JVC HR-DVS3EK, LPT0617-001A specifications

Page 41

41

NOTES:

●You can programme each deck to timer-record as many as 6 programmes. If you try to programme the recorder to record a seventh, “PROGRAM FULL” appears on the TV screen and “FULL” appears on the front display panel. To record the extra

programme, you must first cancel any unnecessary programmes ( pg. 42).

●It is not possible to timer-record a satellite broadcast received on the channel position “0” by the satellite receiver.

●If “Err” appears on the front display panel, repeat the steps on page 40 again.

●When a menu screen is shown, you cannot use 24 Hour Express Timer Programming function. Press MENU to return to normal screen, and try again.

●You can use 24 Hour Express Timer Programming function also when the recorder is turned off.

●For 24 Hour Express Timer Programming function, the programme overlap warning display does not appear even if some programmes overlap each other. The programme with the lower programme number will be recorded and the other one will not be recorded correctly.

●It is not possible to timer-record the same programme on both the VHS deck and the DV deck simultaneously.

●During timer recording, it is not possible to change the recording deck (VHS or DV).

●If the times that are programmed for recording on the DV deck and on the VHS deck overlap, the earlier start time takes precedence. If the start times are the same, the VHS deck takes precedence.

●You cannot use 24 Hour Express Timer Programming function if you select the DV deck and set the channel to “F-1”.

Image 41

Contents Video Cassette Recorder Do not expose the apparatus to dripping or splashing Do not place the recorderAbove ALL Some Do’s And Don’ts On The Safe Use Of EquipmentFront View Do not remove it Rear ViewFront Display Panel PDC* Indicator pgOn the tape BeginningEnd ON-SCREEN Display for VHS deckVHS Remote ControlRemote Control LCD How To UseCheck Contents Situate the recorder Recorder and the TV’s 21-pin Scart connectorConnect the recorder to TV Connect the recorder to mainsVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsAerial connector Perform Auto Set Up Auto Set UpTurn on the recorder Before starting, make sure of the followingOn the on-screen display Perform Preset DownloadPress rt to select CH - and press OK or e pg , Just Clock Just ClockLink Functions NexTView Link TV Auto Power OnVCR Auto Standby Direct RecSituate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connectionsSetting satellite receivers brand and channel Check the result of the test Select the satellite receiver’s channel for testingVHS deck Basic PlaybackSet the tape speed Choose a programmeStart recording Pause/Resume recordingActivate frame-by-frame playback Slow MotionPause during playback Variable Speed Search High-Speed Turbo SearchIndex Search Skip SearchRepeat Playback Next Function MemoryActivate Repeat Playback Stop Repeat PlaybackSoundtrack Selection Adjust the tracking manuallyManual Tracking Ntsc PlaybackEngage the ITR mode Instant Timer Recording ITRRecording Resume Function Accidental erasure preventionTape Remaining Time Reset the counterSet the counter display Press 0000 before starting recording or playbackRetake Engage the Record-Pause modeReceiving Stereo and Bilingual Programmes Locate the start pointRecording PlaybackSelect the DV deck DV deckPress DV Find the programme start pointDV recording indicator turns off PLAYBACK/RECORDING on DV Deck During playback, turn the JOG dial quickly to the right For forward high-speed searchSearch, or 3 for reverse high-speed search During playback or still, press 5 for forward high-speedRecording Features See Audio REC on Time CodeSelect the deck Access the PlusCode displayEnter the PlusCode number Transmit the PlusCode numberEngage the recorder’s timer mode Set the PDC modeCheck the programme data Return to the normal screen Access the PlusCode screen Express Timer Programming Access the Programme screen Enter the programme start timePDC Recording To Timer-Record Weekly Or Daily SerialsEnter the programme date Enter the channel positionBefore performing the 24 Hour Express Timer Programming Enter the programme modeSet the programme start/stop time and channel For the VHS deckPage Access the Programme screen/display Disengage the timer modeCancel or change a programme Return to the timer modeConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenFrom DV to VHS Dubbing An Entire Cassette Tape DubbingLoad cassettes Select the dubbing directionPress DV, then press SP/LP p Dubbing direction indicator VHS lightsFrom VHS to DV Dubbing An Entire Cassette Locate the start point on the DV deck From DV to VHSPrepare the VHS deck for dubbing Pause dubbingFrom VHS to DV VHS playback indicator and DV recording indicator lightLocate the start point on the VHS deck Prepare the DV deck for dubbingSelect the recording deck Set the recorder’s input modeSet the edit mode. VHS deck only Start the camcorderPlayer If the camcorder has no S-VIDEO output connectorRecorder Video input Another Video Recorder Set the input mode of recording deckAdvantages of S-VHS video recorders Start the source playerPlayer Recorder RecorderAnother recorder Press rt to move Access the Main Menu screenVHS F-1 Input Setting Select SettingDecoder connector Select the input mode for the Video Video connectorVHS Audio Dubbing Audio DubbingDV Audio Dubbing Pre-recorded tape Audio-dubbed tape CD player, etcPress A.DUB Engage the Audio Dubbing modeEnd Audio Dubbing Insert Editing DV Insert Editing SP mode onlyVHS Insert Editing Source tapeAV Insert Editing VHS deck only Engage the Insert Editing modePrepare the recording cassette Start EditingSelect the programme Access the R.A.Edit screenInsert a VHS or S-VHS cassette and a Mini DV cassette Press R.A.EDIT. The R.A.Edit screen appearsPrepare the source tape Locate the end pointStart Random Assemble Editing End Random Assemble EditingSet the remote control code Change the remote control codeDisplay the code Change the recorder’s codeTV PR +/-, TV %+/- Volume, TV Muting, number keys TV Multi-Brand Remote ControlSet the TV brand code Operate the TVOperate the satellite receiver Satellite Receiver Multi-Brand Remote ControlSet the satellite receiver brand code Digital printer About DV IN/OUT connectorTo DV in connector Outdoor unit Satellite cable Aerial ConnectorAerialPin Scart connector Mains outlet FM tuner CD player Stereo amplifier Make connectionsAUX in or Tape Monitor Speaker TelevisionAccess the Mode Set screen Mode SetSelect the mode Select the mode settingPowered back on Mode SETScreen Control, or press 7 on the recorderVHS Mode SET VHS Mode SET Rental cassettes Using this video recorder as the source player for editingPicture reproduction is also linked to this function We recommend that you set Digital TBC/NR to on whenDV Mode SET Tuner Set Tuner also by Preset Download pgAuto Channel Set Perform Auto Channel SetView the Confirmation screen Manual Channel Set Change Station Channel Position Delete a ChannelSelect the item Delete a channelSet Stations B Set Stations aPerform tuning Access the Manual Channel Set screenSelect the channel to fine-tune Press OK twice. The Manual Channel Set screen appearsStation Name TV Station And ID ListTV Station Channel Number Guide Clock Set Access the Clock Set screenSet Just Clock Set the date and timeSet the source channel position for clock data Start the clock operationGuide Program Number Set Video Plus+ System SetupGuide Program Number Enter the Guide Program numberConnect the mains power cord No power is supplied to the recorderThere is no cassette loaded, or Recording cannot be startedAdhesive tape, cover the hole where Tab removed Tab was removedDV deck VHS deckTurn off the recorder or the connected Turn off the recorder once and connectNot connected between TV Recording Timer RecordingPlayback Hz to 20,000 Hz Hi-Fi audio Maximum recording time Scan systemLines VHS Lines S-VHS Frequency range Hz to 10,000 Clock Set Connecting To a Printer Auto Channel Set Auto Set UpExpress Timer Programming Preset Download Random Assemble EditingMemo