JVC LPT0617-001A Enter the programme mode, Set the programme start/stop time and channel

Page 40

40	TIMER RECORDING (cont.)

24 Hour Express Timer Programming

Before performing the 24 Hour Express Timer Programming:

●Make sure that the recorder’s built-in clock is set properly.

●Set the tape speed.

●Select the deck.

●For the VHS deck:

Insert a VHS (or S-VHS) cassette with the record safety tab intact.

For the DV deck:

Insert a Mini DV cassette with the erase protection switch set to “REC”.

You can programme a timer recording that starts within 24 hours using the JOG dial on the recorder.

A Enter the programme mode.

Press 24H EXPRESS # on the recorder. The start time indicator ( ) starts blinking on the front display panel.

●The current tape speed and VPS/PDC setting appear on the front display panel, but it is impossible to change the setting.

You can only change the setting after programming ( pg. 42).

B Set the programme start/stop time and channel.

Turn the JOG dial to the left or right to set the time you want recording to start.

●One click stop of the JOG dial changes the time in 5-minute intervals.

1

3

2

Push the JOG dial. The stop time indicator ( ) starts blinking on the front display panel. Turn the JOG dial to the left or right to set the time you want recording to stop.

Push the JOG dial. Turn the JOG dial to the left or right to select the channel you wish to record.

●You can cancel the setting at any time by pressing and holding the JOG dial for more than 3 seconds or pressing & on the remote control. Repeat the step 2.

C Engage the recorder’s timer mode.

Press 24H EXPRESS #. The recorder turns off automatically and “#” appears on the front display panel.

●To disengage the timer mode, press # (TIMER) or 24H EXPRESS # again.

Image 40

Contents Video Cassette Recorder Do not place the recorder Do not expose the apparatus to dripping or splashingSome Do’s And Don’ts On The Safe Use Of Equipment Above ALLFront View Rear View Do not remove itPDC* Indicator pg Front Display PanelON-SCREEN Display for VHS deck On the tape BeginningEndRemote Control VHSHow To Use Remote Control LCDCheck Contents Recorder and the TV’s 21-pin Scart connector Situate the recorderConnect the recorder to TV Connect the recorder to mainsAerial connector 8To connect to a TV with S-VIDEO/AUDIO in connectorsVideo Connection Auto Set Up Perform Auto Set UpTurn on the recorder Before starting, make sure of the followingPress rt to select CH - and press OK or e Perform Preset DownloadOn the on-screen display Just Clock pg , Just ClockNexTView Link TV Auto Power On Link FunctionsVCR Auto Standby Direct RecInstalling Satellite Controller Situate the Satellite ControllerAttach the Satellite Controller Make connectionsSetting satellite receivers brand and channel Select the satellite receiver’s channel for testing Check the result of the testBasic Playback VHS deckChoose a programme Set the tape speedStart recording Pause/Resume recordingPause during playback Slow MotionActivate frame-by-frame playback High-Speed Turbo Search Variable Speed SearchIndex Search Skip SearchNext Function Memory Repeat PlaybackActivate Repeat Playback Stop Repeat PlaybackAdjust the tracking manually Soundtrack SelectionManual Tracking Ntsc PlaybackInstant Timer Recording ITR Engage the ITR modeRecording Resume Function Accidental erasure preventionReset the counter Tape Remaining TimeSet the counter display Press 0000 before starting recording or playbackEngage the Record-Pause mode RetakeReceiving Stereo and Bilingual Programmes Locate the start pointPlayback RecordingDV deck Select the DV deckPress DV Find the programme start pointDV recording indicator turns off PLAYBACK/RECORDING on DV Deck For forward high-speed search During playback, turn the JOG dial quickly to the rightSearch, or 3 for reverse high-speed search During playback or still, press 5 for forward high-speedRecording Features Time Code See Audio REC onAccess the PlusCode display Select the deckEnter the PlusCode number Transmit the PlusCode number Set the PDC mode Engage the recorder’s timer mode Check the programme data Return to the normal screenExpress Timer Programming Access the PlusCode screenAccess the Programme screen Enter the programme start timeTo Timer-Record Weekly Or Daily Serials PDC RecordingEnter the programme date Enter the channel positionEnter the programme mode Before performing the 24 Hour Express Timer ProgrammingSet the programme start/stop time and channel For the VHS deckPage Disengage the timer mode Access the Programme screen/displayCancel or change a programme Return to the timer modeCancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Overlapping programmes blink on the TV screenTape Dubbing From DV to VHS Dubbing An Entire CassetteLoad cassettes Select the dubbing directionFrom VHS to DV Dubbing An Entire Cassette Dubbing direction indicator VHS lightsPress DV, then press SP/LP p From DV to VHS Locate the start point on the DV deckPrepare the VHS deck for dubbing Pause dubbingVHS playback indicator and DV recording indicator light From VHS to DVLocate the start point on the VHS deck Prepare the DV deck for dubbingSet the recorder’s input mode Select the recording deckSet the edit mode. VHS deck only Start the camcorderRecorder Video input If the camcorder has no S-VIDEO output connectorPlayer Set the input mode of recording deck Another Video RecorderAdvantages of S-VHS video recorders Start the source playerAnother recorder RecorderPlayer Recorder Access the Main Menu screen Press rt to moveSelect Setting VHS F-1 Input SettingDecoder connector Select the input mode for the Video Video connectorAudio Dubbing VHS Audio DubbingDV Audio Dubbing Pre-recorded tape Audio-dubbed tape CD player, etcEnd Audio Dubbing Engage the Audio Dubbing modePress A.DUB DV Insert Editing SP mode only Insert EditingVHS Insert Editing Source tapeEngage the Insert Editing mode AV Insert Editing VHS deck onlyPrepare the recording cassette Start EditingAccess the R.A.Edit screen Select the programmeInsert a VHS or S-VHS cassette and a Mini DV cassette Press R.A.EDIT. The R.A.Edit screen appearsLocate the end point Prepare the source tapeStart Random Assemble Editing End Random Assemble EditingChange the remote control code Set the remote control codeDisplay the code Change the recorder’s codeTV Multi-Brand Remote Control TV PR +/-, TV %+/- Volume, TV Muting, number keysSet the TV brand code Operate the TVSet the satellite receiver brand code Satellite Receiver Multi-Brand Remote ControlOperate the satellite receiver To DV in connector About DV IN/OUT connectorDigital printer Pin Scart connector Mains outlet Aerial ConnectorAerialOutdoor unit Satellite cable Make connections FM tuner CD player Stereo amplifierAUX in or Tape Monitor Speaker TelevisionMode Set Access the Mode Set screenSelect the mode Select the mode settingMode SET Powered back onScreen Control, or press 7 on the recorderVHS Mode SET VHS Mode SET Using this video recorder as the source player for editing Rental cassettesPicture reproduction is also linked to this function We recommend that you set Digital TBC/NR to on whenDV Mode SET Tuner also by Preset Download pg Tuner SetAuto Channel Set Perform Auto Channel SetView the Confirmation screen Manual Channel Set Delete a Channel Change Station Channel PositionSelect the item Delete a channelSet Stations a Set Stations BAccess the Manual Channel Set screen Perform tuningSelect the channel to fine-tune Press OK twice. The Manual Channel Set screen appearsTV Station And ID List Station NameTV Station Channel Number Guide Access the Clock Set screen Clock SetSet the date and time Set Just ClockSet the source channel position for clock data Start the clock operationVideo Plus+ System Setup Guide Program Number SetGuide Program Number Enter the Guide Program numberNo power is supplied to the recorder Connect the mains power cordRecording cannot be started There is no cassette loaded, orAdhesive tape, cover the hole where Tab removed Tab was removedVHS deck DV deckNot connected between TV Turn off the recorder once and connectTurn off the recorder or the connected Playback Timer RecordingRecording Lines VHS Lines S-VHS Frequency range Hz to 10,000 Scan systemHz to 20,000 Hz Hi-Fi audio Maximum recording time Auto Channel Set Auto Set Up Clock Set Connecting To a PrinterExpress Timer Programming Preset Download Random Assemble EditingMemo