VHS deck takes precedence.

J Set the tape speed.

Press SP/LP (p).

K Set the PDC mode.

Press PDC to select “ON” or “OFF”.

●If “VPS/PDC ON” is displayed on the TV screen or “VPS/PDC” is lit on the front display panel, PDC is set to ON.

●If “VPS/PDC OFF” is displayed on the TV screen or “VPS/PDC”

is not lit on the front display panel, PDC is set to OFF.  “PDC Recording” in the right column

●VPS (Video Programme System) recording is not currently available in the U.K. and not possible with this recorder.

L Return to the normal screen.

Press PROG or OK. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears. If “PROGRAM OVERLAPPED” appears on the TV screen and “Err” on the front display panel, see page 43.

●Repeat steps 3 – 12 for each additional programme.

M Engage the recorder’s timer mode.

Press # (TIMER). The recorder turns off automatically and “#” appears on the front display panel.

●To disengage the timer mode, press # (TIMER) again.

To Timer-Record Weekly Or Daily Serials . . .

. . . anytime during steps 5 through 11, press WEEKLY (number key “9”) for weekly serials or DAILY (number key “8”) for daily serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears on the TV screen. Pressing the button again makes the corresponding indication disappear.

Satellite Receiver Users

To timer-record a satellite broadcast using Express Timer Programming:

APerform “Satellite Receiver Control Setting” on page 17.

BPerform steps 1 – 13. In step 9, press the number key “0” to change “TV PROG” to “SAT”. The front display panel shows “L2” for the channel position. Then press PR+/– to enter the channel position for the satellite broadcast. In step 11, you cannot set “PDC” to “ON”.

CLeave the satellite receiver’s power on.

PDC Recording

Now available from some TV stations, PDC (Programme Delivery Control) is a service designed to assure safe, accurate timer recording. With this system, special code signals are transmitted together with the audio/video signals. These code signals control your video recorder and have precedence over the advertised times which you may have preset into the timer. This means that your recorder will start and stop recording when the preset TV programmes actually start and end — even if the broadcast time of a preset TV programme is changed from what has been advertised. PDC is currently available nationally on BBC1, BBC2, Ch.4 and Ch.5, except from a few small relay transmitters. Ch.3 operates a PDC service in some areas. All channels intend to offer this service in due course. Check your TV programme listing guide for latest information. If the channel you intend to record does not offer a PDC service your recorder will not start recording if PDC has been selected. Be sure to set PDC to “OFF” if PDC is not available on your selected channel. (See step 9 on page 37 and step 11 in the left column.

NOTES:

●Set the start time (PDC time) exactly as advertised in the TV listing. A different time than advertised will result in no recording.

●PDC recording is also possible when a satellite receiver or a cable system is connected to AV2 (L-2) IN/DECODER on your recorder.

●PDC recording is also possible via the AV1 (L-1) IN/OUT connector.

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Video Cassette Recorder Do not expose the apparatus to dripping or splashing Do not place the recorderAbove ALL Some Do’s And Don’ts On The Safe Use Of EquipmentFront View Do not remove it Rear ViewFront Display Panel PDC* Indicator  pgOn the tape BeginningEnd ON-SCREEN Display for VHS deckVHS Remote ControlRemote Control LCD How To UseCheck Contents Connect the recorder to mains Recorder and the TV’s 21-pin Scart connectorSituate the recorder Connect the recorder to TV8To connect to a TV with S-VIDEO/AUDIO in connectors Aerial connectorVideo Connection Before starting, make sure of the following Auto Set UpPerform Auto Set Up Turn on the recorderPerform Preset Download Press rt to select CH - and press OK or eOn the on-screen display  pg , Just Clock Just ClockDirect Rec NexTView Link TV Auto Power OnLink Functions VCR Auto StandbyMake connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite ControllerSetting satellite receivers brand and channel Check the result of the test Select the satellite receiver’s channel for testingVHS deck Basic PlaybackPause/Resume recording Choose a programmeSet the tape speed Start recordingSlow Motion Pause during playbackActivate frame-by-frame playback Skip Search High-Speed Turbo SearchVariable Speed Search Index SearchStop Repeat Playback Next Function MemoryRepeat Playback Activate Repeat PlaybackNtsc Playback Adjust the tracking manuallySoundtrack Selection Manual TrackingAccidental erasure prevention Instant Timer Recording ITREngage the ITR mode Recording Resume FunctionPress 0000 before starting recording or playback Reset the counterTape Remaining Time Set the counter displayLocate the start point Engage the Record-Pause modeRetake Receiving Stereo and Bilingual ProgrammesRecording PlaybackFind the programme start point DV deckSelect the DV deck Press DVDV recording indicator turns off PLAYBACK/RECORDING on DV Deck During playback or still, press 5 for forward high-speed For forward high-speed searchDuring playback, turn the JOG dial quickly to the right Search, or 3 for reverse high-speed searchRecording Features See Audio REC on Time CodeTransmit the PlusCode number Access the PlusCode displaySelect the deck Enter the PlusCode numberReturn to the normal screen Set the PDC modeEngage the recorder’s timer mode Check the programme dataEnter the programme start time Express Timer ProgrammingAccess the PlusCode screen Access the Programme screenEnter the channel position To Timer-Record Weekly Or Daily SerialsPDC Recording Enter the programme dateFor the VHS deck Enter the programme modeBefore performing the 24 Hour Express Timer Programming Set the programme start/stop time and channelPage Return to the timer mode Disengage the timer modeAccess the Programme screen/display Cancel or change a programmeOverlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modifySelect the dubbing direction Tape DubbingFrom DV to VHS Dubbing An Entire Cassette Load cassettesDubbing direction indicator VHS lights From VHS to DV Dubbing An Entire CassettePress DV, then press SP/LP p Pause dubbing From DV to VHSLocate the start point on the DV deck Prepare the VHS deck for dubbingPrepare the DV deck for dubbing VHS playback indicator and DV recording indicator lightFrom VHS to DV Locate the start point on the VHS deckStart the camcorder Set the recorder’s input modeSelect the recording deck Set the edit mode. VHS deck onlyIf the camcorder has no S-VIDEO output connector Recorder Video inputPlayer Start the source player Set the input mode of recording deckAnother Video Recorder Advantages of S-VHS video recordersRecorder Another recorderPlayer Recorder Press rt to move Access the Main Menu screenSelect the input mode for the Video Video connector Select SettingVHS F-1 Input Setting Decoder connectorPre-recorded tape Audio-dubbed tape CD player, etc Audio DubbingVHS Audio Dubbing DV Audio DubbingEngage the Audio Dubbing mode End Audio DubbingPress A.DUB Source tape DV Insert Editing SP mode onlyInsert Editing VHS Insert EditingStart Editing Engage the Insert Editing modeAV Insert Editing VHS deck only Prepare the recording cassettePress R.A.EDIT. The R.A.Edit screen appears Access the R.A.Edit screenSelect the programme Insert a VHS or S-VHS cassette and a Mini DV cassetteEnd Random Assemble Editing Locate the end pointPrepare the source tape Start Random Assemble EditingChange the recorder’s code Change the remote control codeSet the remote control code Display the codeOperate the TV TV Multi-Brand Remote ControlTV PR +/-, TV %+/- Volume, TV Muting, number keys Set the TV brand codeSatellite Receiver Multi-Brand Remote Control Set the satellite receiver brand codeOperate the satellite receiver About DV IN/OUT connector To DV in connectorDigital printer Aerial ConnectorAerial Pin Scart connector Mains outletOutdoor unit Satellite cable Speaker Television Make connectionsFM tuner CD player Stereo amplifier AUX in or Tape MonitorSelect the mode setting Mode SetAccess the Mode Set screen Select the modeControl, or press 7 on the recorder Mode SETPowered back on ScreenVHS Mode SET VHS Mode SET We recommend that you set Digital TBC/NR to on when Using this video recorder as the source player for editingRental cassettes Picture reproduction is also linked to this functionDV Mode SET Perform Auto Channel Set Tuner also by Preset Download  pgTuner Set Auto Channel SetView the Confirmation screen Manual Channel Set Delete a channel Delete a ChannelChange Station Channel Position Select the itemSet Stations B Set Stations aPress OK twice. The Manual Channel Set screen appears Access the Manual Channel Set screenPerform tuning Select the channel to fine-tuneStation Name TV Station And ID ListTV Station Channel Number Guide Clock Set Access the Clock Set screenStart the clock operation Set the date and timeSet Just Clock Set the source channel position for clock dataEnter the Guide Program number Video Plus+ System SetupGuide Program Number Set Guide Program NumberConnect the mains power cord No power is supplied to the recorderTab removed Tab was removed Recording cannot be startedThere is no cassette loaded, or Adhesive tape, cover the hole whereDV deck VHS deckTurn off the recorder once and connect Not connected between TVTurn off the recorder or the connected Timer Recording PlaybackRecording Scan system Lines VHS Lines S-VHS Frequency range Hz to 10,000Hz to 20,000 Hz Hi-Fi audio Maximum recording time Preset Download Random Assemble Editing Auto Channel Set Auto Set UpClock Set Connecting To a Printer Express Timer ProgrammingMemo
Top Page Image Contents